Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | G | H | J | K | L | M | N | P | R | S | T | U | Y
Number of items: 79.


Arun, Ravi K. and Bekele, Wasihun and Ghatak, Animangsu (2013) Self oscillating potential generated in patterned micro-fluidic fuel cell. Electrochimica Acta, 87. pp. 489-496. ISSN 0013-4686


Basak, Bikram and Bhunia, Biswanath and Mukherjee, Suprabhat and Dey, Apurba (2013) Optimization of physicochemical parameters for phenol biodegradation by Candida tropicalis PHB5 using Taguchi Methodology. Desalination and Water Treatment, 51 (34-36). pp. 6846-6862.

Bhattacharya, Dibyendu (2013) Synthesis, characterization, structure and dual room-temperature fluorescent and phosphorescent emission in μ-oxalato-bridged rhenium(I) metallacycle. Inorganic Chemistry Communications, 36. pp. 159-162.

Biswas, G. (2013) Variant of a volume-of-fluid method for surface tension-dominant two-phase flows. Sadhana, 38 (6). pp. 1127-1133.


Chakraborty, I. and Biswas, G. and Ghoshdastidar, P.S. (2013) A coupled level-set and volume-of-fluid method for the buoyant rise of gas bubbles in liquids. International Journal of Heat and Mass Transfer, 58. pp. 240-259. ISSN 0017-9310

Chakraborty, Suman and Chatterjee, Dipankar and Bakli, Chirodeep (2013) Nonlinear Amplification in Electrokinetic Pumping in Nanochannels in the Presence of Hydrophobic Interactions. Physical Review Letters , 110. 184503 (1-5). ISSN 0031-9007

Chatterjee, Abhijit and Das, Debashis (2013) Assessing Flow Response of Self-compacting Mortar by Taguchi Method and ANOVA Interaction. Materials Research, 16 (5). pp. 1084-1091. ISSN 1516-1439

Chatterjee, Anjali and Bhattacharjee, Partha and Roy, N.K. and Kumbhakar, P. (2013) Usage of nanotechnology based gas sensor for health assessment and maintenance of transformers by DGA method. Electrical Power and Energy Systems, 45. pp. 137-141. ISSN 0142-0615

Chatterjee, Anjali and Sarkar, Rajat and Roy, Nirmal K. and Kumbhakar, P. (2013) On Line Monitoring of Transformers using Gas Sensor Fabricated by Nanotechnology. International Transactions on Electrical Energy Systems, 23 (6). pp. 867-875.

Chatterjee, Debabrata and K, Jagadessh C. Bose and Mukhopadhyay, Sudit (2013) Binding of aquo-ethylenediaminetetraacetatoruthenium(III) to apo-transferrin. Fluorescence, antiproliferative and in silico studies. Inorganica Chimica Acta, 404. pp. 1-4.

Chatterjee, Debabrata and Paul, Barnali and Mukherjee, Rupa (2013) Oxidation of thiocyanate with H2O2 catalyzed by [Ru(III)(edta)(H2O)](-). Dalton Transactions, 42 (27). pp. 10056-10060.

Chatterjee, Debabrata and Rothbart, Sabine and Eldik, Rudi van (2013) Selective oxidation of thiourea with H2O2 catalyzed by [RuIII(edta)(H2O)]−: kinetic and mechanistic studies. Dalton Transactions, 42 (13). pp. 4725-4729.

Chatterjee, Debabrata and Rothbart, Sabine and Eldik, Rudi van (2013) Substrate versus oxidant activation in RuIII(edta) catalyzed dye degradation. RSC Advances, 3 (11). pp. 3606-3610.

Chatterjee, Dipankar (2013) Lattice kinetic simulation of buoyancy induced MHD flows. International Journal of Heat and Mass Transfer, 65. pp. 533-544.

Chatterjee, Dipankar (2013) MHD Mixed Convection in a Lid-Driven Cavity Including a Heated Source. Numerical Heat Transfer, Part A, 64. pp. 235-254. ISSN 1040-7782

Chatterjee, Dipankar and Halder, Pabitra and Mondal, Sinchan and Bhattacharjee, Supratim (2013) Magnetoconvective transport in a vertical lid-driven cavity including a heat conducting square cylinder with Joule heating. Numerical Heat Transfer, Part A, 64. pp. 1050-1071. ISSN 1040-7782

Chatterjee, Dipankar and Mondal, Bittagopal (2013) Mixed Convection Heat Transfer from Tandem Square Cylinders for Various Gap to Size Ratios. Numerical Heat Transfer, Part A, 63. pp. 101-119. ISSN 1040-7782

Chatterjee, Dipankar and Mondal, Bittagopal (2013) Unsteady mixed convection heat transfer from tandem square cylinders in cross flow at low Reynolds numbers. Heat Mass Transfer, 49. pp. 907-920.

Chatterjee, Dipankar and Mondal, Bittagopal and Halder, Pabitra (2013) Unsteady Forced Convection Heat Transfer Over a Semicircular Cylinder at Low Reynolds Numbers. Numerical Heat Transfer, Part A, 63. pp. 411-429. ISSN 1040-7782

Chatterjee, Dipankar and Raja, Mohammad (2013) Mixed Convection Heat Transfer Past In-Line Square Cylinders in a Vertical Duct. Thermal Science , 17 (2). pp. 567-580.

Chebolu, Aneissha and Laha, Bhakti and Ghosh, Monidipa and Nagahanumaiah, Nagahanumaiah (2013) Investigation on bacterial adhesion and colonisation resistance over laser-machined micro patterned surfaces. Micro & Nano Letters, 8 (6). pp. 280-283.

Choudhury, Biplab and Saha, Bidyut Baran and Chatterjee, Pradip K. and Sarkar, Jyoti Prakas (2013) An overview of developments in adsorption refrigeration systems towards a sustainable way of cooling. Applied Energy, 104. pp. 554-567. ISSN 0306-2619


Das, P. and Samanta, S.K. and Chattopadhyay, H. and Sharma, B.B. and Dutta, P. (2013) Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope. Materials Science and Technology, 29 (1). pp. 83-92.

Das, Prosenjit and Dutta, Samik and Samanta, Sudip K (2013) Evaluation of primary phase morphology of cooling slope cast Al-Si-Mg alloy samples using image texture analysis. Proceeding of Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 227 (10). pp. 1474-1483.

Dasgupta, Ranjan Kumar and Mondal, Dipak Kumar and Chakrabarti, Ajit Kumar (2013) Evolution of Microstructures During Austempering of Ductile Irons Alloyed with Manganese and Copper. Metallurgical and Materials Transactions A, 44 (3). pp. 1376-1387.

Datta, A. and Dutta, S. and Pal, S.K. and Sen, R. (2013) Progressive cutting tool wear detection from machined surface images using Voronoi tessellation method. Journal of Materials Processing Technology, 213. pp. 2339-2349. ISSN 0924-0136

Debbarma, Swarup Ranjan and Saha, Showmen (2013) Experimental study on growth of time-dependent strain in SMA reinforced PSC beams. Magazine of Concrete Research, 65 (1). pp. 1003-1009.

Dutta, S. and Kanwat, A. and Pal, S.K. and Sen, R. (2013) Correlation study of tool flank wear with machined surface texture in end milling. Measurement, 46. pp. 4249-4260. ISSN 0263-2241


Ganguly, Amit and Das, Subhabrata and Bhattacharya, Anamica and Dey, Apurba and Chatterjee, Pradip Kumar (2013) Enzymatic hydrolysis od water hyacinth biomass for the production of ethanol: Optimization of driving parameters. Indian Journal of Experimental Biology, 51. pp. 556-566. ISSN 0019-5189

Ghosh, D. and Shukla, A.K. and Mitra, S.K. (2013) Effect of ceria coating on corrosion behaviour of low alloy steel. Surface Engineering, 29 (8). pp. 584-587.

Ghosh, D. and Shukla, A.K. and Mitra, S.K. (2013) Influence of CeO2 superficial coating on the high temperature corrosion behavior of 2.25 Cr-1 Mo Steel in SO2 + O2 atmospheres. Protection of Metals and Physical Chemistry of Surfaces, 49 (6). pp. 749-752.

Ghosh, Swati and Haldar, S. and Ganguly, A. and Chatterjee, P.K. (2013) Investigations on the kinetics and thermodynamics of dilute acid hydrolysis of Parthenium hysterophorus L. substrate. Chemical Engineering Journal, 229. pp. 111-117.


Habib, Khairul and Choudhury, Biplab and Chatterjee, Pradip Kumar and Saha, Bidyut Baran (2013) Study on a solar heat driven dual-mode adsorption chiller. Energy, 63. pp. 133-141. ISSN 0360-5442

Halder, P. and De, S. and Sinhamahapatra, K.P. and Singh, N. (2013) Numerical simulation of shock–vortex interaction in Schardin’s problem. Shock Waves, 23. pp. 495-504.

Hens, Abhiram and Mondal, Kartick and Bandyopadhyay, Dipankar (2013) Self-organized pathways to nanopatterns exploiting the instabilities of ultrathin confined bilayers. Physical Review E, 87. 022405 (1-15). ISSN 1539-3755

Hossain, Sk Mazaffar and Mukherjee, Ayan and Basu, Soumen and Pal, Mrinal (2013) Effect of Ni–Co codoping on structure and electrical properties of multiferroic BiFeO3 nanoparticles. Micro & Nano Letters, 8 (7). pp. 374-377.


Jain, R.K. and Datta, S. and Majumder, S. (2013) Design and control of an IPMC artificial muscle finger for micro gripper using EMG signal. Mechatronics, 23. pp. 381-394. ISSN 0957-4158

Jain, R.K. and Majumder, S. and Dutta, A. (2013) SCARA based peg-in-hole assembly using compliant IPMC micro gripper. Robotics and Autonomous Systems, 61. pp. 297-311. ISSN 0921-8890

Jiang, Tongwu and Kuila, Tapas and Kim, Nam Hoon and Ku, Bon-Cheol and Lee, Joong Hee (2013) Enhanced mechanical properties of silanized silica nanoparticle attached graphene oxide/epoxy composites. Composites Science and Technology, 79. pp. 115-125. ISSN 0266-3538


Karmakar, M. and Mondal, O. and Roy, B. and Paul, P.K. and Pal, M. (2013) Effect of Mn Doping on Microstructure and Optical Propertiesof Nanocrystalline ZnO. NANO: Brief Reports and Reviews, 8 (6). 1350058 (1-7).

Karmakar, M.K. and Mandal, J. and Haldar, S. and Chatterjee, P.K. (2013) Investigation of fuel gas generation in a pilot scale fluidized bed autothermal gasifier using rice husk. Fuel, 111. pp. 584-591. ISSN 0016-2361

Kim, Nam Hoon and Khanra, Partha and Kuila, Tapas and Jung, Daeseung and Lee, Joong Hee (2013) Efficient reduction of graphene oxide using Tin-powder and its electrochemical performances for use as an energy storage electrode material. Journal of Materials Chemistry A, 1 (37). pp. 11320-11328.

Kuila, Tapas and Khanra, Partha and Kim, Nam Hoon and Choi, Sung Kuk and Yun, Hyung Joong and Lee, Joong Hee (2013) One-step electrochemical synthesis of 6-amino-4-hydroxy-2-napthalene-sulfonic acid functionalized graphene for green energy storage electrode materials. Nanotechnology , 24. 365706 (1-10).

Kuila, Tapas and Khanra, Partha and Kim, Nam Hoon and Lim, Jae Kyoo and Lee, Joong Hee (2013) Effects of sodium hydroxide on the yield and electrochemical performance of sulfonated poly(ether-ether-ketone) functionalized graphene. Journal of Materials Chemistry A, 1. pp. 9294-9302.

Kumar, Sumit and Ikkurti, H.P. (2013) Power Electronic Interface for Energy Management in Battery Ultracapacitor Hybrid Energy Storage System. Electric Power Components and Systems, 4. pp. 1059-1074. ISSN 1532-5008


Lee, Joong Hee and Lee, Jin-Sun and Kuila, Tapas and Kim, Nam Hoon and Jung, Daeseung (2013) Effects of hybrid carbon fillers of polymer composite bipolar plates on the performance of direct methanol fuel cells. Composites: Part B, 51. pp. 98-105. ISSN 1359-8368

Loha, Chanchal and Chattopadhyay, Himadri and Chatterjee, Pradip K. (2013) Energy generation from fluidized bed gasification of rice husk. Journal of Renewable and Sustainable Energy, 5. 043111 (1-10). ISSN 1941-7012

Loha, Chanchal and Chattopadhyay, Himadri and Chatterjee, Pradip K. (2013) Euler-Euler CFD modeling of fluidized bed: Influence of specularity coefficient on hydrodynamic behavior. Particuology, 11. pp. 673-680. ISSN 1674-2001


Maity, Joydeep and Saha, Atanu and Mondal, Dipak Kumar and Biswas, Koushik (2013) Mechanism of accelerated spheroidization of steel during cyclic heat treatment around the upper critical temperature. Philosophical Magazine Letters, 93 (4). pp. 231-237.

Maji, Palash Kumar and Roychowdhury, Amit and Datta, Debasis (2013) Minimizing Stress Shielding Effect of Femoral Stem—A Review. Journal of Medical Imaging and Health Informatics, 3. pp. 1-8. ISSN 2156-7018

Mandal, Nilrudra and Doloi, B. and Mondal, B. (2013) Predictive modeling of surface roughness in high speed machining of AISI 4340 steel using yttria stabilized zirconia toughened alumina turning insert. Int. Journal of Refractory Metals and Hard Materials, 38. pp. 40-46. ISSN 0263-4368

Mandal, Soumen and Kumar, Anirudh and Nagahanumaiah, Nagahanumaiah (2013) Assessment of micro turning machine stiffness response and material characteristics by fuzzy rule based pattern matching of cutting force plots. Journal of Manufacturing Systems, 32. pp. 228-237. ISSN 0278-6125

Mandal, Soumen and Mishra, Vinod and Tiwari, Umesh and Nagahanumaiah, Nagahanumaiah and Sarepaka, Rama Gopal (2013) Fiber Bragg Grating Sensor for Temperature Measurement in Micro Turning of Optical Surfaces with High Surface Integrity. International Journal of Optomechatronics, 7. pp. 244-252. ISSN 1559-9612

Mondal, O. and Datta, A. and Chakravorty, D. and Pal, M. (2013) Ultrafine narrow dispersed copper nanoparticles synthesized by a facile chemical reduction method. MRS Communications, 3. pp. 91-95.

Mondal, Oindrila and Pal, Mrinal (2013) Unusual and strong emission in visible region from Mn2+ and Y3+ doped ZnO nanocrystals. Optical Materials, 35. pp. 1520-1525. ISSN 0925-3467

Mondal, Oindrila and Thanh, Nguyen and Green, Luke Aw and Pal, Mrinal (2013) Improved and Unusual Magnetic Properties of ZnO Nanorings. Functional Materials Letters, 6 (4). 1350049 (1-4).

Mukherjee, A. and Banerjee, M. and Basu, S. and Nambissan, P.M.G. and Pal, M. (2013) Gadolinium substitution induced defect restructuring in multiferroic BiFeO3: case study by positron annihilation spectroscopy. Journal of Physics D: Applied Physics, 46 (49). p. 495309.

Mukherjee, Suprabhat and Basak, Bikram and Bhunia, Biswanath and Dey, Apurba and Mondal, Biswanath (2013) Potential use of polyphenol oxidases (PPO) in the bioremediation of phenolic contaminants containing industrial wastewater. Reviews in Environmental Science and Bio/Technology, 12 (1). pp. 61-73.

Murugan, T. and De, S. and Dora, C.L. and Das, D. and Kumar, P. Prem (2013) A study of the counter rotating vortex rings interacting with the primary vortex ring in shock tube generated flows. Fluid Dynamics Research, 45. 025506 (1-20).


Nandi, A.K. and Deb, K. and Datta, S. (2013) Genetic Algorithm–Based Design and Development of Particle-Reinforced Silicone Rubber for Soft Tooling Process. Materials and Manufacturing Processes, 28. pp. 753-760. ISSN 1042-6914

Nandi, Arup Kumar and Deb, Kalyanmoy and Datta, Shubhabrata and Orkas, Juhani (2013) A genetic fuzzy based modeling of effective thermal conductivity for polymer composites. Journal of Intelligent & Fuzzy Systems, 25 (2). pp. 259-270.


Pandey, Prasenjit and Chakraborty, Tanmoy and Mukherjee, Asok K. (2013) Bulk-phase thermodynamic properties and dielectric constant of ethanol: an ab initio quantum mechanical approach combined with a statistical model. Molecular Physics, 111 (20). pp. 3098-3103.

Paul, G. and Roy, S. and Sarkar, S. and Hanumaiah, Naga and Mitra, S. (2013) Investigations on influence of process variables on crater dimensions in micro-EDM of γ-titanium aluminide alloy in dry and oil dielectric media. The International Journal of Advanced Manufacturing Technology, 65 (5). pp. 1009-1017. ISSN 0268-3768

Paul, P.K. and Hussain, S.A. and Bhattacharjee, D. and Pal, M. (2013) Preparation of polystyrene–clay nanocomposite by solution intercalation technique. Bulletin of Materials Science, 36 (3). pp. 361-366.


Rajasekar, Rathanasamy and Kim, Nam Hoon and Jung, Daeseung and Kuila, Tapas and Lim, Jae Kyoo and Park, Min Jeong and Lee, Joong Hee (2013) Electrostatically assembled layer-by-layer composites containing graphene oxide for enhanced hydrogen gas barrier application. Composites Science and Technology, 89. pp. 167-174.

Roy, H. and Ray, A. and Barat, K. and Hochmuth, C. and Sivaprasad, S. and Tarafder, S. and Glatzel, U. and Ray, K.K. (2013) Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steel. Materials Science & Engineering A, 561. pp. 88-99. ISSN 0921-5093


Samanta, S.K. and Das, Prosenjit and Lohar, A.K. and Roy, H. and Kumar, S. and Chowdhury, A.K. (2013) A novel approach of manufacturing Nickel Wicks for loop heat pipes using Metal Injection Moulding (MIM). Sadhana, 38 (2). pp. 281-296.

Samanta, S.K. and Das, P. and Lohar, A.K. (2013) Study of physical characteristics of nickel wicks developed by metal injection moulding. Powder Metallurgy, 56 (3). pp. 221-230. ISSN 0032-5899

Shome, S.N. and Nandy, S. and Das, S.K. and Pal, D. (2013) An approach towards the design and development of a flexible 5dof AUV. Indian Journal of Geo-marine Sciences, 42 (5). pp. 565-572.

Shukla, A.K. and Das, P. and Dutta, S. and Ray, S. and Roy, H. (2013) Failure analysis of a head gear pulley used in coal mines. Engineering Failure Analysis, 31. pp. 48-58. ISSN 1350-6307

Singh, Jay and Khanra, Partha and Kuila, Tapas and Srivastava, Manish and Das, Ashok K. and Kim, Nam Hoon and Jung, Bong Joo and Kim, Da Yeong and Lee, Seung Hee and Lee, Dong Won and Kim, Dae-Ghon and Lee, Joong Hee (2013) Preparation of sulfonated poly(ether–ether–ketone) functionalized ternary graphene/AuNPs/chitosan nanocomposite for efficient glucose biosensor. Process Biochemistry, 48 (11). pp. 1724-1735.

Singh, Manjeet and Ghanshyam, C. and Mishra, Pramod Kumar and Chak, Rajesh (2013) Current Status of Electrostatic Spraying Technology for Efficient Crop Protection. AMA-Agricultural Mechanization in Asia Africa and Latin America, 44 (2). pp. 46-53.

Singh, S.P. and Biswas, G. (2013) Vortex induced vibrations of a square cylinder at subcritical Reynolds numbers. Journal of Fluids and Structures, 41. pp. 146-155.

Singh, Satya Prakash and Biswas, Gautam and Nithiarasu, Perumal (2013) A numerical study of vortex shedding from a circular cylinder vibrating in the in-line direction. International Journal of Numerical Methods For Heat & Fluid Flow, 23 (8). pp. 1449-1462. ISSN 0961-5539

Sinha, Anupam and Raman, K. Ashoke and Chattopadhyay, Himadri and Biswas, Gautam (2013) Effects of different orientations of winglet arrays on the performance of plate-fin heat exchangers. International Journal of Heat and Mass Transfer, 57. pp. 202-214. ISSN 0017-9310

Swati, Ghosh and Haldar, S. and Ganguly, A. and Chatterjee, P.K. (2013) Review on Parthenium hysterphorus as a potential energy source. Renewable and Sustainable Energy Reviews, 20. pp. 420-429.


Thiruvengadathan, Rajagopalan and Korampally, Venumadhav and Ghosh, Arkasubhra and Chanda, Nripen and Gangopadhyay, Keshab and Gangopadhyay, Shubhra (2013) Nanomaterial processing using self-assembly-bottom-up chemical and biological approaches. Reports on Progress in Physics, 76. 066501 (1-54). ISSN 0034-4885


Uddin, Md. Elias and Kuila, Tapas and Nayak, Ganesh Chandra and Kim, Nam Hoon and Ku, Bon-Cheol and Lee, Joong Hee (2013) Effects of various surfactants on the dispersion stability and electrical conductivity of surface modified graphene. Journal of Alloys and Compounds, 562. pp. 134-142. ISSN 0925-8388


Yan, Yinan and Kuila, Tapas and Kim, Nam Hoon Kim and Ku, Bon-Cheol and Lee, Joong Hee (2013) Effects of reduction and polystyrene sulfate functionalization on the capacitive behaviour of thermally exfoliated graphene. Journal of Materials Chemistry A, 1. pp. 5892-5901.

This list was generated on Tue Sep 26 21:11:44 2023 IST.