Singh, R.K. and Ruj, Biswajit and Sadhukhan, A.K. and Gupta, P and Tigga, V.P. (2020) Waste plastic to pyrolytic oil and its utilization in CI engine: Performance analysis and combustion characteristics. Fuel, 262 (116539).

Full text not available from this repository.

Abstract

For application of pure plastic pyrolytic oil (PPO) several modifications in the engine is required which rejects the utilization of the existing engines while a blend of conventional fuel and PPO can be used with a slight change in engine without having a high impact on engine performance and hence the blends are preferred over the utilization of PPO as crude oil for diesel engines. In this study, the non-catalytic pyrolysis of mixed plastic waste at a temperature of 450 °C is done to obtain high-grade pyrolytic oil having a composition similar to petroleum fuels such as gasoline and diesel. Physical properties of the PPO were analysed, and the compound analysis was done with GC–MS. Further FTIR of PPO and diesel were analysed and compared. Five different ratios of 10, 20, 30, 40 and 50% PPO with diesel in blends were utilized as a fuel in a diesel engine to determine the engine performance and characteristics. The higher presence of PPO in blend increases the brake thermal efficiency (BTE) and reduces specific fuel consumption (SFC) with an increase in load as reported. The presence of PPO results in high heat release and delayed ignition resulting in high in-cylinder pressure. Further high amount of oxygenated compounds in PPO helps in reducing the emission from the combustion. The utilization of PPO with diesel upto 50% in the blend can be used in diesel engines with a slight increase in emission of CO at higher loads.

Item Type:	Article
Subjects:	Biodiesel
Depositing User:	Dr. Arup Kr. Nandi
Date Deposited:	29 Sep 2021 12:02
Last Modified:	29 Sep 2021 12:02
URI:	http://cmeri.csircentral.net/id/eprint/711

Actions (login required)

View Item