Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: Article
Number of items: 83.

Article

Arun, Ravi Kumar and Chaudhury, Kaustav and Ghosh, Moumita and Biswas, Gautam and Chanda , Nripen and Chakraborty, Suman (2014) Controlled splitting and focusing of a stream of nanoparticles in a converging–diverging microchannel. Lab on a Chip, 14 (19). pp. 3800-3808.

Arun, Ravi Kumar and Halder, Saurav and Chanda, Nripen and Chakraborty, Suman (2014) A paper based self-pumping and self-breathing fuel cell using pencil stroked graphite electrodes†. Lab on a Chip, 14. pp. 1661-1664. ISSN 1473-0197

Bala, Sukhen and Mondal, Indranil and Goswami, Arijit and Pal, Ujjwal and Mondal, Raju (2014) Synthesis, crystal structure and optical properties of a naphthylbisimide-Ni complex: a framework on TiO2 for visible light H2 production. Dalton Transactions, 43. pp. 15704-15707.

Barat, K. and Bar, H.N. and Mandal, D. and Roy, H. and Sivaprasad, S, and Tarafder, S. (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science & Engineering A, 597. pp. 37-45. ISSN 0921-5093

Bhattacharya, Dibyendu (2014) pH-driven structure modulations in cobalt(II) coordination polymers constructed from 2,2 '-bipyridine-5,5 '-dicarboxylic acid. Indian Journal of Chemistry, 53A. pp. 46-51.

Bhattacharya, Dibyendu (2014) A Luminescent Rhenium(I) Metallacycle with Oxygen and Nitrogen Donor Atoms: Photophysical and Theoretical Studies. Eur. J. Inorg. Chem. . pp. 2194-2199. ISSN 1099-0682

Chatterjee, D. and Jaiswal, N. and Schmeisser, M. and van Eldik, R. (2014) Ru(III)(EDTA) mediated S-nitrosylation of cysteine by nitrite. Dalton Transactions, 43 (48). pp. 18042-18046.

Chatterjee, Debabrata and Franke, Alicja and Oszajca, Maria and Eldik, Rudi van (2014) RuIII(edta) mediated oxidation of azide in the presence of hydrogen peroxide. Azide versus peroxide activation. Dalton Transactions, 43 (8). pp. 3087-3094.

Chatterjee, Debabrata and Jaiswal, Namita and Banerjee, Priyabrata (2014) Electrochemical Conversion of Bicarbonate to Formate Mediated by the Complex RuIII(edta) (edta4– = ethylenediaminetetraacetate). European Journal of Inorganic Chemistry, 2014 (34). pp. 5856-5859.

Chatterjee, Debabrata and Jaiswal, Namita and Franke, Alicja and Eldik, Rudi van (2014) Direct evidence for catalase activity of [RuV(edta)(O)]−. Chemical Communications, 50 (93). pp. 14562-14565.

Chatterjee, Debabrata and Moulik, Swapan Kumar and Lingamallu, Giribabu and Kanaparthi, Ravi Kumar (2014) Dye sensitization of a large band gap semiconductor by an iron(III) complex. Transition Metal Chemistry, 39 (6). pp. 641-646.

Chatterjee, Debabrata and Shome, Sanchari and Jaiswal, Namita and Banerjee, Priyabrata (2014) Nitrite reduction mediated by the complex RuIII(EDTA). Dalton Transactions, 43 (36). pp. 13596-13600.

Chatterjee, Debabrata and Shome, Sanchari and Jaiswal, Namita and Moi, S.C. (2014) Mechanism of the oxidation of thiosulfate with hydrogen peroxide catalyzed by aqua-ethylenediaminetetraacetatoruthenium(III). Journal of Molecular Catalysis A: Chemical, 386. pp. 1-4.

Chatterjee, Dipankar and Gupta, Satish Kumar (2014) Hydromagnetic Mixed Convective Transport in a Nonisothermally Heated Lid-Driven Square Enclosure Including a Heat-Conducting Circular Cylinder. Industrial and Engineering Chemistry Research, 53 (51). pp. 19775-19787.

Chatterjee, Dipankar and Gupta, Satish Kumar and Mondal, Bittagopal (2014) Mixed convective transport in a lid-driven cavity containing a nanofluid and a rotating circular cylinder at the center. International Communications in Heat and Mass Transfer, 56. pp. 71-78.

Chatterjee, Dipankar and Halder, Pabitra (2014) MHD Mixed Convective Transport in Square Enclosure with Two Rotating Circular Cylinders. Numerical Heat Transfer, Part A, 65. pp. 802-824. ISSN 1040-7782

Chatterjee, Dipankar and Mondal, Bittagopal and Halder, Pabitra (2014) Hydromagnetic mixed convective transport in a vertical lid-driven cavity including a heat conducting rotating circular cylinder. Numerical Heat Transfer, Part A: Applications, 65 (1). pp. 48-65.

Chatterjee, Dipankar and Ray, Sudipta (2014) Influence of thermal buoyancy on boundary layer separation over a triangular surface. International Journal of Heat and Mass Transfer, 79. pp. 769-782.

Chatterjee, Dipankar and Sinha, Chiranjit (2014) Influence of Thermal Buoyancy on Vortex Shedding Behind a Rotating Circular Cylinder in Cross Flow at Subcritical Reynolds Numbers. Journal of Heat Transfer, 136. 051704 (1-10).

Chatterjee , Dipankar (2014) Dual role of thermal buoyancy in controlling boundary layer separation around bluff obstacles. International Communications in Heat and Mass Transfer, 56. pp. 152-158.

Das, P. and Mondal, B. and Mukherjee, K. (2014) Facile synthesis of pseudo-peanut shaped hematite iron oxide nano-particles and their promising ethanol and formaldehyde sensing characteristics. RSC Advances, 4. pp. 31879-31886.

Das, Prosenjit and Kumar, Manish and Samanta, Sudip K. and Dutta, Pradip and Ghosh, Debashis (2014) Semisolid Processing of A380 Al Alloy Using Cooling Slope. Materials and Manufacturing Processes, 29. pp. 422-428. ISSN 1042-6914

Das, Prosenjit and Samanta, Sudip K. and Das, Reeta and Dutta, Pradip (2014) Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis. Measurement, 55. pp. 605-615. ISSN 0263-2241

Das, Prosenjit and Samanta, Sudip Kumar and Kumar, Pramod and Dutta, Pradip (2014) Phase Field Simulation of Equiaxed Microstructure Formation during Semi-solid Processing of A380 Al Alloy. ISIJ International, 54 (7). pp. 1601-1610.

Das, S. and Bhattacharya, A. and Ganguly, A. and Gu, Sai and Chatterjee, P.K. (2014) Kinetics and genetic algorithm study of acid catalysed hydrolysis of water hyacinth biomass. Journal of Renewable and Sustainable Energy, 6. 063115.

Das, Subhra Kanti and Mazumdar, Chandan and Banerjee, Kumardeb (2014) GPU accelerated novel particle filtering method. Computing, 96 (8). pp. 749-773.

Datta, Sarbari and Patkar, Umesh S. and Majumder, Somajyoti (2014) Attitude Controller for Steady Hover of a Rotary-Wing Flying Robot. Journal of Intelligent & Robotic Systems, 75 (3). pp. 609-623.

Datta, U. and Kundu, S. (2014) Performance of Multi Hop CDMA Wireless Sensor Networks with Nearest Neighbors Based Routing. International Journal of Sensor Networks, 15 (1). pp. 40-51.

Debbarma, Swarup R. and Saha, Showmen (2014) Behaviour of Concrete Beams reinforced with SMA and steel bars under cyclic and monotonic load. Magazine of Concrete Research, 66 (6). pp. 305-314.

Dora, C.L. and Murugan, T. and De, S. and Das, Debopam (2014) Role of slipstream instability in formation of counter-rotating vortex rings ahead of a compressible vortex ring. Journal of Fluid Mechanics, 753. pp. 29-48.

Dutta, Samik and Barat, Kaustav and Das, Arpan and Das, Swapan Kumar and Shukla, A.K. and Roy, Himadri (2014) Characterization of micrographs and fractographs of Cu-strengthened HSLA steel using image texture analysis. Measurement, 47. pp. 130-144. ISSN 0263-2241

Ghosh, D. and Mitra, S.K. (2014) High-Temperature Corrosion Behavior in Different Regions of 9 Cr-1 Mo Steel Weldment in SO2 + O2 Atmosphere. Journal of Materials Engineering and Performance, 23 (5). pp. 1703-1710.

Ghosh, Debasish and Mukherjee, S. and Das, S. (2014) High temperature oxidation behaviour of yttria (Y2O3) coated low alloy steel. Surface Engineering , 30 (7). pp. 524-528.

Ghosh, Pritam and Roychowdhury, Additi and Corbella, Montserrat and Bhaumik, Asim and Mitra, Partha and Mobin, Shaikh M. and Mukherjee, Ayan and Basu, Soumen and Banerjee, Priyabrata (2014) Designed synthesis of CO2-promoted copper(II) coordination polymers: synthesis, structural and spectroscopic characterization, and studies of versatile functional properties. Dalton Transactions, 43. pp. 13500-13508.

Hasan, Anwarul and Nurunnabi, Md and Morshed, Mahboob and Paul, Arghya and Polini, Alessandro and Kuila, Tapas and Hariri, Moustafa Al and Lee, Yong-Kyu and Jaffa , Ayad A. (2014) Recent Advances in Application of Biosensors in Tissue Engineering. Biomed Research International, 2014. 307519 (1-18).

Hens, Abhiram and Agarwal, Rahul and Biswas, Gautam (2014) Nanoscale study of boiling and evaporation in a liquid Ar film on a Pt heater using molecular dynamics simulation. International Journal of Heat and Mass Transfer, 71. pp. 303-312. ISSN 0017-9310

Hens, Abhiram and Biswas, Gautam and De, Sudipta (2014) Analysis of interfacial instability and multimode bubble formation in saturated boiling using coupled level set and volume-of-fluid approach. Physics of Fluids, 26. 012105 (1-14). ISSN 1070-6631

Jain, R.K. and Datta, S. and Majumder, S. (2014) Bio-mimetic behavior of IPMC using EMG signal for a micro robot. Mechanics Based Design of Structures and Machines, 42. pp. 398-417. ISSN 1539-7734

Jain, R.K. and Datta, S. and Majumder, S. and Dutta, A. (2014) Development of Multi Micro Manipulation System Using IPMC Micro Grippers. Journal of Intelligent & Robotic Systems, 74. pp. 547-569.

Jana, Milan and Khanra, Partha and Murmu, Naresh Chandra and Samanta, Pranab and Lee, Joong Hee and Kuila, Tapas (2014) Covalent surface modification of chemically derived graphene and its application as supercapacitor electrode material. Phys. Chem. Chem. Phys., 16. pp. 7618-7626.

Jana, Milan and Saha, Sanjit and Khanra, Partha and Murmu, Naresh Chandra and Srivastava, Suneel Kumar and Kuila, Tapas and Lee, Joong Hee (2014) Bio-reduction of graphene oxide using drained water from soakedmung beans (Phaseolus aureus L.) and its application as energy storageelectrode material. Materials Science and Engineering B, 186. pp. 33-40. ISSN 0921-5107

Jiang, Tongwu and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2014) Effects of surface-modified silica nanoparticles attached graphene oxide using isocyanateterminated flexible polymer chains on the mechanical properties of epoxy composites. Journal of Materials Chemistry A, 2. pp. 10557-10567.

Karmakar, M. and Das, P. and Pal, M. and Mondal, B. and Majumder, S.B. and Mukherjee, K. (2014) Acetone and ethanol sensing characteristics of magnesium zinc ferrite nano-particulate chemi-resistive sensor. J Mater Sci, 49. pp. 5766-5771.

Karmakar, M. and Mondal, B. and Pal, M. and Mukherjee, K. (2014) Acetone and ethanol sensing of barium hexaferrite particles: A case study considering the possibilities of non-conventional hexaferrite sensor. Sensors and Actuators B: Chemical, 190. pp. 627-633. ISSN 0925-4005

Karunanithi, R. and Ghosh, D. and Ghosh, K.S. and Bera, Supriya (2014) Influence of particle size of the dispersoid on compressibility and sinterability of TiO2 dispersed Al 7075 alloy composites prepared by mechanical milling. Advanced Powder Technology, 25 (5). pp. 1500-1509.

Khanra, Partha and Lee, Chang-No and Kuila, Tapas and Kim, Nam Hoon and Park, Min Jun and Lee, Joong Hee (2014) 7,7,8,8-Tetracyanoquinodimethane-assisted onestep electrochemical exfoliation of graphite and its performance as an electrode material. Nanoscale, 6. pp. 4864-4873. ISSN 2040-3364

Kim, Nam Hoon and Kuila, Tapas and Lee, Joong Hee (2014) Enhanced mechanical properties of a multiwall carbon nanotube attached pre-stitched graphene oxide filled linear low density polyethylene composite. Journal of Materials Chemistry A, 2. pp. 2681-2689.

Loha, Chanchal and Chattopadhyay, Himadri and Chatterjee, Pradip K. (2014) Effect of coefficient of restitution in Euler–Euler CFD simulation of fluidized-bed hydrodynamics. Particuology, 15. pp. 170-177.

Loha, Chanchal and Gu, Sai and Wilde, Juray De and Mahanta, Pinakeswar and Chatterjee, Pradip K. (2014) Advances in mathematical modeling of fluidized bed gasification. Renewable and Sustainable Energy Reviews, 40. pp. 688-715. ISSN 1364-0321

Loha, Chanchal and Chattopadhyay, Himadri and Chatterjee, Pradip K. (2014) Three dimensional kinetic modeling of fluidized bed biomass gasification. Chemical Engineering Science, 109. pp. 53-64. ISSN 0009-2509

Loveson, V.J. and Gujar, A.R. and Barnwal, R. and Khare, Richa and Rajamanickam, G.V. (2014) GPR studies over the tsunami affected Karaikal beach, Tamil Nadu, south India. Journal of Earth System Science, 123 (6). pp. 1375-1385.

Maji, Palash Kumar and Banerjee, Amit Jyoti and Banerjee, Partha Sarathi and Karmakar, Sankar (2014) Additive manufacturing in prosthesis development – a case study. Rapid Prototyping Journal, 20 (6). pp. 480-489. ISSN 1355-2546

Mandal, S. and Kumar, Arvind and Singh, R.K. and Ngachan, S.V. and Kundu, K. (2014) Drying, burning and emission characteristics of beehive charcoal briquettes: An alternative household fuel of Eastern Himalayan Region. Journal of Environmental Biology, 35. pp. 543-548. ISSN 0254-8704

Mandal, Soumen and Nagahanumaiah, Nagahanumaiah (2014) Assessment of thermally induced shear stress and its effect on pattern waviness in CO2 laser ablation of birefringent polymers. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 228 (2). pp. 97-103.

Mistry, Kalyan Kumar and Layek, Keya and Mahapatra , Abhijit and Roy Chaudhuri, Chirasree and Saha, Hiranmay (2014) A review on amperometric-type immunosensors based on screen-printed electrodes. Analyst, 139. pp. 2289-2311. ISSN 0003-2654

Mondal, B. and Mandal, N. and Mondal, S. and Mukherjee, K. and Mukhopadhyay, S. and Dey, A. (2014) Optimisation of process parameters for fabrication of nanocrystalline TiO2–hydoxyapatite based scaffold using response surface methodology. Advances in Applied Ceramics, 113 (3). pp. 129-138.

Mondal, Biswanath and Mandal, Nilrudra and Doloi, Biswanath (2014) Development of Ce-PSZ-/Y-PSZ-Toughened Alumina Inserts for High-Speed Machining Steel. International Journal of Applied Ceramic Technology, 11 (2). pp. 228-239.

Mondal, S. and Mondal, A. and Mandal, N. and Mondal, B. and Mukhopadhyay, S.S. and Dey, A. and Singh, S. (2014) Physico-chemical characterization and biological response of Labeo rohita-derived hydroxyapatite scaffold. Bioprocess and Biosystems Engineering, 37. pp. 1233-1240.

Mukherjee, A. and Banerjee, M. and Basu, S. and Thanh, Nguyen Thi Kim and Green, L.A.W. and Pal, M. (2014) Enhanced magnetic and electrical properties of Y and Mn co-doped BiFeO3 nanoparticles. Physica B: Condensed Matter, 448. pp. 199-203.

Mukherjee, A. and Basu, S. and Manna, P.K. and Yusuf, S.M. and Pal, M. (2014) Enhancement of multiferroic properties of nanocrystalline BiFeO3 powder by Gd-doping. Journal of Alloys and Compounds, 598. pp. 142-150. ISSN 0925-8388

Mukherjee, Ayan and Basu, Soumen and Manna, P.K. and Yusuf, S.M. and Pal, Mrinal (2014) Giant magnetodielectric and enhanced multiferroic properties of Sm doped bismuth ferrite nanoparticles. Journal of Materials Chemistry C, 2 (29). pp. 5885-5891.

Mukherjee, Suprabhat and Mandal, Nilrudra and Dey, Apurba and Mondal, Biswanath (2014) An approach towards optimization of the extraction of polyphenolic antioxidants from ginger (Zingiber officinale). Journal of Food Science and Technology, 51 (11). pp. 3301-3308. ISSN 0022-1155

Nandi, Arup Kumar (2014) GA-fuzzy based estimation of equivalent hardness of particle reinforced flexible mould material composites. Journal of Intelligent & Fuzzy Systems, 26 (6). pp. 2671-2683.

Nath, Peuli and Arun, Ravi Kumar and Chanda, Nripen (2014) A paper based microfluidic device for the detection of arsenic using a gold nanosensor†. RSC Adv., 4. 59558-–59561. ISSN 2046-2069

Pallav, K. and Han, P. and Ramkumar, J. and Nagahanumaiah, Nagahanumaiah and Ehmann, K.F. (2014) Comparative Assessment of the Laser Induced Plasma Micromachining and the Micro-EDM Processes. Journal of Manufacturing Science and Engineering, 136. 011001 (1-16).

Paunikar, Shweta and Kumar, Surendra (2014) Effect of CNT waviness on the effective mechanical properties of long and short CNT reinforced composites. Computational Materials Science, 95. pp. 21-28. ISSN 0927-0256

Ray, Sudipta and Chatterjee, Dipankar (2014) MHD Mixed Convection in a Lid-Driven Cavity Including Heat Conducting Solid Object and Corner Heaters with Joule Heating. Numerical Heat Transfer, Part A, 66. pp. 530-550. ISSN 1040-7782

Ray, Sudipta and Chatterjee, Dipankar (2014) MHD mixed convection in a lid-driven cavity including heat conducting circular solid object and corner heaters with Joule heating. International Communications in Heat and Mass Transfer, 57. pp. 200-207.

Roy, U. and Roy, H. and Daoud, H. and Glatzel, U. and Ray, K.K. (2014) Fracture toughness and fracture micromechanism in a cast AlCoCrCuFeNi high entropy alloys ystem. MaterialsLetters, 132. pp. 186-189. ISSN 0167-577X

RoyChowdhury, Additi and Ghosh, Pritam and Saha, Sourav Kr. and Mitra, Partha and Banerjee, Priyabrata (2014) Exploratory studies towards various anion recognition chemistry by two different sized cleft shaped organic ligands. Spectrochimica Acta Part A: Molecular and, 124. pp. 492-499. ISSN 1386-1425

Ruj, Biswajit and Ghosh, Subhajyoti (2014) Technological aspects for thermal plasma treatment of municipal solid waste—A review. Fuel Processing Technology, 126. pp. 298-308. ISSN 0378-3820

Saha, Atanu and Roy, H. and Shukla, A.K. (2014) Failure of a pendent reheater tube in a 110 MW thermal power plant. High Temperature Materials and Processes, 33. pp. 299-304.

Saha, Binod Kumar and Chattopadhyay, Himadri and Mandal, Pradipta Basu and Gangopadhyay, Tapas (2014) Dynamic simulation of a pressure regulating and shut-off valve. Computers & Fluids, 101. pp. 233-240.

Saha, Sanjit and Jana, Milan and Samanta, Pranab and Murmu, Naresh Chandra and Kim, Nam Hoon and Kuila, Tapas and Lee, Joong Hee (2014) Hydrothermal synthesis of Fe3O4/RGO composites and investigation of electrochemical performances for energy storage applications. RSC Advances, 4 (84). pp. 44777-44785.

Sahoo, R.R. and Biswas, S.K. (2014) Effect of Layered MoS2 Nanoparticles on the Frictional Behavior and Microstructure of Lubricating Greases. Tribology Letters, 53. pp. 157-171.

Sengupta, D. and Das, P. and Kasinadhuni, U. and Mondal, B. and Mukherjee, K. (2014) Morphology induced light scattering by zinc oxide polydisperse particles: Promising for dye sensitized solar cell application. Journal of Renewable and Sustainable Emergy , 6. 063114 (1-10).

Sharma, Pankaj and Roy, Himadri (2014) Pitting corrosion failure of an AISI stainless steel pointer rod. Engineering Failure Analysis, 44. pp. 400-407. ISSN 1350-6307

Shikha, Shikha and Das, S.K. and Pal, D. and Nandy, S. and Shome, S.N. and Banerjee, Soma (2014) Underwater terrain mapping with a 5-DOF AUV. Indian Journal of Geo-Marine Sciences, 43 (1). pp. 106-110.

Singh, Satya Prakash and Chatterjee, Dipankar (2014) Impact of transverse shear on vortex induced vibrations of a circular cylinder at low Reynolds numbers. Computers & Fluids, 93. pp. 61-73.

Usha, K. and Mondal, B. and Sengupta, D. and Das, P. and Mukherjee, K. and Kumbhakar, P. (2014) Development of multilayered nanocrystalline TiO2 thin films for photovoltaic application. Optical Materials, 36 (6). pp. 1070-1075.

Yan, Yinan and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2014) Effects of acid vapour mediated oxidization on the electrochemical performance of thermally exfoliated graphene. Carbon, 74. pp. 195-206. ISSN 0008-6223

Yu, Dong Sheng and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2014) Enhanced properties of aryl diazonium salt-functionalized graphene/poly(vinyl alcohol) composites. Chemical Engineering Journal, 245. pp. 311-322. ISSN 1385-8947

Zhang, Hang and Kuila, Tapas and Kim, Nam Hoon and Yu, Dong Sheng and Lee, Joong Hee (2014) Simultaneous reduction, exfoliation, and nitrogen doping of graphene oxide via a hydrothermal reaction for energy storage electrode materials. Carbon, 69. pp. 66-78. ISSN 0008-6223

This list was generated on Sat Dec 7 10:45:33 2024 IST.