Article

Maikap, A. and Mukherjee, K. and Mondal, B. and Mandal, N. and Meikap, A.K. (2019) A novel non-enzymatic zinc oxide thin film based electrochemical recyclable strip with device interface for quantitative detection of catechol in water. Biosensors and Bioelectronics, 128. pp. 32-36.

Sinha, M. and Mahapatra, R. and Mondal, B. and Ghosh, R. (2017) A High-Sensitivity Gas Sensor Toward Methanol Using ZnO Microrods: Effect of Operating Temperature. Journal of Electronic Materials, 46 (4). pp. 2476-2482.

Sengupta, D. and Mondal, B. and Mukherjee, K. (2017) Genesis of flake-like morphology and dye-sensitized solar cell performance of Al-doped ZnO particles: a study. Journal of Nanoparticle Research, 19. 100 (1-13).

Das, P. and Mondal, B. and Mukherjee, K. (2017) Chemi-resistive response of rutile titania nano-particles towards isopropanol and formaldehyde: a correlation with the volatility and chemical reactivity of vapors. Materials Research Express, 4 (1). 015503.

Mondal, B. and Mondal, S. and Mondal, A. and Mandal, N. (2016) Fish scale derived hydroxyapatite scaffold for bone tissue engineering. Materials Characterization, 121. pp. 112-124.

Sengupta, D. and Das, P. and Mondal, B. and Mukherjee, K. (2016) Effects of doping, morphology and film-thickness of photo-anode materials for dye sensitized solar cell application – A review. Renewable and Sustainable Energy Reviews, 60. pp. 356-376.

Mandal, N. and Mondal, S. and Mondal, A. and Mukherjee, K. and Mondal, B. (2016) Response surface modeling of Cu(II) removal from wastewater using fish scale-derived hydroxyapatite: application of Box–Behnken experimental design. Desalination and Water Treatment, 57 (33). pp. 15410-15423.

Usha, K. and Kumbhakar, P. and Mondal, B. (2016) Effect of Ag-doped TiO2 thin film passive layers on the performance of photo-anodes for dye-sensitized solar cells. Materials Science in Semiconductor Processing, 43. pp. 17-24.

Singh, B.K. and Mondal, B. and Mandal, Nilrudra (2016) Machinability evaluation and desirability function optimization of turning parameters for Cr2O3 doped zirconia toughened alumina (Cr-ZTA) cutting insert in high speed machining of steel. Ceramics International, 42 (2(B)). pp. 3338-3350.

Das , P. and Mondal, B. and Mukherjee, K. (2016) Hierarchical zinc oxide nano-tips and micro-rods: hydrothermal synthesis and improved chemi-resistive response towards ethanol. RSC Advances, 6 (2). pp. 1408-1414.

Mondal, B. and Chatterjee, D. (2016) Numerical Investigation of the Water Droplet Transport in a PEM Fuel Cell with Serpentine Flow Channel. Journal of Applied Fluid Mechanics, 9 (3). pp. 1057-1071. ISSN 1735-3572

Maikap, A. and Mukherjee, K. and Mondal, B. and Mandal, N. (2016) Zinc oxide thin film based nonenzymatic electrochemical sensor for the detection of trace level catechol. RSC Advances, 6 (69). 64611-64616 .

Usha, K. and Mondal, B. and Sengupta, D. and Kumbhakar, P. (2015) Photo-conversion efficiency measurement of dye-sensitised solar cell using nanocrystalline TiO2 thin film as photo-anodes. Measurement, 61. pp. 21-26.

Mandal, Nilrudra and Mondal, B. and Doloi, B. (2015) Application of Back Propagation Neural Network Model for Predicting Flank Wear of Yttria Based Zirconia Toughened Alumina (ZTA) Ceramic Inserts. Transactions of the Indian Institute of Metals, 68 (5). pp. 783-789.

Mahata , S. and Mondal, B. and Mahata, S.S. and Usha, K. and Mandal, N. and Mukherjee, K. (2015) Chemical modification of titanium isopropoxide for producing stable dispersion of titania nano-particles. Materials Chemistry and Physics, 151. pp. 267-274.

Goyal, H. and Mandal, N. and Roy, H. and Mitra, S.K. and Mondal, B. (2015) Multi Response Optimization for Processing Al–SiCp Composites: An Approach Towards Enhancement of Mechanical Properties. Transactions of the Indian Institute of Metals, 68 (3). pp. 453-463.

Das, P. and Sengupta, D. and Kasinadhuni, U. and Mondal, B. and Mukherjee, K. (2015) Nano-crystalline thin and nano-particulate thick TiO2 layer: Cost effective sequential deposition and study on dye sensitized solar cell characteristics. Materials Research Bulletin, 66. pp. 32-38.

Sengupta, D. and Mondal, B. and Mukherjee, K. (2015) Visible light absorption and photo-sensitizing properties of spinach leaves and beetroot extracted natural dyes. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 148. pp. 85-92.

Usha, K. and Mondal, B. and Sengupta, D. and Das, P. and Mukherjee, K. and Kumbhakar, P. (2014) Development of multilayered nanocrystalline TiO2 thin films for photovoltaic application. Optical Materials, 36 (6). pp. 1070-1075.

Karmakar, M. and Das, P. and Pal, M. and Mondal, B. and Majumder, S.B. and Mukherjee, K. (2014) Acetone and ethanol sensing characteristics of magnesium zinc ferrite nano-particulate chemi-resistive sensor. J Mater Sci, 49. pp. 5766-5771.

Karmakar, M. and Mondal, B. and Pal, M. and Mukherjee, K. (2014) Acetone and ethanol sensing of barium hexaferrite particles: A case study considering the possibilities of non-conventional hexaferrite sensor. Sensors and Actuators B: Chemical, 190. pp. 627-633. ISSN 0925-4005

Das, P. and Mondal, B. and Mukherjee, K. (2014) Facile synthesis of pseudo-peanut shaped hematite iron oxide nano-particles and their promising ethanol and formaldehyde sensing characteristics. RSC Advances, 4. pp. 31879-31886.

Sengupta, D. and Das, P. and Kasinadhuni, U. and Mondal, B. and Mukherjee, K. (2014) Morphology induced light scattering by zinc oxide polydisperse particles: Promising for dye sensitized solar cell application. Journal of Renewable and Sustainable Emergy , 6. 063114 (1-10).

Mondal, B. and Mandal, N. and Mondal, S. and Mukherjee, K. and Mukhopadhyay, S. and Dey, A. (2014) Optimisation of process parameters for fabrication of nanocrystalline TiO2–hydoxyapatite based scaffold using response surface methodology. Advances in Applied Ceramics, 113 (3). pp. 129-138.

Mondal, S. and Mondal, A. and Mandal, N. and Mondal, B. and Mukhopadhyay, S.S. and Dey, A. and Singh, S. (2014) Physico-chemical characterization and biological response of Labeo rohita-derived hydroxyapatite scaffold. Bioprocess and Biosystems Engineering, 37. pp. 1233-1240.

Mandal, Nilrudra and Doloi, B. and Mondal, B. (2013) Predictive modeling of surface roughness in high speed machining of AISI 4340 steel using yttria stabilized zirconia toughened alumina turning insert. Int. Journal of Refractory Metals and Hard Materials, 38. pp. 40-46. ISSN 0263-4368

Mahata, S. and Nandi, M.M. and Mondal, B. (2012) Preparation of high solid loading titania suspension in gelcasting using modified boiling rice extract (MBRE) as binder. Ceramics International, 38 (2). pp. 909-918.

Mandal, Nilrudra Mandal and Roy, H. and Mondal, B. and Murmu, N.C. and Mukhopadhyay, S.K. (2012) Mathematical Modeling of Wear Characteristics of 6061 Al-Alloy-SiCp Composite Using Response Surface Methodology. Journal of Materials Engineering and Performance, 21 (1). pp. 17-24. ISSN 1059-9495