Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | C | D | G | H | J | K | L | M | N | P | R | S | T | V
Number of items: 75.

B

Bandyopadhyay, Parthasarathi and Kuila, Tapas and Balamurugan, Jayaraman and Nguyen, Thanh Tuan and Kim, Nam Hoon and Lee, Joong Hee (2017) Facile synthesis of novel sulfonated polyaniline functionalized graphene using m-aminobenzene sulfonic acid for asymmetric supercapacitor application. Chemical Engineering Journal, 308. pp. 1174-1184.

Banerjee, A.J. and Roy, H. and Biswal, M.K. and Lohar, A.K. and Chattopadhyay, H. and Naga Hanumaiah, Naga Hanumaiah (2017) Investigation on Tensile Behaviour of Laser Welded Al–Mg–Sc–Zr In Situ TiB2 Reinforced Metal Matrix Composite. Transactions of the Indian Institute of Metals, 70 (8). pp. 2071-2077.

Banerjee, Soma and Saha, Monjoy and Indu, Arun and Basak, Bijan and Agarwal, Sanjit and Ahmed, Rosina and Chatterjee, Sanjoy and Mahanta, Lipi B. and Chakraborty, Chandan (2017) Near-set Based Mucin Segmentation in Histopathology Images for Detecting Mucinous Carcinoma. Journal of Medical Systems, 41. 144 (1-13).

Barnwal, Rajesh P. and Bharti, Sujeet and Misra, Sudip and Obaidat, Mohammad S. (2017) UCGNet: wireless sensor network‐based active aquifer contamination monitoring and control system for underground coal gasification. International Journal of Communication Systems, 30 (1). e2852.

Batabyal, Asit Kumar (2017) Hydrogeochemical processes and contaminants enrichment with special emphasis on fluoride in groundwater of Birbhum district, West Bengal, India. Environmental Earth Sciences, 76. 285 (1-23).

Batabyal, Asit Kumar and Gupta, Srimanta (2017) Fluoride-contaminated groundwater of Birbhum district, West Bengal, India: Interpretation of drinking and irrigation suitability and major geochemical processes using principal component analysis. Environmental Monitoring and Assessment, 189. 369 (1-24).

Biswas, Prosanta and Mondal, Manas Kumar and Roy, Himadri and Mandal, Durbadal (2017) Microstructural evolution and hardness property of in situ Al–Mg2Si composites using one-step gravity casting method. Canadian Metallurgical Quarterly, 56 (3). pp. 340-348.

C

Chattaraj, Ritwik and Khan, Siladitya and Dasgupta, Aritra and Gare, Gautam and Chatterjee, Debabrata and Bhaumik, Subhasis (2017) An iteratively optimized resolution to hyper redundancy for dissimilarly doped compliant IPMC actuators. Mechatronics, 46. pp. 154-167.

Chatterjee, Abhijit and Das, Debashis and Sadhukhan, Anup Kumar and Chatterjee, Pradip Kumar (2017) Probabilistic Assessment of UPV Test Result of a Degasser Unit. Journal of Nondestructive Evaluation, 36. 18 (1-10).

Chatterjee, Debabrata and Eldik, Rudi van (2017) RuIII(EDTA) mediated activation of redox signalling molecules. Coordination Chemistry Reviews , 349. pp. 129-138.

Chatterjee, Dipankar and Gupta, Krishan and Kumar, Virendra and Varghese, Sachin Abraham (2017) Rotation induced flow suppression around two tandem circular cylinders at low Reynolds number. Fluid Dynamics Research, 49 (4). 045503.

Chatterjee, Dipankar and Gupta, Satish Kumar (2017) Magnetohydrodynamic Natural Convection in a Square Enclosure with Four Circular Cylinders Positioned at Different Rectangular Locations. Heat Transfer Engineering, 38 (17). pp. 1449-1465.

Chatterjee, M. and Hens, A. and Mahato, K. and Jaiswal, N. and Mahato, N. and Nagahanumaiah, Nagahanumaiah and Chanda , N. (2017) A novel approach to fabricate dye-encapsulated polymeric micro- and nanoparticles by thin film dewetting technique. J Colloid Interface Sci., 506. pp. 126-134.

Chatterjee, S. and Banerjee, P. and Sukul, D. and Chattopadhyay, T. (2017) Al2O3 supported-Fe-III Schiff base complexes : Syntheses, characterizations and their applications in various oxidation reactions. Journal of the Indian Chemical Society, 94 (5). pp. 489-495.

Chattopadhyay, Himadri and Samanta, Sudip K. and Biswas, Gautam and Sharma, Bharat B. (2017) Direct numerical simulation of evaporation in a biporous media. Journal of Mechanical Science and Technology, 31 (6). pp. 2635-2641.

Chhetri, Suman and Adak, Nitai Chandra and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2017) Functionalized reduced graphene oxide/epoxy composites with enhanced mechanical properties and thermal stability. Polymer Testing, 63. pp. 1-11.

D

Das, P. and Mondal, B. and Mukherjee, K. (2017) Chemi-resistive response of rutile titania nano-particles towards isopropanol and formaldehyde: a correlation with the volatility and chemical reactivity of vapors. Materials Research Express, 4 (1). 015503.

Das, Priyanka and Mondal, Biswanath and Mukherjee, Kalisadhan (2017) Simultaneous Adsorption–Desorption Processes in the Conductance Transient of Anatase Titania for Sensing Ethanol: A Distinctive Feature with Kinetic Perception. Journal of Physical Chemistry C, 121 (2). pp. 1146-1152.

De, Bibekananda and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2017) Carbon dot stabilized copper sulphide nanoparticles decorated graphene oxide hydrogel for high performance asymmetric supercapacitor. Carbon, 122. pp. 247-257.

Dikshit, Mithilesh and Puri, Asit B. and Maity, Atanu (2017) Analysis of cutting force coefficients in high-speed ball end milling at varying rotational speeds. Machining Science and Technology, 21 (3). pp. 416-435.

Dikshit, Mithilesh K. and Puri, Asit B. and Maity, Atanu (2017) Analysis of rotational speed variations on cutting force coefficients in high-speed ball end milling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (9). pp. 3529-3539.

Dikshit, Mithilesh K. and Puri, Asit B. and Maity, Atanu (2017) Modelling and application of response surface optimization to optimize cutting parameters for minimizing cutting forces and surface roughness in high-speed, ball-end milling of Al2014-T6. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (12). pp. 5117-5133.

Dikshit, Mithilesh K. and Puri, Asit B. and Maity, Atanu (2017) Optimization of surface roughness in ball-end milling using teaching-learning-based optimization and response surface methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (14). pp. 2596-2607.

Dikshit, Mithilesh K. and Puri, Asit B. and Maity , Atanu (2017) Chatter and dynamic cutting force prediction in high-speed ball end milling. Machining Science and Technology , 21 (2). pp. 291-312.

Dutta, Alokdut and Saha, Sourav Kr. and Adhikari, Utpal and Banerjee, Priyabrata and Sukul, Dipankar (2017) Effect of substitution on corrosion inhibition properties of 2-(substituted phenyl) benzimidazole derivatives on mild steel in 1 M HCl solution: A combined experimental and theoretical approach. Corrosion Science , 123. pp. 256-266.

Dutta, Debeshi and Modak, Satyanarayan and Kumar, Anirudh and Roychowdhury, Joydeb and Mandal, Soumen (2017) Bayesian network aided grasp and grip efficiency estimation using a smart data glove for post-stroke diagnosis. Biocybernetics and Biomedical Engineering, 37 (1). pp. 44-58.

Dutta, Subhasish and Basak, Bikram and Bhunia, Biswanath and Sinha, Ankan and Dey, Apurba (2017) Approaches towards the enhanced production of Rapamycin by Streptomyces hygroscopicus MTCC 4003 through mutagenesis and optimization of process parameters by Taguchi orthogonal array methodology. World Journal of Microbiology and Biotechnology, 33 (5). 90 (1-13).

G

Ghosh, Bhaskar and Jain, R.K. and Majumder, S. and Roy, S.S. and Mukhopadhyay, S. (2017) Experimental performance evaluation of smart bimorph piezoelectric actuator and its application in micro robotics. Microsystem Technologies, 23 (10). pp. 4619-4635.

Ghosh, Bhaskar and Jain, Ravi K. and Majumder, S. and Roy, S.S. and Mukhopadhyay, S. (2017) Experimental characterizations of bimorph piezoelectric actuator for robotic assembly. Journal of Intelligent Material Systems and Structures, 28 (15). pp. 2095-2109.

Ghosh, Pritam and Banerjee, Priyabrata (2017) Small molecular probe as selective tritopic sensor of Al3+, F− and TNP: Fabrication of portable prototype for onsite detection of explosive TNP. Analytica Chimica Acta, 965. pp. 111-122.

Ghosh, Pritam and Das, Joyee and Basak, Amit and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2017) Nanomolar level detection of explosive and pollutant TNP by fluorescent aryl naphthalene sulfones: DFT study, in vitro detection and portable prototype fabrication. Sensors and Actuators B: Chemical, 251. pp. 985-992.

Ghosh, Pritam and Paul, Suparna and Banerjee, Priyabrata (2017) How explosive TNP interacts with a small tritopic receptor: a combined crystallographic and thermodynamic approach. CrystEngComm, 19 (44). 6703-6710 .

Ghosh, Pritam and Roy, Partha and Ghosh, Ananta and Jana, Saibal and Murmu, Naresh Chandra and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2017) Explosive and pollutant TNP detection by structurally flexible SOFs: DFT-D3, TD-DFT study and in vitro recognition. Journal of Luminescence, 185. pp. 272-278.

Giri, Santu Kr. and Chakrabarti, Sibaprasad and Banerjee, Subrata and Chakraborty, Chandan (2017) A Carrier-Based PWM Scheme for Neutral Point Voltage Balancing in Three-Level Inverter Extending to Full Power Factor Range. IEEE Transactions on Industrial Electronics , 64 (3). pp. 1873-1883. ISSN 0278-0046

H

Halder, Shibashis and Ghosh, Pritam and Rizzoli, Corrado and Banerjee, Priyabrata and Roy, Partha (2017) Nitroaromatic explosives detection by a luminescent Cd(II) based metal organic framework. Polyhedron, 123. pp. 217-225.

J

Jain, R.K. and Majumder, S. and Ghosh, Bhaskar and Saha, Surajit (2017) Analysis of multiple robotic assemblies by cooperation of multimobile micromanipulation systems (M4S). The International Journal of Advanced Manufacturing Technology, 91 (9-12). pp. 3033-3050.

Jana, Milan and Saha, Sanjit and Samanta, Pranab and Murmu, Naresh Chandra and Kim, Nam Hoon and Kuila, Tapas and Lee, Joong Hee (2017) A successive ionic layer adsorption and reaction (SILAR) method to fabricate a layer-by-layer (LbL) MnO2-reduced graphene oxide assembly for supercapacitor application. Journal of Power Sources, 340. pp. 380-392.

Jana, Milan and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2017) Morphology controlled synthesis of MnCO3–RGO materials and their supercapacitor applications. Journal of Materials Chemistry A, 5 (25). 12863-12872 .

Jana, Milan and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2017) Surface modification of reduced graphene oxide through successive ionic layer adsorption and reaction method for redox dominant supercapacitor electrodes. Chemical Engineering Journal, 330. pp. 914-925.

K

K.P., Lijesh and Kumar, Deepak and Hirani, Harish (2017) Synthesis and field dependent shear stress evaluation of stable MR fluid for brake application. Industrial Lubrication and Tribology, 69 (5). pp. 655-665.

Kaur Sodhi, Amanpreet and Tripathi, Sonal and Kundu, Krishnendu (2017) Biodiesel production using waste cooking oil: a waste to energy conversion strategy. Clean Technologies and Environmental Policy, 19 (6). pp. 1799-1807. ISSN 1618-954X

Kaya, Cemal and Kaya, Savaş and Banerjee, Priyabrata (2017) A novel lattice energy calculation technique for simple inorganic crystals. Physica B: Condensed Matter, 504. pp. 127-132.

Khan, Ajahar and Inamuddin, Inamuddin and Jain, Ravi Kant and Asiri, Abdullah M. (2017) Thorium (IV) phosphate‐polyaniline composite‐based hydrophilic membranes for bending actuator application. Polymer Engineering & Science, 57 (3). pp. 258-267.

Khan, Ajahar and Jain, Ravi Kant and Banerjee, Priyabrata and Inamuddin, Inamuddin and Asiri, Abdullah M. (2017) Soft actuator based on Kraton with GO/Ag/Pani composite electrodes for robotic applications. Materials Research Express, 4 (11). p. 115701.

Kumar, N. and Mohapatra, S.K. and Ragit, S.S. and Kundu, K. and Karmakar, R. (2017) Optimization of safflower oil transesterification using the Taguchi approach. Petroleum Science, 14 (4). 798-805 |.

Kundu, Abhishek and De, Sudipta (2017) Navier–Stokes simulation of shock-heavy bubble interaction: Comparison of upwind and WENO schemes. Computers & Fluids, 157. pp. 131-145.

Kundu, Abhishek and De, Sudipta (2017) Navier–Stokes simulation of slipstream evolution in steady shock reflection. Journal of Visualization, 20 (3). pp. 515-518.

L

Laha, S.K. (2017) Enhancement of fault diagnosis of rolling element bearing using maximum kurtosis fast nonlocal means denoising. Measurement, 100. pp. 157-163.

Lijesh, K.P. and Kumar, Deepak and Hirani, Harish (2017) Effect of disc hardness on MR brake performance. Engineering Failure Analysis, 74. pp. 228-238.

M

Mandal, Nilrudra and Doloi, B. and Mondal, Biswanath and Singh, B.K. (2017) Multi-criteria optimization and predictive modeling of turning forces in high-speed machining of yttria based zirconia toughened alumina insert using desirability function approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (8). pp. 1396-1408.

Meena, Vijay Kumar and Azad, Man Singh and Singh, Suman and Singh, Narinder (2017) Micro-EDM multiple parameter optimization for Cp titanium. The International Journal of Advanced Manufacturing Technology, 89 (1-4). pp. 897-904.

Mishra, Srimant Kumar and Roy, H. and Mondal, A.K. and Dutta, Krishna (2017) Damage Assessment of A356 Al Alloy Under Ratcheting–Creep Interaction. Metallurgical and Materials Transactions A, 48 (6). pp. 2877-2885.

Mondal, Bittagopal and Lopez, Carlos F. and Mukherjee, Partha (2017) Exploring the efficacy of nanofluids for lithium-ion battery thermal management. International Journal of Heat and Mass Transfer, 112. pp. 779-794.

Mondal , Manas Kumar and Das, Prosenjit and Karmakar, Nilabha and Banik, Nabanita (2017) Modelling of flow behaviour in a LD vessel by an impinging gas jet. Progress in Computational Fluid Dynamics, 17 (3). pp. 159-171.

N

Nayak, Bibhuti Bhusan and Chatterjee, Dipankar (2017) Convective heat transfer in slurry flow in a horizontal Y-shaped branch pipe. Powder Technology, 318. pp. 46-61.

Nayak, Bibhuti Bhusan and Chatterjee, Dipankar (2017) Numerical investigation of convective heat transfer in pipeline flow of multi-sized mono dispersed fly ash-water slurry. International Journal of Heat and Mass Transfer, 108 (Part B). pp. 1802-1818.

Nayak, Bibhuti Bhusan and Chatterjee, Dipankar and Mullick, Amar Nath (2017) Numerical prediction of flow and heat transfer characteristics of water-fly ash slurry in a 180° return pipe bend. International Journal of Thermal Sciences, 113. pp. 100-115.

P

Patel, Manoj Kumar and Praveen, Bushra and Sahoo, Hemant Kumar and Patel, Bharat and Kumar, Ashwani and Singh, Manjeet and Nayak, Manoj Kumar and Rajan, Pradeep (2017) An advance air-induced air-assisted electrostatic nozzle with enhanced performance. Computers and Electronics in Agriculture, 135. pp. 280-288.

Prabhansu, Prabhansu and Rajmistry, S. and Ganguli, Sourav and Chandra, P. and Karmakar, M. Kr. and Chatterjee , P. Kr. (2017) Numerical analysis of gas-solid behavior in a cyclone separator for circulating fluidized bed system. Journal of Applied Fluid Mechanics, 10 (4). pp. 1167-1176.

R

Roy, Pialee and Saha, Sourav Kr. and Banerjee, Priyabrata and Dey, Sukalpa and Sukul, Dipankar (2017) Experimental and theoretical investigation towards anti-corrosive property of glutamic acid and poly-γ-glutamic acid for mild steel in 1 M HCl: intramolecular synergism due to copolymerization. Research on Chemical Intermediates, 43 (8). pp. 4423-4444.

Roy, Spandan and Nandy, Sambhunath and Kar, Indra Narayan and Ranjit, Ranjit and Shome, Sankar Nath (2017) Robust control of nonholonomic wheeled mobile robot with past information: Theory and experiment. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering , 231 (3). pp. 178-188.

Roy Chowdhury, Additi and Banerjee, Priyabrata (2017) A simple hydrazine based molecule for selective detection of Fluoride ion in DMSO. Download PDF Journal of Chemical Sciences, 129 (4). pp. 463-470.

Roy Chowdhury, Additi and Ghosh, Pritam and Paul, Suparna and Bhuyan, Samuzal and K., Jagadeesh C. Bose and Mukhopadhyay, Sudit and Banerjee, Priyabrata (2017) A novel ditopic chemosensor for cadmium and fluoride and its possible application as a pH sensor. Analytical Methods, 9 (1). pp. 124-133.

Roy Chowdhury, Additi and Mondal, Amita and Roy, Biswajit Gopal and K., Jagadeesh C. Bose and Mukhopadhyay, Sudit and Banerjee, Priyabrata (2017) Hydrazine functionalized probes for chromogenic and fluorescent ratiometric sensing of pH and F−: experimental and DFT studies. Photochemical & Photobiological Sciences, 16 (11). 1654-1663 .

RoyChowdhury, Additi and Roy, Biswajit Gopal and Jana, Saibal and Weyhermuller, Thomas and Banerjee, Priyabrata (2017) A simple cleft shaped hydrazine-functionalized colorimetric new Schiff base chemoreceptor for selective detection of F− in organic solvent through PET signaling: Development of a chemoreceptor based sensor kit for detection of fluoride. Sensors and Actuators B: Chemical, 241. pp. 706-715.

S

Saha, Ramesh P. and Choudhury, Biplab and Das, Ranadip K. and Sur, Anirban (2017) An overview of modelling techniques employed for performance simulation of low–grade heat operated adsorption cooling systems. Renewable and Sustainable Energy Reviews, 74. pp. 364-376.

Saha, Sanjit and Jana, Milan and Samanta, Pranab and Murmu, Naresh C. and Kim, Nam H. and Kuila, Tapas and Lee, Joong H. (2017) Investigation of band structure and electrochemical properties of h-BN/rGO composites for asymmetric supercapacitor applications. Materials Chemistry and Physics, 190. pp. 153-165.

Saha, Sanjit and Samanta, Pranab and Murmu, Naresh C. and Kim, Nam H. and Kuila, Tapas (2017) Electrochemical functionalization and in-situ deposition of the SAA@rGO/h-BN@Ni electrode for supercapacitor applications. Journal of Industrial and Engineering Chemistry, 52. pp. 321-330.

Saha, Sanjit and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2017) Investigation of the surface plasmon polariton and electrochemical properties of covalent and non-covalent functionalized reduced graphene oxide. Physical Chemistry Chemical Physics, 19 (42). 28588-28595 .

Samanta, Pranab and Dahiya, Jai and Joseph, Johnson and Ghosh, Santaneel (2017) Interface science and engineering for less friction and wear. Advances in Mechanical Engineering, 9 (12). p. 1.

Sengupta, D. and Mondal, B. and Mukherjee, K. (2017) Genesis of flake-like morphology and dye-sensitized solar cell performance of Al-doped ZnO particles: a study. Journal of Nanoparticle Research, 19. 100 (1-13).

Sinha, M. and Mahapatra, R. and Mondal, B. and Ghosh, R. (2017) A High-Sensitivity Gas Sensor Toward Methanol Using ZnO Microrods: Effect of Operating Temperature. Journal of Electronic Materials, 46 (4). pp. 2476-2482.

T

Tallapragada, S.D. and Layek, K. and Mukherjee, R. and Mistry, K.K. and Ghosh, M. (2017) Development of screen-printed electrode based immunosensor for the detection of HER2 antigen in human serum samples. Bioelectrochemistry, 118. pp. 25-30.

V

Verma, M. and Loha, C. and Sinha, A.N. and Kumar, M. and Saikia, A. and Chatterjee, P.K. (2017) Hydrodynamic Modelling of Coal-Biomass Mixture in a Bubbling Fluidized Bed Reactor. Journal of Applied Fluid Mechanics, 10 (5). pp. 1355-1362.

Verma, Munna and Loha, Chanchal and Sinha, Amar Nath and Chatterjee, Pradip Kumar (2017) Drying of biomass for utilising in co-firing with coal and its impact on environment – A review. Renewable and Sustainable Energy Reviews, 71. pp. 732-741.

This list was generated on Thu Jun 24 12:54:02 2021 IST.