Das, Prosenjit and Dutta, Pradip (2020) Three-dimensional phase field simulation of spheroidal grain formation during semi solid processing of Al-7Si-0.3 Mg alloy. Computational Materials Science, 184 (109856).

Das, Prosenjit and Bhuniya, Bikash and Samanta, Sudip Kumar and Dutta, Pradip (2019) Studies on die filling of A356 Al alloy and development of a steering knuckle component using rheo pressure die casting system. Journal of Materials Processing Technology, 271. pp. 291-311.

Das, Prosenjit and Sudip K, Samanta and Mondal, Biswanath and Dutta, Pradip (2018) Multiphase Model of Semisolid Slurry Generation and Isothermal Holding During Cooling Slope Rheoprocessing of A356 Al Alloy. Metallurgical and Materials Transactions B, 49 (4). pp. 1925-1944.

Mondal , Manas Kumar and Das, Prosenjit and Karmakar, Nilabha and Banik, Nabanita (2017) Modelling of flow behaviour in a LD vessel by an impinging gas jet. Progress in Computational Fluid Dynamics, 17 (3). pp. 159-171.

Das, Prosenjit and Dutta, Pradip (2016) Phase field modelling of microstructure evolution and ripening driven grain growth during cooling slope processing of A356 Al alloy. Computational Materials Science, 125. pp. 8-19.

Das, Prosenjit and Samanta, Sudip K. and Bera, Supriya and Dutta, Pradip (2016) Microstructure Evolution and Rheological Behavior of Cooling Slope Processed Al-Si-Cu-Fe Alloy Slurry. Metallurgical and Materials Transactions A, 47 (5). pp. 2243-2256.

Das, Prosenjit and Islam, Sk. Tanbir and Samanta, Sudip K. and Das, Santanu (2016) Microscale deformation behavior of rheocast Al–7Si–0.3 Mg alloy. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230 (6). pp. 1041-1061.

Das, Prosenjit and Samanta, Sudip K. and Tiwari, Shashank and Dutta, Pradip (2015) Die Filling Behaviour of Semi Solid A356 Al Alloy Slurry During Rheo Pressure Die Casting. Transactions of the Indian Institute of Metals, 68 (6). pp. 1215-1220.

Das, Prosenjit and Samanta, Sudip K. and Dutta, Pradip (2015) Rheological Behavior of Al-7Si-0.3Mg Alloy at Mushy State. Metallurgical and Materials Transactions B, 46 (3). pp. 1302-1313.

Islam, Sk. Tanbir and Das, Prosenjit and Das, Santanu (2015) Deformation behaviour of Rheocast A356 Al alloy at microlevel considering approximated RVEs. Metals and Materials International, 21 (2). pp. 311-323.

Kumar, Santosh and Das, Prosenjit and Tiwari, Sandeep K. and Mondal, Manas K. and Bera, Supriya and Roy, Himadri and Samanta, Sudip K. (2015) Study of Microstructure Evolution during Semi-Solid Processing of an In-Situ Al Alloy Composite. Materials and Manufacturing Processes, 30 (3). pp. 356-366.

Das, Prosenjit and Show, Bijay K. and Rathore, Aakash and Samanta, Sudip K. (2015) Wear Behavior of Cooling Slope Rheocast A356 Al Alloy. Tribology Transactions, 58 (6). pp. 1054-1066.

Das, Prosenjit and Samanta, Sudip K. and Das, Reeta and Dutta, Pradip (2014) Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis. Measurement, 55. pp. 605-615. ISSN 0263-2241

Das, Prosenjit and Samanta, Sudip Kumar and Kumar, Pramod and Dutta, Pradip (2014) Phase Field Simulation of Equiaxed Microstructure Formation during Semi-solid Processing of A380 Al Alloy. ISIJ International, 54 (7). pp. 1601-1610.

Das, Prosenjit and Kumar, Manish and Samanta, Sudip K. and Dutta, Pradip and Ghosh, Debashis (2014) Semisolid Processing of A380 Al Alloy Using Cooling Slope. Materials and Manufacturing Processes, 29. pp. 422-428. ISSN 1042-6914

Das, Prosenjit and Dutta, Samik and Samanta, Sudip K (2013) Evaluation of primary phase morphology of cooling slope cast Al-Si-Mg alloy samples using image texture analysis. Proceeding of Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 227 (10). pp. 1474-1483.

Samanta, S.K. and Das, Prosenjit and Lohar, A.K. and Roy, H. and Kumar, S. and Chowdhury, A.K. (2013) A novel approach of manufacturing Nickel Wicks for loop heat pipes using Metal Injection Moulding (MIM). Sadhana, 38 (2). pp. 281-296.

Das, Prosenjit and Samanta, Sudip. K. and Venkatpathi, B. R. K. and Chattopadhyay, Himadri and Dutta, Pradip (2012) Microstructural Evolution of A356 Al Alloy During Flow Along a Cooling Slope. Transactions of the Indian Institute of Metals, 65 (6). pp. 669-672.

Das, Prosenjit and Samanta, Sudip K. and Chattopadhyay, Himadri and Dutta, Pradip (2012) Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy. Acta Metallurgica Sinica (English Letters), 25 (5). pp. 329-339.

Das, Prosenjit and Singh, I.V. and Jayaganthan, R. (2012) An Experimental Evaluation of Material Properties and Fracture Simulation of Cryorolled 7075 Al Alloy. Journal of Materials Engineering and Performance, 21 (7). pp. 1167-1181. ISSN 1059-9495

Das, Prosenjit and Singh, Indra Vir and Jayaganthan, R. (2012) Crack growth simulation of bulk and ultrafine grained 7075 Al alloy by XFEM. International Journal of Materials and Product Technology, 44 (3/4). pp. 252-276.