Dikshit, Mithilesh K. and Puri, Asit B. and Maity, Atanu (2017) Analysis of rotational speed variations on cutting force coefficients in high-speed ball end milling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (9). pp. 3529-3539.

Full text not available from this repository.

Abstract

In high-speed ball end milling, cutting forces influence machinability, dimensional accuracy, tool deflection, tool failure, machine tool chatter and vibration, etc. Thus, an accurate prediction of cutting forces prior to actual machining is very much essential for a good insight into the process to produce good quality machined parts. In ball end milling, the cutting forces are proportional to the chip cross-sectional area and constant of proportionalities are referred as cutting force coefficients and they depend on many factors, like cutter geometry, cutting conditions, tool material and workpiece material properties. However, determining these specific cutting force coefficients in ball end milling process is not at all straightforward; rather it is fairly complex. Machining with higher cutting speed affects the chip formation mechanisms and finally causes a significant change in the cutting force coefficients. In the present study, the effect of rotational speeds has been investigated on the cutting force coefficients. A series of experiments have been performed at higher rotational speed. It has been found that the cutting force coefficients are influenced by rotational speed significantly. The results are also verified using experiments.

Item Type:	Article
Depositing User:	Dr. Sarita Ghosh
Date Deposited:	09 Nov 2018 10:29
Last Modified:	09 Nov 2018 10:29
URI:	http://cmeri.csircentral.net/id/eprint/450

Actions (login required)

View Item