Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: | A | B | C | D | G | H | I | J | K | M | N | P | R | S | V | X
Number of items: 109.

Kumar, Prem Shankar and Kumaraswamidhas, Lakshmi Annamalai and Laha, Swarup Kumar (2019) Selecting effective intrinsic mode functions of empirical mode decomposition and variational mode decomposition using dynamic time warping algorithm for rolling element bearing fault diagnosis. Transactions of the Institute of Measurement and Control, 41 (7). pp. 1923-1932.

A

Adak, Nitai Chandra and Chhetri, Suman and Sabarad , Satvik and Roy , Himadri and Murmu, Naresh Chandra and Kuila, Tapas (2019) Direct observation of micro delamination in graphene oxide incorporated carbon fiber/epoxy composite via in-situ tensile test. Composites Science and Technology, 177. pp. 57-65.

Adak, Nitai Chandra and Chhetri, Suman and Murmu, Naresh Chandra and Samanta, Pranab and Kuila, Tapas and Lee, Joong Hee (2019) Experimental and numerical investigation on the mechanical characteristics of polyethylenimine functionalized graphene oxide incorporated woven carbon fibre/epoxy composites. Composites Part B: Engineering, 156. pp. 240-251.

Arun, Ravi Kumar and , Anjali and Sardar, Moumita and Singh, Preeti and Jha, Bishnu Mohan and Chandra, Nripen (2019) A spiral shaped regenerative microfluidic fuel cell with Ni‐C based porous electrodes. International Journal of Energy Research, 43 (14). pp. 8834-8840.

Arun, Ravi Kumar and Gupta, Vinay and Singh, Preeti and Biswas, Gautam and Chanda, Nripen (2019) Selection of Graphite Pencil Grades for the Design of Suitable Electrodes for Stacking Multiple Single‐Inlet Paper‐Pencil Fuel Cell. Chemistry Select, 4 (1). pp. 152-159.

B

Badak, Bikram and Jeon, Byong-Hun and Kurade, Mayur B and Saratale, Ganesh D and Bhunia, Biswanath and Chatterjee, Pradip K and Dey, Apurba (2019) Biodegradation of high concentration phenol using sugarcane bagasse immobilized Candida tropicalis PHB5 in a packed-bed column reactor. Ecotoxicology and Environmental Safety, 180. pp. 317-325.

Bajpai Tripathy, Divya and Murmu, Manilal and Banerjee, Priyabrata and Quraishi, Mumtaz Ahmad (2019) Palmitic acid based environmentally benign corrosion inhibiting formulation useful during acid cleansing process in MSF desalination plants. Desalination, 472 (114128).

Ball, Amit Kumar and Das, Raju and Roy, Shibendu Shekhar and Kisku, Dakshina Ranjan and Murmu, Naresh Chandra (2019) Experimentation modelling and optimization of electrohydrodynamic inkjet microfabrication approach: a Taguchi regression analysis. Sādhanā, 44 (7).

Banerjee, M. and Mukherjee, A. and Chakrabarty, S. and Basu, S. and Pal, M. (2019) Bismuth-Doped Nickel Ferrite Nanoparticles for Room Temperature Memory Devices. ACS Applied Polymer Materials, 2 (12). pp. 7795-7802.

Barnwal, Rajesh P and Ghosh, Nirnay and Ghosh, Soumya K and Das, Sajal K (2019) PS-Sim: A framework for scalable data simulation and incentivization in participatory sensing-based smart city applications. Pervasive and Mobile Computing, 57. pp. 64-77.

Bei, Sourav and Das, Riyanka and Hirani, Harish and Ghosh, Somnath and Banerjee, Priyabrata (2019) “Naked-eye” detection of CN− from aqueous phase and other extracellular matrices: an experimental and theoretical approach mimicking the logic gate concept. New Journal of Chemistry, 43 (46). pp. 18098-18109.

Bolar, Saikat and Shit, Subhasis and Kumar, J. Sharath and Murmu , Naresh Chandra and Ganesh, R. Sankar and Inokawa , Hiroshi and Kuila, Tapas (2019) Optimization of active surface area of flower like MoS2 using V-doping towards enhanced hydrogen evolution reaction in acidic and basic medium. Applied Catalysis B: Environmental, 254. pp. 432-442.

C

Chakraborty, Shitanshu Shekhar and Dutta, Samik (2019) Estimation of dilution in laser cladding based on energy balance approach using regression analysis. Sadhana, 44 (150). pp. 1-6.

Chandra, Dattatray and Banerjee, Priyabrata and Saha, Sourav Kr and Bhanda, Sujit and Patil, Rajendra and Sunita Salunke-Gawalia, Sunita (2019) n-alkylamino analogs of Vitamin K3: Electrochemical, DFT and anticancer activity of their oxidized and one electron reduced form. Journal of Molecular Structure, 1179. pp. 443-452.

Chaterjee, Pradip Kumar and Neogi, Shubhaneel Neogi and Saha, Shouvik and Jeon, Byong-Hun and Dey, Apurba (2019) Low pH treatment of starch industry effluent with bacteria from leaf debris for methane production. Water Environment Research, 91 (5). pp. 377-385.

Chauhan, Dheeraj Singh and Quraishi, M A and Sorour, A A and Saha, Sourav Kr and Banerjee, Priyabrata (2019) Triazole-modified chitosan: a biomacromolecule as a new environmentally benign corrosion inhibitor for carbon steel in a hydrochloric acid solution. RSC Advances, 9 (26). pp. 14990-15003.

Chhetri, Suman and Adak, Nitai Chandra and Samanta, Pranab and Murmu, Naresh Chandra and Srivastava, Suneel Kumar and kuila, Tapas (2019) Synergistic effect of Fe3O4 anchored N-doped rGO hybrid on mechanical, thermal and electromagnetic shielding properties of epoxy composites. Composites Part B: Engineering, 166. pp. 371-381.

Chhetri , Dr. Suman and Ghosh , Souvik and Samanta , Dr. Pranab and Murmu , Dr. Naresh Chandra and Kuila, Dr. Tapas (2019) Effect of Fe3O4‐Decorated N‐Doped Reduced Graphene Oxide Nanohybrid on the Anticorrosion Performance of Epoxy Composite Coating. ChemistrySelect, 4 (46). pp. 13446-13454.

Chinnathaypgal, Veeresh Nayak and Rangarasaiah, Ramesh Motagondanahalli and Desai, Vijay and Samanta, Sudip Kumar (2019) Evaluation of Wear Behaviour of Metal Injection Moulded Nickel Based Metal Matrix Composite. Silicon, 11. pp. 175-185.

D

Das, Priyanka and Mondal, Biswanath and Mukherjee, Kalisadhan (2019) Kinetic Insight on Improved Chemi-Resistive Response of Hydrothermal Synthesized Pt Loaded TiO2 Nano-rods Toward Vapor Phase Isopropanol. Frontiers in Materials, 6.

Das, Prosenjit and Bhuniya, Bikash and Samanta, Sudip Kumar and Dutta, Pradip (2019) Studies on die filling of A356 Al alloy and development of a steering knuckle component using rheo pressure die casting system. Journal of Materials Processing Technology, 271. pp. 291-311.

Dey, Debanjan and Banerjee, Priyabrata (2019) Toxic organic solvent adsorption by a hydrophobic covalent polymer. New Journal of Chemistry, 43 (9). pp. 3769-3777.

Dey, Debanjan and Murmu, Naresh Chandra and Banerjee, Priyabrata (2019) Tailor-made synthesis of an melamine-based aminal hydrophobic polymer for selective adsorption of toxic organic pollutants: an initiative towards wastewater purification. RSC Advances, 9 (13). pp. 7469-7478.

Dhir, Daanvir Karan and Rajan, Pradeep and Verma, S R (2019) Seed Drill Discharge Rate Variation Due to Varietal Differences Using an Automated Calibration Test Rig. AMA-Agricultural Mechanization in Asia Africa and Latin America, 50 (3). pp. 43-47.

Dutta, Samik and Karmakar, Abhishek and Roy, Himadri and Barat, Kaustav (2019) Automatic estimation of mechanical properties from fractographs using optimal anisotropic diffusion and Voronoi tessellation. Measurement, 134. pp. 574-585.

G

Gautam, Sujeet Kumar and Roy, Himadri and Lohar, Aditya Kumar and Samanta, Sudip Kumar and Sutradhar, Goutam (2019) Effect of processing routes on structure-property correlationship of ADC 12 Al alloy. Materials Research Express, 6 (2).

Ghorai, Pravat and Dey, Arka and Hazra, Abhijit and Dutta, Basudeb and Brandão, Paula and Ray, Partha Pratim and Banerjee, Priyabrata and Saha, Amrita (2019) Cd(II) Based Coordination Polymer Series: Fascinating Structures, Efficient Semiconductors, and Promising Nitro Aromatic Sensing. Crystal Growth & Design , 19 (11). pp. 6431-6447.

Ghosh, Abir and Paul, Suparna and Bhattacharya, Sayan and Sasikumar, Palani and Biswas, Krishna and Ghosh, Uday Chand (2019) Calcium ion incorporated hydrous iron(III) oxide: synthesis, characterization, and property exploitation towards water remediation from arsenite and fluoride. Environmental Science and Pollution Research, 26. pp. 4618-4632.

Ghosh, Pritam and Banerjee, Priyabrata (2019) A Journey towards Salivary Fluoride Level Detection by Suitable Low Cost Chemosensor: From Molecule to Product. The Chemical Record, 19 (10). pp. 2119-2129.

Ghosh, Souvik and Kumar, J.Sharath and Murmu, Naresh Chandra and Ganesh, R.Sankar and Inokawa, Hiroshi and Kuila, Tapas (2019) Development of carbon coated NiS2 as positive electrode material for high performance asymmetric supercapacitor. Composites Part B: Engineering, 277 (107373).

Ghosh , Ananta Kumar and Hazra, Abhijit and Mondal, Amita and Banerjee, Priyabrata (2019) Weak interactions: The architect behind the structural diversity of coordination polymer. Inorganica Chimica Acta, 488. pp. 86-119.

Giri, Santu K and Banerjee, Subrata and Chakraborty, Chandan (2019) An Improved Modulation Strategy for Fast Capacitor Voltage Balancing of Three-Level NPC Inverters. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 66 (10). pp. 7498-7509.

H

Han, Tao and Kundu, Sudip and Nag, Anindya and Xu, Yongzhao (2019) 3D Printed Sensors for Biomedical Applications: A Review. Sensors, 19(7) (1706).

Han, Tao and Nag, Anindya and Afsarimanesh, Nasrin and Mukhopadhyay, Subhas Chandra and Kundu, Sudip and Xu, Yongzhao (2019) Laser-Assisted Printed Flexible Sensors: A Review. Sensors, 19(6) (1462).

I

Ige, Ebenezer Olubunmi and Arun, Ravi Kumar and Singh, Preeti and Gope, Manash and Saha, Rajnarayan and Chanda, Nripen and Chakraborty, Suman (2019) Water desalination using graphene oxide-embedded paper microfluidics. Microfluidics and Nanofluidics, 23 (80). pp. 1-8.

Islam, Sk Tanbir and Samanta, Sudip Kumar and Lohar, Aditya Kumar and Bandyopadhyay, Asish (2019) Rheological study of alumina feedstock for a micro-powder injection moulding application. Materials Research Express, 6 (9).

J

Jain, Ravi Kant and Khan , Ajahar and Inamuddin, and Asiri, Abdullah M. (2019) Design and development of non‐perfluorinated ionic polymer metal composite‐based flexible link manipulator for robotics assembly. Polymer Composites, 40 (7). pp. 2582-2593.

Jaiswal, Namita and Hens, Abhiram and Chatterjee, Manosree and Mahata, Nibedita and Chanda, Nripen (2019) Ethylenediamine assisted functionalization of self-organized poly (D, L-lactide-co-glycolide) patterned surface to enhance cancer cell isolation. Journal of Colloid and Interface Science, 534. pp. 122-130.

K

Kataria, Jatinder and Mohapatra, S K and Kundu, K (2019) Biodiesel production from waste cooking oil using heterogeneous catalysts and its operational characteristics on variable compression ratio CI engine. Journal of the Energy Institute, 92 (2). pp. 275-287.

Khan, Ajahar and Alamry , Khalid A and Jain , Ravi Kant (2019) Polypyrrole nanoparticles-based soft actuator for artificial muscle applications. RSC Advances, 9. pp. 39721-39734.

Kolya, Haradhan and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2019) Bioinspired silver nanoparticles/reduced graphene oxide nanocomposites for catalytic reduction of 4-nitrophenol, organic dyes and act as energy storage electrode material. Composites Part B: Engineering, 173 (106924).

Kumar, J Sharath and Ghosh, Souvik and Murmu, Naresh Chandra and Mandal, Nilrudra and Kuila, Tapas (2019) Electrochemical Detection of H₂O₂ Using Copper Oxide-Reduced Graphene Oxide Heterostructure. Journal of Nanoscience and Nanotechnology, 19 (8). pp. 5295-5302.

Kumar, J Sharath and Murmu, Naresh Chandra and Banerjee, Amit and Ganesh, R Sankar and Inokawa, Hiroshi and Kuila, Tapas (2019) A SILAR method for the fabrication of layer-by-layer assembled Cu2O-reduced graphene oxide composite for non-enzymatic detection of hydrogen peroxide. Materials Research Express, 6(2) (025045).

Kumar, J. Sharath and Bolar, Saikat and Murmu, Naresh Chandra and Ganesh, R. Sankar and Inokawa, Hiroshi and Banerjee, Amit and kuila, Tapas (2019) Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications. Electroanalysis , 31 (11). pp. 2120-2129.

Kumar, Nitin and Sardana, H. K. and Shome, S. N. (2019) Saliency based shape extraction of objects in unconstrained underwater environment. Multimedia Tools and Applications, 78 (11). pp. 15121-15139.

Kundu, Abhishek and De, Sudipta (2019) High resolution numerical simulation of a shock-accelerated refrigerant-22 bubble. Computers & Fluids, 193 (104289).

Kundu, Rajen (2019) Borane phosphonate DNA: a versatile unnatural internucleotide linkage. New Journal of Chemistry, 43. pp. 4323-4328.

M

Mahapatra, Abhijit and Roy, Shibendu Shekhar and Pratihar, Dilip Kumar (2019) Study on feet forces' distributions, energy consumption and dynamic stability measure of hexapod robot during crab walking. Applied Mathematical Modelling, 65. pp. 717-744.

Mahato, Parikshit and Mishra, Suman K. and Murmu, Manilal and Murmu, Naresh Chandra and Hirani, Harish and Banerjee, Priyabrata (2019) A prolonged exposure of Ti-Si-B-C nanocomposite coating in 3.5 wt% NaCl solution: Electrochemical and morphological analysis. Surface and Coatings Technology, 375. pp. 477-488.

Maikap, A. and Mukherjee, K. and Mondal, B. and Mandal, N. and Meikap, A.K. (2019) A novel non-enzymatic zinc oxide thin film based electrochemical recyclable strip with device interface for quantitative detection of catechol in water. Biosensors and Bioelectronics, 128. pp. 32-36.

Maity, Ritwik and Chatterjee, Manosree and Banerjee, Anmol and Das, Amlan and Mishra, Raghwendra and Mazumder, Santasree and Chanda, Nripen (2019) Gold nanoparticle-assisted enhancement in the anti-cancer properties of theaflavin against human ovarian cancer cells. Materials Science and Engineering: C, 104 (109909).

Maji, Kuntal and Chakraborty, Shitanshu S and Pratihar, Dilip K and Nath, Ashish K (2019) Inverse analysis and multi-objective optimization of coupling mechanism based laser forming process. Sādhanā, 45 (1).

Mandal, Soumen and Kumar, Rajulapati Vinod and Nagahanumaiah, , (2019) Silver and molybdenum disulfide nanoparticles synthesized in situ in dimethylformamide as dielectric for micro-electro discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233 (5). pp. 1594-1599.

Mandal, Soumen and Pal, Aniruddha and Nagahanumaiah, , (2019) Time-varying process model for intelligent prediction of strain and temperature in micro-turning process. Proc IMechE, Part B: J Engineering Manufacture, 233 (5). pp. 1626-1634.

Manju, S. and Mukherjee, Somenath (2019) Function space formulation of the 3-noded distorted Timoshenko metric beam element. Structural Engineering and Mechanics, 69 (6). pp. 615-626.

Mazumder, Subhrojyoti and Kumar, Om Prakash and Kotnees, Dinesh Kumar and Mandal, Nilrudra (2019) Tribological Influences of CuO Into 3Y-TZP Ceramic Composite in Conformal Contac. Journal of Tribology, 141 (3).

Mazumder, Subhrojyoti and Barad, Bharat Bidhan and Show, Bijay Kumar and Mandal, Nilrudra (2019) Tribological property enhancement of 3Y-TZP ceramic by the combined effect of CaF2 and MgO phases. Ceramics International, 45 (10). pp. 13447-13455.

Mazumder, Subhrojyoti and Kumar, Avinash and Singh, Bipin Kumar and Roy, Himadri and Mandal, Nilrudra (2019) Tribological investigation of MgO/Al2O3 ceramic composite with the inclusion of nano CuO in dry abrasive wear test. Materials Research Express, 6 (8).

Mondal, Amita and Roy Chowdhury, Additi and Bhuyan, Samuzal and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2019) A simple urea-based multianalyte and multichannel chemosensor for the selective detection of F -, Hg 2+ and Cu 2+ in solution and cells and the extraction of Hg 2+ and Cu 2+ from real water sources: a logic gate mimic ensemble. Dalton Transactions, 48. pp. 4375-4386.

Mondal , Shyam Sundar and Chatterjee, Manosree and Tiwari, Ranjay K. and Behera, J.N. and Chanda, Nripen and Biswas, Sourav and Saha, Tanmoy Kumar (2019) Hexanuclear Zn(II) and Mononuclear Cu(II) Complexes containing imino phenol ligands: Exploitation of their Catalytic and Biological Perspectives. Applied Organometallic Chemistry, 33(8) (e5011).

Mukherjee, Sarbani and Giri, Santu K. and Banerjee, Subrata (2019) A Flexible Discontinuous Modulation Scheme with Hybrid Capacitor Voltage Balancing Strategy for Three-Level NPC Traction Inverter. IEEE Transactions on Industrial Electronics, 66 (5). pp. 3333-3343.

Mukherjee, Sarbani and Giri, Santu Kumar and Banerjee, Subrata (2019) An Improved Adjustable Modulation Strategy for Three-Level NPC Inverters Considering Dynamic Loading Applications. IEEE Transactions on Industry Applications, 55 (4). pp. 3915-3925.

Mukherjee, Sarbani and Giri, Santu Kumar and Kundu, Sourabh and Banerjee, Subrata (2019) A Generalized Discontinuous PWM Scheme for Three-Level NPC Traction Inverter With Minimum Switching Loss for Electric Vehicles. IEEE Transactions on Industry Applications, 55 (1). pp. 516-528.

Mukherjee , Dr. Kalisadhan and Ekuma , Prof. Chinedu E and Zhao , Yangyang and Maikap , Abhishek and Najmaei , Dr. Sina and Zaghloul, Prof. Mona E (2019) Discrimination of 1‐ and 2‐Propanol by Using the Transient Current Change of a Semiconducting ZnFe2O4 Chemiresistor. ChemPlusChem, 84 (4). pp. 387-391.

Murmu, Manilal and Saha, Sourav Kr. and Murmu, Naresh Chandra and Banerjee, Priyabrata (2019) Amine cured double Schiff base epoxy as efficient anticorrosive coating materials for protection of mild steel in 3.5% NaCl medium. Journal of Molecular Liquids, 278. pp. 521-535.

Murmu, Manilal and Saha, Sourav Kr. and Murmu, Naresh Chandra and Banerjee, Priyabrata (2019) Effect of stereochemical conformation into the corrosion inhibitive behaviour of double azomethine based Schiff bases on mild steel surface in 1 mol L−1 HCl medium: An experimental, density functional theory and molecular dynamics simulation study. Corrosion Science, 146. pp. 134-151.

N

Nayak, Bibhuti Bhusan and Chatterjee, Dipankar (2019) Assessment of Mixture and Eulerian Multiphase Models in Predicting the Thermo-Fluidic Transport Characteristics for Fly Ash-Water Slurry Flow in Straight Horizontal Pipeline. Heat Transfer Engineering, 40 (8). pp. 679-692.

Nayak C, Veeresh and MR, Ramesh and Desai, Vijay and Samanta, Sudip Kumar (2019) Sintering metal injection molding parts of tungsten-based steel using microwave and conventional heating methods. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233 (11). pp. 2138-2146.

Negi, Seema and Nambolan, Athul Arun and Kapil, Sajan and Joshi, Prathamesh Shreekant and R, Manivannan and Karunakaran, K.P. and Bhargava, Parag (2019) Review on electron beam based additive manufacturing. Rapid Prototyping Journal, 26 (3). pp. 485-498.

P

Pal, M and Chakrabortty, S and Nayak, J and Pal , P (2019) Removing toxic contaminants from groundwater by graphene oxide nanocomposite in a membrane module under response surface optimization. International Journal of Environmental Science and Technology, 16. pp. 4583-4594.

Pal, Parimal and Sardar, Moumita and Pal, Madhubonti and Chakrabortty, Sankha and Nayak, Jayato (2019) Modelling forward osmosis-nanofiltration integrated process for treatment and recirculation of leather industry wastewater. Computers & Chemical Engineering, 127. pp. 99-110.

Pant, Piyush and Chatterjee, Dipankar and Nandi , Titas and Samanta, Sudip Kumar and Lohar, Aditya Kumar and Changdar, Anirban (2019) Statistical modelling and optimization of clad characteristics in laser metal deposition of austenitic stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (283). pp. 1-10.

Pattanaik, A and Mukherjee, M and Mishra, S B (2019) Influence of curing condition on thermo-mechanical properties of fly ash reinforced epoxy composite. Composites Part B: Engineering, 176 (107301).

Paul, Gayatri and Shit, Subhasis and Hirani, Harish and Kuila, Tapas and Murmu, N C (2019) Tribological behavior of dodecylamine functionalized graphene nanosheets dispersed engine oil nanolubricants. Tribology International, 131. pp. 605-619.

Paul, Gayatri and Hirani, Harish and Kuila , Tapas and Murmu, N. C (2019) Nanolubricants dispersed with graphene and its derivatives: an assessment and review of the tribological performance. Nanoscale, 11. pp. 3458-3483.

Paul, Souvik and Mukhopadhyay, Saswata and Mandal, Soumen and Agarwal, Pankaj and Chanda, Nripen (2019) Fabrication of durable haemophobic surfaces on cast acrylic sheets using UV laser micromachining. Micro & Nano Letters, 14 (11). pp. 1175-1177.

Paul, Suparna and Samuzal Bhuyan, Samuzal and Mukhopadhyay, Subhra Kanti and Murmu, Naresh Chandra and Banerjee, Priyabrata (2019) Sensitive and Selective in Vitro Recognition of Biologically Toxic As(III) by Rhodamine Based Chemoreceptor. ACS Sustainable Chemistry and Engineering, 7 (16). pp. 13687-13697.

R

Raj, Shipra and Anantharaj, Sengeni and Kundu, Subrata and Roy, Poulomi (2019) In Situ Mn-Doping-Promoted Conversion of Co(OH)2 to Co3O4 as an Active Electrocatalyst for Oxygen Evolution Reaction. ACS Sustainable Chemistry & Engineering, 7 (10). pp. 9690-9698.

Raj, Shipra and Kar, Pradip and Roy, Poulomi (2019) Ammonia-Assisted Growth of CoSn(OH)6 Nanostructures and Their Electrochemical Performances for Supercapacitor. Journal of Nanoscience and Nanotechnology, 19 (5). pp. 2755-2761.

Raj, Shipra and Srivastava, Suneel Kumar and Kar, Pradip and Roy, Poulomi (2019) In situ growth of Co3O4 nanoflakes on reduced graphene oxide-wrapped Ni-foam as high performance asymmetric supercapacitor. Electrochimica Acta, 302. pp. 327-337.

Ray, Debajyoti and Puri, Asit Baran and Hanumaiah, Naga and Halder, Saurav (2019) Modeling of Top Burr Formation in Micro-End Milling of Zr-Based Bulk Metallic Glass. Journal of Micro and Nano-Manufacturing, 7 (4).

Roy, Lisa and Al-Afyouni, Malik H. and DeRosha, Daniel E. and Mondal, Bhaskar and DiMucci, Ida M. and Lancaster, Kyle M. and Shearer, Jason and Bill, Eckhard and Brennessel, William W. and Neese, Frank and Ye, Shengfa and Holland, Patrick L. (2019) Reduction of CO2 by a masked two-coordinate cobalt(i) complex and characterization of a proposed oxodicobalt(ii) intermediate. Chemical Science, 10. pp. 918-929.

S

Saha, Dr. Sanjit and Jang, Wooree and Murmu, Dr. Naresh C and Koo, Dr. Hyeyoung and Kuila, Dr. Tapas (2019) Optimization of Chemi‐adsorption, EDLC, and Redox Capacitance Through Electro‐precipitation Synthesis of Fe3O4/NiO@rGO/h‐BN for the Development of Hybrid Supercapacitor. ChemistrySelect, 4 (2). pp. 589-599.

Saha, Shouvik and Jeon, Byong-Hun and Khunde, Mayur B and Chatterjee, Pradip K and Chang, Soon Woong and Markkandan, Kesavan and Salama, El-Sayed and Govindwar, Sanjay P and Roh, Hyun-Seog (2019) Microbial acclimatization to lipidic-waste facilitates the efficacy of acidogenic fermentation. Chemical Engineering Journal, 358. pp. 188-196.

Saha, Shouvik and Jeon, Byong-Hun and Kurade, Mayur B. and Govindwar, Sanjay P. and Chatterjee, Pradip K. and Oh, Sang-Eun and Roh, Hyun-Seog and Lee, Sean S. (2019) Interspecies microbial nexus facilitated methanation of polysaccharidic wastes. Bioresource Technology, 289 (121638).

Samanta, P and Murmu, N C and Khonsari, M M (2019) The evolution of foil bearing technology. Tribology International, 135. pp. 305-323.

Samanta, Suprakash and Singh, Santosh and Sahoo, Rashmi R. (2019) Covalently grafting of self-assembled functionalized graphene oxide multilayer films on Si substrate for solid film lubrication. Thin Solid Films, 683. pp. 16-26.

Samanta, Suprakash and Singha, Santosh and Sahoo, Rashmi R. (2019) Effect of thermal annealing on the physico-chemical and tribological performance of hydrophobic alkylated graphene sheets. New Journal of Chemistry, 43 (6). pp. 2624-2639.

Sandhu, Inderpal Singh and Thangadurai, Murugan and Alegaonkar, Prashant S and Saroha, D R (2019) Mitigation of Blast Induced Acceleration using open cell natural rubber and Synthetic Foam. Defence Science Journal, 69 (1). pp. 53-57.

Shit, Subhasis and Jang, Wooree and Bolar, Saikat and Murmu, Naresh Chandra and Koo, Hyeyoung and kuila, Tapas (2019) Effect of the Solvent Ratio (Ethylene Glycol/Water) on the Preparation of an Iron Sulfide Electrocatalyst and Its Activity towards Overall Water Splitting. ChemElectroChem, 6 (12). pp. 3199-3208.

Shit, Subhasis and Bolar, Saikat and Murmu, Naresh Chandra and Kuila, Tapas (2019) Binder-Free Growth of Nickel-Doped Iron Sulfide on Nickel Foam via Electrochemical Deposition for Electrocatalytic Water Splitting. ACS Sustainable Chemistry and Engineering, 7 (21). pp. 18015-18026.

Shit, Subhasis and Chhetri, Suman and Bolar, Saikat and Murmu, Dr. Naresh C. and Jang, Wooree and Koo, Dr. Hyeyoung and Kuila, Dr. Tapas (2019) Hierarchical Cobalt Sulfide/Molybdenum Sulfide Heterostructure as Bifunctional Electrocatalyst towards Overall Water Splitting. ChemElectroChem, 6 (2). pp. 430-438.

Shit, Subhasis and Jang, Wooree and Bolar, Saikat and Murmu, Naresh Chandra and Koo, Hyeyoung and kuila, Tapas (2019) Effect of Ion Diffusion in Cobalt Molybdenum Bimetallic Sulfide toward Electrocatalytic Water Splitting. ACS Applied Materials and Interfaces, 11 (24). pp. 21634-21644.

Shome, Saikat Kumar and Jana, Sandip and Mukherjee, Arpita and Bhattacharjee, Partha (2019) Design of Adaptive Voltage Dither Control Framework Based on Spectral Analysis for Nonlinear Piezoelectric Actuator. Journal of Control, Automation and Electrical Systems, 30 (6). pp. 954-969.

Singh, Abha and Samanta, Siddhartha and Bage, Nirgaman and Dasgupta Ghosh, Barnali and Kar, Pradip and Roy, Poulomi (2019) Synthesis of stable aqueous colloid of functionalized silver nanorod. Functional Materials Letters, 12 (5).

Singh, Ambrish and Ansari, K. R. and Quraishi, M. A. and Kaya, Savas and Banerjee, Priyabrata (2019) The effect of an N-heterocyclic compound on corrosion inhibition of J55 steel in sweet corrosive medium. New Journal of Chemistry, 43 (16). pp. 6303-6313.

Singh, Ashish Kumar and Chugh, Bhawna and Saha, Sourav Kr and Banerjee, Priyabrata and Ebenso, Eno E and Thakur, Sanjeeve and Pani, Balaram (2019) Evaluation of anti-corrosion performance of an expired semi synthetic antibiotic cefdinir for mild steel in 1 M HCl medium: An experimental and theoretical study. Results in Physics, 14 (102383).

Singh, B K and Roy, H and Mondal, B and Roy, S S and Mandal, Nilrudra (2019) Measurement of chip morphology and multi criteria optimization of turning parameters for machining of AISI 4340 steel using Y-ZTA cutting insert. Measurement, 142. pp. 181-194.

Singh, Bipin Kumar and Samanta, Suprakash and Roy, Shibendu Shekhar and Sahoo, Rashmi R and Roy, Himadri and Mandal, Nilrudra (2019) Evaluation of mechanical and frictional properties of CuO added MgO/ZTA ceramics. Materials Research Express, 6 (12).

Singh, R K and Ruj, Biswajit and Sadhukhan, A K and Gupta, P (2019) Thermal degradation of waste plastics under non-sweeping atmosphere: Part 1: Effect of temperature, product optimization, and degradation mechanism. Journal of Environmental Management, 239. pp. 395-406.

Singh, R. K. and Mondal, S. and Ruj, Biswajit and Sadhukhan, A. K. and Gupta, P. (2019) Interaction of three categories of tyre waste during co-pyrolysis: Effect on product yield and quality. Journal of Analytical and Applied Pyrolysis, 141 (104618).

Singh, Rohit Kumar and Ruj, Biswajit and Sadhukhan, A.K and Gupta, P (2019) Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: Product yield analysis and their characterization. Journal of the Energy Institute, 92 (6). pp. 1647-1657.

Singh, Santosh and Samanta, Suprakash and Das, Alok Kumar and Sahoo, Rashmi R. (2019) Hydrophobic Reduced Graphene Oxide-Based Ni Coating for Improved Tribological Application. Journal of Materials Engineering and Performance, 28 (6). pp. 3704-3713.

Singh, Santosh Kumar and Samanta, Suprakash and Das, Alok Kumar and Sahoo, Rashmi R (2019) Electrodeposited SiC-graphene oxide composite in nickel matrix for improved tribological applications. Surface Topography: Metrology and Properties, 7 (3).

Singha, Ashish K and Pandey, Ajit K and Banerjee, Priyabrata and Saha, Sourav Kr and Chugh, Bhawna and Thakur, Sanjeeve and Pani, Balaram and Chaubey, Pramila and Singh, Gurmeet (2019) Eco-friendly disposal of expired anti-tuberculosis drug isoniazid and its role in the protection of metal. Journal of Environmental Chemical Engineering, 7 (2 ).

Singha, Nilotpal and Neogi, Samya and Pramanik, Bapan and Das, Saurav and Dasgupta, Antara and Ghosh, Ranajit and Das, Debapratim (2019) Ultrafast, Highly Sensitive, and Selective Detection of p-Xylene at Room Temperature by Peptide-Hydrogel-Based Composite Material. ACS Applied Polymer Materials, 1 (9). pp. 2267-2272.

Subhani, Amir Raza and Mondal, Dipak Kumar and Mondal, Chandan and Roy, Himadri and Maity, Joydeep (2019) Development of a High-Strength Low-Carbon Steel with Reasonable Ductility through Thermal Cycling. Journal of Materials Engineering and Performance, 28 (4). pp. 2192-2201.

V

Verma, Sneha (2019) All-circular hole microstructured fiber with high birefringence and low confinement loss. Applied Optics, 58 (14). pp. 3767-3774.

X

Xu, Yongzhao and Hu, Xiduo and Kundu, Sudip and Nag, Anindya and Afsarimanes, Nasrin and Sapra, Samta and Mukhopadhyay, Subhas Chandra and Han, Tao (2019) Silicon-Based Sensors for Biomedical Applications: A Review. Sensor, 19 (13). p. 2908.

This list was generated on Thu Jun 24 12:56:06 2021 IST.