Ghosh, Kunal and Mazumder, Subhrojyoti and Singh, Bipin Kumar and Hirani, Harish and Roy, Poulomi and Mandal, Nilrudra (2020) Tribological Property Investigation of Self-Lubricating Molybdenum-Based Zirconia Ceramic Composite Operational at Elevated Temperature. Journal of Tribology, 142 (2). pp. 1-8.

Pratap, Ayush and Kumar, Piyush and Singh, G.P and Mandal, Nilrudra and Singh, B.K. (2020) Effect of indentation load on mechanical properties and evaluation of tribological properties for zirconia toughened alumina. Materials Today: Proceedings, 26 (Part 2). pp. 2442-2446.

Singh, Bipin Kumar and Samanta, Suprakash and Roy, Shibendu Shekhar and Sahoo, Rashmi R and Roy, Himadri and Mandal, Nilrudra (2019) Evaluation of mechanical and frictional properties of CuO added MgO/ZTA ceramics. Materials Research Express, 6 (12).

Kumar, J Sharath and Ghosh, Souvik and Murmu, Naresh Chandra and Mandal, Nilrudra and Kuila, Tapas (2019) Electrochemical Detection of H₂O₂ Using Copper Oxide-Reduced Graphene Oxide Heterostructure. Journal of Nanoscience and Nanotechnology, 19 (8). pp. 5295-5302.

Singh, B K and Roy, H and Mondal, B and Roy, S S and Mandal, Nilrudra (2019) Measurement of chip morphology and multi criteria optimization of turning parameters for machining of AISI 4340 steel using Y-ZTA cutting insert. Measurement, 142. pp. 181-194.

Mazumder, Subhrojyoti and Kumar, Avinash and Singh, Bipin Kumar and Roy, Himadri and Mandal, Nilrudra (2019) Tribological investigation of MgO/Al2O3 ceramic composite with the inclusion of nano CuO in dry abrasive wear test. Materials Research Express, 6 (8).

Mazumder, Subhrojyoti and Barad, Bharat Bidhan and Show, Bijay Kumar and Mandal, Nilrudra (2019) Tribological property enhancement of 3Y-TZP ceramic by the combined effect of CaF2 and MgO phases. Ceramics International, 45 (10). pp. 13447-13455.

Mazumder, Subhrojyoti and Kumar, Om Prakash and Kotnees, Dinesh Kumar and Mandal, Nilrudra (2019) Tribological Influences of CuO Into 3Y-TZP Ceramic Composite in Conformal Contac. Journal of Tribology, 141 (3).

Singh, Bipin Kumar and Ghosh, Kunal and Roy, Shibendu Shekhar and Mondal, Biswanath and Mandal, Nilrudra (2018) Correlation between Microstructure and Mechanical Properties of YSZ/Al2O3 Ceramics and Its Effect on High Speed Machining of Steel. Transactions of the Indian Ceramic Society, 77 (4). pp. 219-225.

Singh, Bipin Kumar and Roy, Himadri and Mondal, Biswanath and Roy, Shibendu Sekhar and Mandal, Nilrudra (2018) Development and machinability evaluation of MgO doped Y-ZTA ceramic inserts for high-speed machining of steel. Machining Science and Technology- An International Journal, 22 (6). pp. 899-913.

Chhetri, Suman and Adak, Nitai Chandra and Samanta, Pranab and Mandal, Nilrudra and Kuila, Tapas and Murmu, Naresh Chandra (2018) Investigation of mechanical and thermal properties of the cetyltrimethylammonium bromide functionalized molybdenum disulfide (MoS2)/epoxy composites. Polymer Bulletin, 75 (1). pp. 327-343.

Gautam, Sujeet Kumar and Mandal, Nilrudra and Roy, Himadri and Lohar, Aditya Kumar and Samanta, Sudip Kumar and Sutradhar, Goutam (2018) Optimization of processing parameters of cooling slope process for semi-solid casting of ADC 12 Al alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (291). pp. 1-15.

Mandal, Nilrudra and Doloi, B. and Mondal, Biswanath and Singh, B.K. (2017) Multi-criteria optimization and predictive modeling of turning forces in high-speed machining of yttria based zirconia toughened alumina insert using desirability function approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (8). pp. 1396-1408.

Singh, B.K. and Mondal, B. and Mandal, Nilrudra (2016) Machinability evaluation and desirability function optimization of turning parameters for Cr2O3 doped zirconia toughened alumina (Cr-ZTA) cutting insert in high speed machining of steel. Ceramics International, 42 (2(B)). pp. 3338-3350.

Mandal, Nilrudra and Mondal, B. and Doloi, B. (2015) Application of Back Propagation Neural Network Model for Predicting Flank Wear of Yttria Based Zirconia Toughened Alumina (ZTA) Ceramic Inserts. Transactions of the Indian Institute of Metals, 68 (5). pp. 783-789.

Mondal, Biswanath and Mandal, Nilrudra and Doloi, Biswanath (2014) Development of Ce-PSZ-/Y-PSZ-Toughened Alumina Inserts for High-Speed Machining Steel. International Journal of Applied Ceramic Technology, 11 (2). pp. 228-239.

Mukherjee, Suprabhat and Mandal, Nilrudra and Dey, Apurba and Mondal, Biswanath (2014) An approach towards optimization of the extraction of polyphenolic antioxidants from ginger (Zingiber officinale). Journal of Food Science and Technology, 51 (11). pp. 3301-3308. ISSN 0022-1155

Mandal, Nilrudra and Doloi, B. and Mondal, B. (2013) Predictive modeling of surface roughness in high speed machining of AISI 4340 steel using yttria stabilized zirconia toughened alumina turning insert. Int. Journal of Refractory Metals and Hard Materials, 38. pp. 40-46. ISSN 0263-4368

Mandal, Nilrudra and Doloi, Biswanath and Mondal, Biswanath (2012) Force Prediction Model of Zirconia Toughened Alumina (ZTA) Inserts in Hard Turning of AISI 4340 Steel Using Response Surface Methodology. International Journal of Precision Engineering and Manufacturing, 13 (9). pp. 1589-1599.