Mukherjee , A and Shome , S K and Karmakar, P and Bhattacharjee, P (2020) Hybrid controller for precision positioning application. Sādhanā, 45 (1). pp. 1-8.

Das, Prosenjit and Dutta, Pradip (2020) Three-dimensional phase field simulation of spheroidal grain formation during semi solid processing of Al-7Si-0.3 Mg alloy. Computational Materials Science, 184 (109856).

Ghosh, Souvik and Samanta, Prakas and Murmu, Naresh Chandra and Kuila, Tapas (2020) Investigation of electrochemical charge storage in nickel-cobalt-selenide/reduced graphene oxide composite electrode and its hybrid supercapacitor device. Journal of Alloys and Compounds, 835 (155432).

Murmu, Manilal and Saha, Sourav Kr and Bhowmick, Prabhas and Hirani, Harish and Banerjee, Priyabrata (2020) Corrosion inhibition property of azomethine functionalized triazole derivatives in 1 mol L−1 HCl medium for mild steel: Experimental and theoretical exploration. Journal of Molecular Liquids , 313 (113508).

Chatterjee, Manosree and Jaiswal, Namita and Hens, Abhiram and Mahata, Nibedita and Chanda, Nripen (2020) Development of 6-Thioguanine conjugated PLGA nanoparticles through thioester bond formation: Benefits of electrospray mediated drug encapsulation and sustained release in cancer therapeutic applications. Materials Science and Engineering: C, 114 (111029).

Samanta, Siddhartha and Roy, Poulomi and Kar, Pradip (2020) Sensing of Higher Alcohols and Selective Sensing of Iso-Amyl Alcohol by Poly (o-Phenylenediamine) Nanofiber. IEEE Sensors Journal, 20 (16). pp. 8973-8980.

Mandal, Soumen and Paul, Souvik and Mukhopadhyay, Saswata and Arun, Ravi Kumar and Dutta, Debeshi and Chanda, Nripen (2020) Gold-nanoparticle-embedded microchannel array for enhanced power generation. Lab on a Chip , 20 (15). pp. 2717-2723.

Khanra, Mousumi and Nandi, Arup Kr. (2020) Optimal driving based trip planning of electric vehicles using evolutionary algorithms: A driving assistance system. Applied Soft Computing, 93 (106361).

Chakrabortty, Sankha and Nayak, Jayato and Ruj, Biswajit and Pal, Parimal and Kumar, Ramesh and Banerjee, Shirsendu and Sardar, Moumita and Chakraborty, Prasenjit (2020) Photocatalytic conversion of CO2 to methanol using membrane-integrated Green approach: A review on capture, conversion and purification. Journal of Environmental Chemical Engineering, 8 (4). p. 103935.

Shit, Subhasis and Ghosh, Souvik and Bolar, Saikat and Murmu, Naresh Chandra and Kuila, Tapas (2020) Understanding the Synergistic Effect in Oxygen Evolution Reaction Catalysis from Chemical Kinetics Point of View: An Iron Oxide/Nickel Oxide Case Study. Journal of The Electrochemical Society, 167 (11).

Ghosh, Pritam and Das, Joyee and Basak, Amit and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2020) Intracellular Fluorometric Recognition of Explosive and Mutagenic Nitroaromatics by a Luminescent Phenanthrene-Naphthalene Sulfone. ChemistrySelect, 5 (28). pp. 8722-8728.

Bhaumik, Shubrajit and Mukherjee, Manidipto and Sarkar, Parijat and Nayek, Anish and Paleu, Viorel (2020) Microstructural and Wear Properties of Annealed Medium Carbon Steel Plate (EN8) Cladded with Martensitic Stainless Steel (AISI410). Metals, 10 (958). pp. 1-16.

Mallik, Manab and Monia, Soumendu and Gupta, Mantosh and Ghosh, Arnab and Toppo, Moti Prakash and Roy , Himadri (2020) Synthesis and characterization of Cu2O nanoparticles. Journal of Alloys and Compounds, 829 (154623).

Das , Arjita and Ambastha, Shikha and Halder, Saurav and Samanta , Sudip and Nagahanumaiah, , (2020) A Novel Methodology for Spark Gap Monitoring in Micro-EDM Using Optical Fiber Bragg Grating. IEEE Transactions on Instrumentation and Measurement, 69 (7). pp. 4387-4394.

Shome, Saikat Kumar and Jana, Sandip and Bhattacharjee, Partha (2020) On learning-based approaches in power electronics engineering curriculum: A high switching inchworm motor drive case study. Computer Applications in Engineering Education , 28 (4). pp. 867-879.

Prathap, Gangan and Mukherjee , Somenath (2020) Letter to the Editor: Comments on the paper of Batagelj—on fractional approach to analysis of linked networks. Scientometrics, 124. pp. 2717-2722.

Vadali, Siva Ram Krishna and Mula, Subrahmanyam and Ray, Priyadip and Chakrabarti, Saswat (2020) Area Efficient VLSI Architectures for Weak Signal Detection in Additive Generalized Cauchy Noise. IEEE Transactions on Circuits and Systems I: Regular Papers , 67 (6). pp. 1962-1975.

Akhtar, Mohd. Afroz and Saha, Suman (2020) An Adaptive Frequency-Fixed Second-Order Generalized Integrator-Quadrature Signal Generator Using Fractional-Order Conformal Mapping Based Approach. IEEE Transactions on Power Electronics, 35 (6). pp. 5548-5552.

Samanta, Siddhartha and Roy, Poulomi and Kar, Pradip (2020) Sensing of ethanol and other alcohol contaminated ethanol by conducting functional poly(o-phenylenediamine). Materials Science and Engineering: B, 256 (114541).

Singh, R.K. and Ruj, B. and Sadhukhan, A.K. and Gupta, P. (2020) A TG-FTIR investigation on the co-pyrolysis of the waste HDPE, PP, PS and PET under high heating conditions. Journal of the Energy Institute, 93 (3). pp. 1020-1035.

Mahapatra, Abhijit and Roy, Shibendu Shekhar and Pratihar, Dilip Kumar (2020) Optimal Feet-Forces’ and Torque Distributions of Six-Legged Robot Maneuvering on Various Terrains. Robotica, 38 (6). pp. 1041-1063.

Hazra, Abhijit and Bej, Sourav and Mondal, Amita and Murmu, Naresh Chandra and Banerjee, Priyabrata (2020) Discerning Detection of Mutagenic Biopollutant TNP from Water and Soil Samples with Transition Metal-Containing Luminescence Metal–Organic Frameworks. ACS Omega , 5 (26). pp. 15949-15961.

Singh, Rohit Kumar and Ruj, Biswajit and Sadhukhan, Anup Kumar and Gupta, Parthapratim (2020) Thermal degradation of waste plastics under non-sweeping atmosphere: Part 2: Effect of process temperature on product characteristics and their future applications. Journal of Environmental Management, 261 (110112).

Sinha, Madhumita and Mahapatra, Rajat and Mondal, Manas Kumar and Krishnamurthy, Satheesh and Ghosh, Ranajit (2020) Fast response and low temperature sensing of acetone and ethanol using Al-doped ZnO microrods. Physica E: Low-dimensional Systems and Nanostructures, 118 (113868).

Samanta, Prakas and Ghosh, Souvik and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2020) Alteration in capacitive performance of Sn-decorated MnO2 with different crystal structure: An investigation towards the development of high-performance supercapacitor electrode materials. Journal of Energy Storage, 28 (101281).

Mondal, Amita and Hazra, Abhijit and Chakrabarty, Jitamanyu and Bose K, Jagadeesh C. and Banerjee, Priyabrata (2020) Tandem detection of sub-nano molar level CN and Hg2+ in aqueous medium by suitable molecular sensor: a viable solution for detection of CN and development of RGB based sensory device. ACS Omega, 5 (12). pp. 6576-6587.

Kapuria, Santosh and Kumar, Amit (2020) A wave packet enriched finite element for electroelastic wave propagation problems. International Journal of Mechanical Sciences, 170 (105081).

Ambastha, Shikha and Pant, Shweta and Umesh, Sharath and Vazhayil, Vikas and Asokan, Sundarrajan (2020) Feasibility Study on Thermography of Embedded Tumor Using Fiber Bragg Grating Thermal Sensor. IEEE Sensors Journal, 20 (5). pp. 2452-2459.

Gouda, Vijay and Singh, Dilpreet and Ramasamy, Alagirusamy and Das, Apurba and Kalyanasundaram, Dinesh (2020) Investigation of the mechanical performance of carbon/polypropylene 2D and 3D woven composites manufactured through multi-step impregnation processes. Composites Part A: Applied Science and Manufacturing, 130 (105733).

Basak, Bikram and Saha, Shouvik and Chatterjee, Pradip K. and Ganguly, Amit and Chang, Soon Woong and Jeona, Byong-Hun (2020) Pretreatment of polysaccharidic wastes with cellulolytic Aspergillus fumigatus for enhanced production of biohythane in a dual-stage process. Bioresource Technology, 299 (122592).

Singh, R.K. and Ruj, Biswajit and Sadhukhan, A.K. and Gupta, P and Tigga, V.P. (2020) Waste plastic to pyrolytic oil and its utilization in CI engine: Performance analysis and combustion characteristics. Fuel, 262 (116539).

Goudar, Santosha and Jain, Ravi Kant and Das, Debashis (2020) Physico-mechanical properties of tamarind pod shell-based composite. Polymer Composites, 41 (2). pp. 505-521.

Ghosh, Kunal and Mazumder, Subhrojyoti and Singh, Bipin Kumar and Hirani, Harish and Roy, Poulomi and Mandal, Nilrudra (2020) Tribological Property Investigation of Self-Lubricating Molybdenum-Based Zirconia Ceramic Composite Operational at Elevated Temperature. Journal of Tribology, 142 (2). pp. 1-8.

Prathap, Gangan and Mukherjee, Somenath and Leydesdorff, Loet (2020) Within-journal self-citations and the Pinski-Narin influence weights. Journal of Informetrics, 14 (1). p. 100989.

Akhtar, Mohd Afroz and Saha, Suman (2020) Analysis and comparative studies on impact of Transport Delay and Transforms on the performance of TD-PLL for single phase GCI under grid disturbances. International Journal of Electrical Power & Energy Systems, 115 (105488).

Pant, Piyush and Chatterjee, Dipankar and Samanta, Sudip Kumar and Nandi , Titas and Lohar, Aditya Kumar (2020) A bottom-up approach to experimentally investigate the deposition of austenitic stainless steel in laser direct metal deposition system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (88).

Chakraborty, Sankha and Nayak , Jayato and Pal, Parimal and Kumar , Ramesh and Banerjee, Shirsendu and Mondal, Preetam Kumar and Pal, Madhubanti and Ruj, Biswajit (2020) Catalytic conversion of CO2 to biofuel (methanol) and downstream separation in membrane-integrated photoreactor system under suitable conditions. International Journal of Hydrogen Energy, 45 (1). pp. 675-690.

Parveen, Gulista and Bashir, Sumayah and Thakur, Abhinay and Saha, Sourav Kr and Banerjee, Priyabrata and Kumar, Ashish (2020) Experimental and computational studies of imidazolium based ionic liquid 1-methyl- 3-propylimidazolium iodide on mild steel corrosion in acidic solution. Materials Research Express, 7 (1).

Ball, Amit Kumar and Das, Raju and Roy, Shibendu Shekhar and Kisku, Dakshina Ranjan and Murmu , Naresh Chandra (2020) Modeling of EHD inkjet printing performance using soft computing-based approaches. Soft Computing, 24. pp. 571-589.

Kumar, Nitin and Sardana, H. K. and Shome, S. N. and Mittal , Neerja (2020) Saliency Subtraction Inspired Automated Event Detection in Underwater Environments. Cognitive Computation, 12. pp. 115-127.

Khan, Ajahar and Jain, Ravi Kant and Alamry, Khalid A. (2020) Characterization and actuation behavior of SPS/SGO ion exchange polymer actuator based on PEDOT: PSS/SGO composite electrode. Polymer-Plastics Technology and Materials, 59 (7). pp. 687-701.

Maji, Kuntal and Chakraborty, Shitanshu S and Pratihar , Dilip K and Nath, Ashish K (2020) Inverse analysis and multi-objective optimization of coupling mechanism based laser-forming process. Sādhanā, 45 (8).

Samanta, Suprakash and Singh, Santosh and Sahoo, Rashmi R. (2020) Lubrication of dry sliding metallic contacts by chemically prepared functionalized graphitic nanoparticles. Friction, 8 (4). pp. 708-725.

Pattanayak, Satyajit and Hauchhum, Lalhmingsanga and Loha, Chanchal and Sailo, Lalsangzela (2020) Selection criteria of appropriate bamboo based biomass for thermochemical conversion process. Biomass Conversion and Biorefinery, 10. pp. 401-407.

Basha, M.M. and Basha, S.M. and Singh, B.K. and Mandal, N. and Sankar, M.R. (2020) A review on synthesis of zirconia toughened alumina (ZTA) for cutting tool applications. Materials Today: Proceedings, 26 (Part 2). pp. 534-541.

Pratap, Ayush and Kumar, Piyush and Singh, G.P and Mandal, Nilrudra and Singh, B.K. (2020) Effect of indentation load on mechanical properties and evaluation of tribological properties for zirconia toughened alumina. Materials Today: Proceedings, 26 (Part 2). pp. 2442-2446.

Satpati, Sanjoy and Saha, Sourav Kr. and Suhasaria, Aditya and Banerjee, Priyabrata and Sukul, Dipankar (2020) Adsorption and anti-corrosion characteristics of vanillin Schiff bases on mild steel in 1 M HCl: experimental and theoretical study. RSC Advances, 10. pp. 9258-9273.

Maji, Kuntal and Chakraborty, Shitanshu S and Pratihar, Dilip K and Nath, Ashish K (2019) Inverse analysis and multi-objective optimization of coupling mechanism based laser forming process. Sādhanā, 45 (1).

Bajpai Tripathy, Divya and Murmu, Manilal and Banerjee, Priyabrata and Quraishi, Mumtaz Ahmad (2019) Palmitic acid based environmentally benign corrosion inhibiting formulation useful during acid cleansing process in MSF desalination plants. Desalination, 472 (114128).

Chhetri , Dr. Suman and Ghosh , Souvik and Samanta , Dr. Pranab and Murmu , Dr. Naresh Chandra and Kuila, Dr. Tapas (2019) Effect of Fe3O4‐Decorated N‐Doped Reduced Graphene Oxide Nanohybrid on the Anticorrosion Performance of Epoxy Composite Coating. ChemistrySelect, 4 (46). pp. 13446-13454.

Shome, Saikat Kumar and Jana, Sandip and Mukherjee, Arpita and Bhattacharjee, Partha (2019) Design of Adaptive Voltage Dither Control Framework Based on Spectral Analysis for Nonlinear Piezoelectric Actuator. Journal of Control, Automation and Electrical Systems, 30 (6). pp. 954-969.

Singh, Bipin Kumar and Samanta, Suprakash and Roy, Shibendu Shekhar and Sahoo, Rashmi R and Roy, Himadri and Mandal, Nilrudra (2019) Evaluation of mechanical and frictional properties of CuO added MgO/ZTA ceramics. Materials Research Express, 6 (12).

Singh, Rohit Kumar and Ruj, Biswajit and Sadhukhan, A.K and Gupta, P (2019) Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: Product yield analysis and their characterization. Journal of the Energy Institute, 92 (6). pp. 1647-1657.

Negi, Seema and Nambolan, Athul Arun and Kapil, Sajan and Joshi, Prathamesh Shreekant and R, Manivannan and Karunakaran, K.P. and Bhargava, Parag (2019) Review on electron beam based additive manufacturing. Rapid Prototyping Journal, 26 (3). pp. 485-498.

Banerjee, M. and Mukherjee, A. and Chakrabarty, S. and Basu, S. and Pal, M. (2019) Bismuth-Doped Nickel Ferrite Nanoparticles for Room Temperature Memory Devices. ACS Applied Polymer Materials, 2 (12). pp. 7795-7802.

Ghosh, Souvik and Kumar, J.Sharath and Murmu, Naresh Chandra and Ganesh, R.Sankar and Inokawa, Hiroshi and Kuila, Tapas (2019) Development of carbon coated NiS2 as positive electrode material for high performance asymmetric supercapacitor. Composites Part B: Engineering, 277 (107373).

Ray, Debajyoti and Puri, Asit Baran and Hanumaiah, Naga and Halder, Saurav (2019) Modeling of Top Burr Formation in Micro-End Milling of Zr-Based Bulk Metallic Glass. Journal of Micro and Nano-Manufacturing, 7 (4).

Ghorai, Pravat and Dey, Arka and Hazra, Abhijit and Dutta, Basudeb and Brandão, Paula and Ray, Partha Pratim and Banerjee, Priyabrata and Saha, Amrita (2019) Cd(II) Based Coordination Polymer Series: Fascinating Structures, Efficient Semiconductors, and Promising Nitro Aromatic Sensing. Crystal Growth & Design , 19 (11). pp. 6431-6447.

Pattanaik, A and Mukherjee, M and Mishra, S B (2019) Influence of curing condition on thermo-mechanical properties of fly ash reinforced epoxy composite. Composites Part B: Engineering, 176 (107301).

Maity, Ritwik and Chatterjee, Manosree and Banerjee, Anmol and Das, Amlan and Mishra, Raghwendra and Mazumder, Santasree and Chanda, Nripen (2019) Gold nanoparticle-assisted enhancement in the anti-cancer properties of theaflavin against human ovarian cancer cells. Materials Science and Engineering: C, 104 (109909).

Kumar, J. Sharath and Bolar, Saikat and Murmu, Naresh Chandra and Ganesh, R. Sankar and Inokawa, Hiroshi and Banerjee, Amit and kuila, Tapas (2019) Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications. Electroanalysis , 31 (11). pp. 2120-2129.

Kundu, Abhishek and De, Sudipta (2019) High resolution numerical simulation of a shock-accelerated refrigerant-22 bubble. Computers & Fluids, 193 (104289).

Shit, Subhasis and Bolar, Saikat and Murmu, Naresh Chandra and Kuila, Tapas (2019) Binder-Free Growth of Nickel-Doped Iron Sulfide on Nickel Foam via Electrochemical Deposition for Electrocatalytic Water Splitting. ACS Sustainable Chemistry and Engineering, 7 (21). pp. 18015-18026.

Bolar, Saikat and Shit, Subhasis and Kumar, J. Sharath and Murmu , Naresh Chandra and Ganesh, R. Sankar and Inokawa , Hiroshi and Kuila, Tapas (2019) Optimization of active surface area of flower like MoS2 using V-doping towards enhanced hydrogen evolution reaction in acidic and basic medium. Applied Catalysis B: Environmental, 254. pp. 432-442.

Giri, Santu K and Banerjee, Subrata and Chakraborty, Chandan (2019) An Improved Modulation Strategy for Fast Capacitor Voltage Balancing of Three-Level NPC Inverters. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 66 (10). pp. 7498-7509.

Saha, Shouvik and Jeon, Byong-Hun and Kurade, Mayur B. and Govindwar, Sanjay P. and Chatterjee, Pradip K. and Oh, Sang-Eun and Roh, Hyun-Seog and Lee, Sean S. (2019) Interspecies microbial nexus facilitated methanation of polysaccharidic wastes. Bioresource Technology, 289 (121638).

Badak, Bikram and Jeon, Byong-Hun and Kurade, Mayur B and Saratale, Ganesh D and Bhunia, Biswanath and Chatterjee, Pradip K and Dey, Apurba (2019) Biodegradation of high concentration phenol using sugarcane bagasse immobilized Candida tropicalis PHB5 in a packed-bed column reactor. Ecotoxicology and Environmental Safety, 180. pp. 317-325.

Paul, Souvik and Mukhopadhyay, Saswata and Mandal, Soumen and Agarwal, Pankaj and Chanda, Nripen (2019) Fabrication of durable haemophobic surfaces on cast acrylic sheets using UV laser micromachining. Micro & Nano Letters, 14 (11). pp. 1175-1177.

Kolya, Haradhan and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2019) Bioinspired silver nanoparticles/reduced graphene oxide nanocomposites for catalytic reduction of 4-nitrophenol, organic dyes and act as energy storage electrode material. Composites Part B: Engineering, 173 (106924).

Singha, Nilotpal and Neogi, Samya and Pramanik, Bapan and Das, Saurav and Dasgupta, Antara and Ghosh, Ranajit and Das, Debapratim (2019) Ultrafast, Highly Sensitive, and Selective Detection of p-Xylene at Room Temperature by Peptide-Hydrogel-Based Composite Material. ACS Applied Polymer Materials, 1 (9). pp. 2267-2272.

Nayak C, Veeresh and MR, Ramesh and Desai, Vijay and Samanta, Sudip Kumar (2019) Sintering metal injection molding parts of tungsten-based steel using microwave and conventional heating methods. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233 (11). pp. 2138-2146.

Singh, Ashish Kumar and Chugh, Bhawna and Saha, Sourav Kr and Banerjee, Priyabrata and Ebenso, Eno E and Thakur, Sanjeeve and Pani, Balaram (2019) Evaluation of anti-corrosion performance of an expired semi synthetic antibiotic cefdinir for mild steel in 1 M HCl medium: An experimental and theoretical study. Results in Physics, 14 (102383).

Das, Prosenjit and Bhuniya, Bikash and Samanta, Sudip Kumar and Dutta, Pradip (2019) Studies on die filling of A356 Al alloy and development of a steering knuckle component using rheo pressure die casting system. Journal of Materials Processing Technology, 271. pp. 291-311.

Pal, Parimal and Sardar, Moumita and Pal, Madhubonti and Chakrabortty, Sankha and Nayak, Jayato (2019) Modelling forward osmosis-nanofiltration integrated process for treatment and recirculation of leather industry wastewater. Computers & Chemical Engineering, 127. pp. 99-110.

Samanta, Suprakash and Singh, Santosh and Sahoo, Rashmi R. (2019) Covalently grafting of self-assembled functionalized graphene oxide multilayer films on Si substrate for solid film lubrication. Thin Solid Films, 683. pp. 16-26.

Kumar, J Sharath and Ghosh, Souvik and Murmu, Naresh Chandra and Mandal, Nilrudra and Kuila, Tapas (2019) Electrochemical Detection of H₂O₂ Using Copper Oxide-Reduced Graphene Oxide Heterostructure. Journal of Nanoscience and Nanotechnology, 19 (8). pp. 5295-5302.

Singh, R. K. and Mondal, S. and Ruj, Biswajit and Sadhukhan, A. K. and Gupta, P. (2019) Interaction of three categories of tyre waste during co-pyrolysis: Effect on product yield and quality. Journal of Analytical and Applied Pyrolysis, 141 (104618).

Singh, B K and Roy, H and Mondal, B and Roy, S S and Mandal, Nilrudra (2019) Measurement of chip morphology and multi criteria optimization of turning parameters for machining of AISI 4340 steel using Y-ZTA cutting insert. Measurement, 142. pp. 181-194.

Mazumder, Subhrojyoti and Kumar, Avinash and Singh, Bipin Kumar and Roy, Himadri and Mandal, Nilrudra (2019) Tribological investigation of MgO/Al2O3 ceramic composite with the inclusion of nano CuO in dry abrasive wear test. Materials Research Express, 6 (8).

Singh, Santosh Kumar and Samanta, Suprakash and Das, Alok Kumar and Sahoo, Rashmi R (2019) Electrodeposited SiC-graphene oxide composite in nickel matrix for improved tribological applications. Surface Topography: Metrology and Properties, 7 (3).

Singh, Abha and Samanta, Siddhartha and Bage, Nirgaman and Dasgupta Ghosh, Barnali and Kar, Pradip and Roy, Poulomi (2019) Synthesis of stable aqueous colloid of functionalized silver nanorod. Functional Materials Letters, 12 (5).

Islam, Sk Tanbir and Samanta, Sudip Kumar and Lohar, Aditya Kumar and Bandyopadhyay, Asish (2019) Rheological study of alumina feedstock for a micro-powder injection moulding application. Materials Research Express, 6 (9).

Paul, Suparna and Samuzal Bhuyan, Samuzal and Mukhopadhyay, Subhra Kanti and Murmu, Naresh Chandra and Banerjee, Priyabrata (2019) Sensitive and Selective in Vitro Recognition of Biologically Toxic As(III) by Rhodamine Based Chemoreceptor. ACS Sustainable Chemistry and Engineering, 7 (16). pp. 13687-13697.

Xu, Yongzhao and Hu, Xiduo and Kundu, Sudip and Nag, Anindya and Afsarimanes, Nasrin and Sapra, Samta and Mukhopadhyay, Subhas Chandra and Han, Tao (2019) Silicon-Based Sensors for Biomedical Applications: A Review. Sensor, 19 (13). p. 2908.

Mukherjee, Sarbani and Giri, Santu Kumar and Banerjee, Subrata (2019) An Improved Adjustable Modulation Strategy for Three-Level NPC Inverters Considering Dynamic Loading Applications. IEEE Transactions on Industry Applications, 55 (4). pp. 3915-3925.

Jain, Ravi Kant and Khan , Ajahar and Inamuddin, and Asiri, Abdullah M. (2019) Design and development of non‐perfluorinated ionic polymer metal composite‐based flexible link manipulator for robotics assembly. Polymer Composites, 40 (7). pp. 2582-2593.

Ball, Amit Kumar and Das, Raju and Roy, Shibendu Shekhar and Kisku, Dakshina Ranjan and Murmu, Naresh Chandra (2019) Experimentation modelling and optimization of electrohydrodynamic inkjet microfabrication approach: a Taguchi regression analysis. Sādhanā, 44 (7).

Barnwal, Rajesh P and Ghosh, Nirnay and Ghosh, Soumya K and Das, Sajal K (2019) PS-Sim: A framework for scalable data simulation and incentivization in participatory sensing-based smart city applications. Pervasive and Mobile Computing, 57. pp. 64-77.

Samanta, P and Murmu, N C and Khonsari, M M (2019) The evolution of foil bearing technology. Tribology International, 135. pp. 305-323.

Mazumder, Subhrojyoti and Barad, Bharat Bidhan and Show, Bijay Kumar and Mandal, Nilrudra (2019) Tribological property enhancement of 3Y-TZP ceramic by the combined effect of CaF2 and MgO phases. Ceramics International, 45 (10). pp. 13447-13455.

Adak, Nitai Chandra and Chhetri, Suman and Sabarad , Satvik and Roy , Himadri and Murmu, Naresh Chandra and Kuila, Tapas (2019) Direct observation of micro delamination in graphene oxide incorporated carbon fiber/epoxy composite via in-situ tensile test. Composites Science and Technology, 177. pp. 57-65.

Pant, Piyush and Chatterjee, Dipankar and Nandi , Titas and Samanta, Sudip Kumar and Lohar, Aditya Kumar and Changdar, Anirban (2019) Statistical modelling and optimization of clad characteristics in laser metal deposition of austenitic stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (283). pp. 1-10.

Chhetri, Suman and Adak, Nitai Chandra and Samanta, Pranab and Murmu, Naresh Chandra and Srivastava, Suneel Kumar and kuila, Tapas (2019) Synergistic effect of Fe3O4 anchored N-doped rGO hybrid on mechanical, thermal and electromagnetic shielding properties of epoxy composites. Composites Part B: Engineering, 166. pp. 371-381.

Singh, R K and Ruj, Biswajit and Sadhukhan, A K and Gupta, P (2019) Thermal degradation of waste plastics under non-sweeping atmosphere: Part 1: Effect of temperature, product optimization, and degradation mechanism. Journal of Environmental Management, 239. pp. 395-406.

Singh, Santosh and Samanta, Suprakash and Das, Alok Kumar and Sahoo, Rashmi R. (2019) Hydrophobic Reduced Graphene Oxide-Based Ni Coating for Improved Tribological Application. Journal of Materials Engineering and Performance, 28 (6). pp. 3704-3713.

Kumar, Nitin and Sardana, H. K. and Shome, S. N. (2019) Saliency based shape extraction of objects in unconstrained underwater environment. Multimedia Tools and Applications, 78 (11). pp. 15121-15139.

Shit, Subhasis and Jang, Wooree and Bolar, Saikat and Murmu, Naresh Chandra and Koo, Hyeyoung and kuila, Tapas (2019) Effect of Ion Diffusion in Cobalt Molybdenum Bimetallic Sulfide toward Electrocatalytic Water Splitting. ACS Applied Materials and Interfaces, 11 (24). pp. 21634-21644.

Chauhan, Dheeraj Singh and Quraishi, M A and Sorour, A A and Saha, Sourav Kr and Banerjee, Priyabrata (2019) Triazole-modified chitosan: a biomacromolecule as a new environmentally benign corrosion inhibitor for carbon steel in a hydrochloric acid solution. RSC Advances, 9 (26). pp. 14990-15003.

Ige, Ebenezer Olubunmi and Arun, Ravi Kumar and Singh, Preeti and Gope, Manash and Saha, Rajnarayan and Chanda, Nripen and Chakraborty, Suman (2019) Water desalination using graphene oxide-embedded paper microfluidics. Microfluidics and Nanofluidics, 23 (80). pp. 1-8.

Raj, Shipra and Kar, Pradip and Roy, Poulomi (2019) Ammonia-Assisted Growth of CoSn(OH)6 Nanostructures and Their Electrochemical Performances for Supercapacitor. Journal of Nanoscience and Nanotechnology, 19 (5). pp. 2755-2761.

Chaterjee, Pradip Kumar and Neogi, Shubhaneel Neogi and Saha, Shouvik and Jeon, Byong-Hun and Dey, Apurba (2019) Low pH treatment of starch industry effluent with bacteria from leaf debris for methane production. Water Environment Research, 91 (5). pp. 377-385.

Raj, Shipra and Srivastava, Suneel Kumar and Kar, Pradip and Roy, Poulomi (2019) In situ growth of Co3O4 nanoflakes on reduced graphene oxide-wrapped Ni-foam as high performance asymmetric supercapacitor. Electrochimica Acta, 302. pp. 327-337.

Kumar, Prem Shankar and Kumaraswamidhas, Lakshmi Annamalai and Laha, Swarup Kumar (2019) Selecting effective intrinsic mode functions of empirical mode decomposition and variational mode decomposition using dynamic time warping algorithm for rolling element bearing fault diagnosis. Transactions of the Institute of Measurement and Control, 41 (7). pp. 1923-1932.

Mandal, Soumen and Kumar, Rajulapati Vinod and Nagahanumaiah, , (2019) Silver and molybdenum disulfide nanoparticles synthesized in situ in dimethylformamide as dielectric for micro-electro discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233 (5). pp. 1594-1599.

Kataria, Jatinder and Mohapatra, S K and Kundu, K (2019) Biodiesel production from waste cooking oil using heterogeneous catalysts and its operational characteristics on variable compression ratio CI engine. Journal of the Energy Institute, 92 (2). pp. 275-287.

Subhani, Amir Raza and Mondal, Dipak Kumar and Mondal, Chandan and Roy, Himadri and Maity, Joydeep (2019) Development of a High-Strength Low-Carbon Steel with Reasonable Ductility through Thermal Cycling. Journal of Materials Engineering and Performance, 28 (4). pp. 2192-2201.

Mukherjee , Dr. Kalisadhan and Ekuma , Prof. Chinedu E and Zhao , Yangyang and Maikap , Abhishek and Najmaei , Dr. Sina and Zaghloul, Prof. Mona E (2019) Discrimination of 1‐ and 2‐Propanol by Using the Transient Current Change of a Semiconducting ZnFe2O4 Chemiresistor. ChemPlusChem, 84 (4). pp. 387-391.

Singha, Ashish K and Pandey, Ajit K and Banerjee, Priyabrata and Saha, Sourav Kr and Chugh, Bhawna and Thakur, Sanjeeve and Pani, Balaram and Chaubey, Pramila and Singh, Gurmeet (2019) Eco-friendly disposal of expired anti-tuberculosis drug isoniazid and its role in the protection of metal. Journal of Environmental Chemical Engineering, 7 (2 ).

Manju, S. and Mukherjee, Somenath (2019) Function space formulation of the 3-noded distorted Timoshenko metric beam element. Structural Engineering and Mechanics, 69 (6). pp. 615-626.

Ghosh , Ananta Kumar and Hazra, Abhijit and Mondal, Amita and Banerjee, Priyabrata (2019) Weak interactions: The architect behind the structural diversity of coordination polymer. Inorganica Chimica Acta, 488. pp. 86-119.

Kundu, Rajen (2019) Borane phosphonate DNA: a versatile unnatural internucleotide linkage. New Journal of Chemistry, 43. pp. 4323-4328.

Singh, Ambrish and Ansari, K. R. and Quraishi, M. A. and Kaya, Savas and Banerjee, Priyabrata (2019) The effect of an N-heterocyclic compound on corrosion inhibition of J55 steel in sweet corrosive medium. New Journal of Chemistry, 43 (16). pp. 6303-6313.

Murmu, Manilal and Saha, Sourav Kr. and Murmu, Naresh Chandra and Banerjee, Priyabrata (2019) Amine cured double Schiff base epoxy as efficient anticorrosive coating materials for protection of mild steel in 3.5% NaCl medium. Journal of Molecular Liquids, 278. pp. 521-535.

Das, Priyanka and Mondal, Biswanath and Mukherjee, Kalisadhan (2019) Kinetic Insight on Improved Chemi-Resistive Response of Hydrothermal Synthesized Pt Loaded TiO2 Nano-rods Toward Vapor Phase Isopropanol. Frontiers in Materials, 6.

Dey, Debanjan and Murmu, Naresh Chandra and Banerjee, Priyabrata (2019) Tailor-made synthesis of an melamine-based aminal hydrophobic polymer for selective adsorption of toxic organic pollutants: an initiative towards wastewater purification. RSC Advances, 9 (13). pp. 7469-7478.

Chandra, Dattatray and Banerjee, Priyabrata and Saha, Sourav Kr and Bhanda, Sujit and Patil, Rajendra and Sunita Salunke-Gawalia, Sunita (2019) n-alkylamino analogs of Vitamin K3: Electrochemical, DFT and anticancer activity of their oxidized and one electron reduced form. Journal of Molecular Structure, 1179. pp. 443-452.

Han, Tao and Nag, Anindya and Afsarimanesh, Nasrin and Mukhopadhyay, Subhas Chandra and Kundu, Sudip and Xu, Yongzhao (2019) Laser-Assisted Printed Flexible Sensors: A Review. Sensors, 19(6) (1462).

Paul, Gayatri and Shit, Subhasis and Hirani, Harish and Kuila, Tapas and Murmu, N C (2019) Tribological behavior of dodecylamine functionalized graphene nanosheets dispersed engine oil nanolubricants. Tribology International, 131. pp. 605-619.

Mazumder, Subhrojyoti and Kumar, Om Prakash and Kotnees, Dinesh Kumar and Mandal, Nilrudra (2019) Tribological Influences of CuO Into 3Y-TZP Ceramic Composite in Conformal Contac. Journal of Tribology, 141 (3).

Saha, Shouvik and Jeon, Byong-Hun and Khunde, Mayur B and Chatterjee, Pradip K and Chang, Soon Woong and Markkandan, Kesavan and Salama, El-Sayed and Govindwar, Sanjay P and Roh, Hyun-Seog (2019) Microbial acclimatization to lipidic-waste facilitates the efficacy of acidogenic fermentation. Chemical Engineering Journal, 358. pp. 188-196.

Samanta, Suprakash and Singha, Santosh and Sahoo, Rashmi R. (2019) Effect of thermal annealing on the physico-chemical and tribological performance of hydrophobic alkylated graphene sheets. New Journal of Chemistry, 43 (6). pp. 2624-2639.

Dey, Debanjan and Banerjee, Priyabrata (2019) Toxic organic solvent adsorption by a hydrophobic covalent polymer. New Journal of Chemistry, 43 (9). pp. 3769-3777.

Dutta, Samik and Karmakar, Abhishek and Roy, Himadri and Barat, Kaustav (2019) Automatic estimation of mechanical properties from fractographs using optimal anisotropic diffusion and Voronoi tessellation. Measurement, 134. pp. 574-585.

Shit, Subhasis and Chhetri, Suman and Bolar, Saikat and Murmu, Dr. Naresh C. and Jang, Wooree and Koo, Dr. Hyeyoung and Kuila, Dr. Tapas (2019) Hierarchical Cobalt Sulfide/Molybdenum Sulfide Heterostructure as Bifunctional Electrocatalyst towards Overall Water Splitting. ChemElectroChem, 6 (2). pp. 430-438.

Saha, Dr. Sanjit and Jang, Wooree and Murmu, Dr. Naresh C and Koo, Dr. Hyeyoung and Kuila, Dr. Tapas (2019) Optimization of Chemi‐adsorption, EDLC, and Redox Capacitance Through Electro‐precipitation Synthesis of Fe3O4/NiO@rGO/h‐BN for the Development of Hybrid Supercapacitor. ChemistrySelect, 4 (2). pp. 589-599.

Jaiswal, Namita and Hens, Abhiram and Chatterjee, Manosree and Mahata, Nibedita and Chanda, Nripen (2019) Ethylenediamine assisted functionalization of self-organized poly (D, L-lactide-co-glycolide) patterned surface to enhance cancer cell isolation. Journal of Colloid and Interface Science, 534. pp. 122-130.

Sandhu, Inderpal Singh and Thangadurai, Murugan and Alegaonkar, Prashant S and Saroha, D R (2019) Mitigation of Blast Induced Acceleration using open cell natural rubber and Synthetic Foam. Defence Science Journal, 69 (1). pp. 53-57.

Arun, Ravi Kumar and Gupta, Vinay and Singh, Preeti and Biswas, Gautam and Chanda, Nripen (2019) Selection of Graphite Pencil Grades for the Design of Suitable Electrodes for Stacking Multiple Single‐Inlet Paper‐Pencil Fuel Cell. Chemistry Select, 4 (1). pp. 152-159.

Adak, Nitai Chandra and Chhetri, Suman and Murmu, Naresh Chandra and Samanta, Pranab and Kuila, Tapas and Lee, Joong Hee (2019) Experimental and numerical investigation on the mechanical characteristics of polyethylenimine functionalized graphene oxide incorporated woven carbon fibre/epoxy composites. Composites Part B: Engineering, 156. pp. 240-251.

Murmu, Manilal and Saha, Sourav Kr. and Murmu, Naresh Chandra and Banerjee, Priyabrata (2019) Effect of stereochemical conformation into the corrosion inhibitive behaviour of double azomethine based Schiff bases on mild steel surface in 1 mol L−1 HCl medium: An experimental, density functional theory and molecular dynamics simulation study. Corrosion Science, 146. pp. 134-151.

Mahapatra, Abhijit and Roy, Shibendu Shekhar and Pratihar, Dilip Kumar (2019) Study on feet forces' distributions, energy consumption and dynamic stability measure of hexapod robot during crab walking. Applied Mathematical Modelling, 65. pp. 717-744.

Verma, Sneha (2019) All-circular hole microstructured fiber with high birefringence and low confinement loss. Applied Optics, 58 (14). pp. 3767-3774.

Bei, Sourav and Das, Riyanka and Hirani, Harish and Ghosh, Somnath and Banerjee, Priyabrata (2019) “Naked-eye” detection of CN− from aqueous phase and other extracellular matrices: an experimental and theoretical approach mimicking the logic gate concept. New Journal of Chemistry, 43 (46). pp. 18098-18109.

Han, Tao and Kundu, Sudip and Nag, Anindya and Xu, Yongzhao (2019) 3D Printed Sensors for Biomedical Applications: A Review. Sensors, 19(7) (1706).

Mukherjee, Sarbani and Giri, Santu K. and Banerjee, Subrata (2019) A Flexible Discontinuous Modulation Scheme with Hybrid Capacitor Voltage Balancing Strategy for Three-Level NPC Traction Inverter. IEEE Transactions on Industrial Electronics, 66 (5). pp. 3333-3343.

Mukherjee, Sarbani and Giri, Santu Kumar and Kundu, Sourabh and Banerjee, Subrata (2019) A Generalized Discontinuous PWM Scheme for Three-Level NPC Traction Inverter With Minimum Switching Loss for Electric Vehicles. IEEE Transactions on Industry Applications, 55 (1). pp. 516-528.

Ghosh, Pritam and Banerjee, Priyabrata (2019) A Journey towards Salivary Fluoride Level Detection by Suitable Low Cost Chemosensor: From Molecule to Product. The Chemical Record, 19 (10). pp. 2119-2129.

Maikap, A. and Mukherjee, K. and Mondal, B. and Mandal, N. and Meikap, A.K. (2019) A novel non-enzymatic zinc oxide thin film based electrochemical recyclable strip with device interface for quantitative detection of catechol in water. Biosensors and Bioelectronics, 128. pp. 32-36.

Mahato, Parikshit and Mishra, Suman K. and Murmu, Manilal and Murmu, Naresh Chandra and Hirani, Harish and Banerjee, Priyabrata (2019) A prolonged exposure of Ti-Si-B-C nanocomposite coating in 3.5 wt% NaCl solution: Electrochemical and morphological analysis. Surface and Coatings Technology, 375. pp. 477-488.

Kumar, J Sharath and Murmu, Naresh Chandra and Banerjee, Amit and Ganesh, R Sankar and Inokawa, Hiroshi and Kuila, Tapas (2019) A SILAR method for the fabrication of layer-by-layer assembled Cu2O-reduced graphene oxide composite for non-enzymatic detection of hydrogen peroxide. Materials Research Express, 6(2) (025045).

Mondal, Amita and Roy Chowdhury, Additi and Bhuyan, Samuzal and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2019) A simple urea-based multianalyte and multichannel chemosensor for the selective detection of F -, Hg 2+ and Cu 2+ in solution and cells and the extraction of Hg 2+ and Cu 2+ from real water sources: a logic gate mimic ensemble. Dalton Transactions, 48. pp. 4375-4386.

Arun, Ravi Kumar and , Anjali and Sardar, Moumita and Singh, Preeti and Jha, Bishnu Mohan and Chandra, Nripen (2019) A spiral shaped regenerative microfluidic fuel cell with Ni‐C based porous electrodes. International Journal of Energy Research, 43 (14). pp. 8834-8840.

Nayak, Bibhuti Bhusan and Chatterjee, Dipankar (2019) Assessment of Mixture and Eulerian Multiphase Models in Predicting the Thermo-Fluidic Transport Characteristics for Fly Ash-Water Slurry Flow in Straight Horizontal Pipeline. Heat Transfer Engineering, 40 (8). pp. 679-692.

Shit, Subhasis and Jang, Wooree and Bolar, Saikat and Murmu, Naresh Chandra and Koo, Hyeyoung and kuila, Tapas (2019) Effect of the Solvent Ratio (Ethylene Glycol/Water) on the Preparation of an Iron Sulfide Electrocatalyst and Its Activity towards Overall Water Splitting. ChemElectroChem, 6 (12). pp. 3199-3208.

Chakraborty, Shitanshu Shekhar and Dutta, Samik (2019) Estimation of dilution in laser cladding based on energy balance approach using regression analysis. Sadhana, 44 (150). pp. 1-6.

Raj, Shipra and Anantharaj, Sengeni and Kundu, Subrata and Roy, Poulomi (2019) In Situ Mn-Doping-Promoted Conversion of Co(OH)2 to Co3O4 as an Active Electrocatalyst for Oxygen Evolution Reaction. ACS Sustainable Chemistry & Engineering, 7 (10). pp. 9690-9698.

Chinnathaypgal, Veeresh Nayak and Rangarasaiah, Ramesh Motagondanahalli and Desai, Vijay and Samanta, Sudip Kumar (2019) Evaluation of Wear Behaviour of Metal Injection Moulded Nickel Based Metal Matrix Composite. Silicon, 11. pp. 175-185.

Mondal , Shyam Sundar and Chatterjee, Manosree and Tiwari, Ranjay K. and Behera, J.N. and Chanda, Nripen and Biswas, Sourav and Saha, Tanmoy Kumar (2019) Hexanuclear Zn(II) and Mononuclear Cu(II) Complexes containing imino phenol ligands: Exploitation of their Catalytic and Biological Perspectives. Applied Organometallic Chemistry, 33(8) (e5011).

Paul, Gayatri and Hirani, Harish and Kuila , Tapas and Murmu, N. C (2019) Nanolubricants dispersed with graphene and its derivatives: an assessment and review of the tribological performance. Nanoscale, 11. pp. 3458-3483.

Khan, Ajahar and Alamry , Khalid A and Jain , Ravi Kant (2019) Polypyrrole nanoparticles-based soft actuator for artificial muscle applications. RSC Advances, 9. pp. 39721-39734.

Roy, Lisa and Al-Afyouni, Malik H. and DeRosha, Daniel E. and Mondal, Bhaskar and DiMucci, Ida M. and Lancaster, Kyle M. and Shearer, Jason and Bill, Eckhard and Brennessel, William W. and Neese, Frank and Ye, Shengfa and Holland, Patrick L. (2019) Reduction of CO2 by a masked two-coordinate cobalt(i) complex and characterization of a proposed oxodicobalt(ii) intermediate. Chemical Science, 10. pp. 918-929.

Pal, M and Chakrabortty, S and Nayak, J and Pal , P (2019) Removing toxic contaminants from groundwater by graphene oxide nanocomposite in a membrane module under response surface optimization. International Journal of Environmental Science and Technology, 16. pp. 4583-4594.

Dhir, Daanvir Karan and Rajan, Pradeep and Verma, S R (2019) Seed Drill Discharge Rate Variation Due to Varietal Differences Using an Automated Calibration Test Rig. AMA-Agricultural Mechanization in Asia Africa and Latin America, 50 (3). pp. 43-47.

Mandal, Soumen and Pal, Aniruddha and Nagahanumaiah, , (2019) Time-varying process model for intelligent prediction of strain and temperature in micro-turning process. Proc IMechE, Part B: J Engineering Manufacture, 233 (5). pp. 1626-1634.

Ghosh, Abir and Paul, Suparna and Bhattacharya, Sayan and Sasikumar, Palani and Biswas, Krishna and Ghosh, Uday Chand (2019) Calcium ion incorporated hydrous iron(III) oxide: synthesis, characterization, and property exploitation towards water remediation from arsenite and fluoride. Environmental Science and Pollution Research, 26. pp. 4618-4632.

Gautam, Sujeet Kumar and Roy, Himadri and Lohar, Aditya Kumar and Samanta, Sudip Kumar and Sutradhar, Goutam (2019) Effect of processing routes on structure-property correlationship of ADC 12 Al alloy. Materials Research Express, 6 (2).

Singh, Bipin Kumar and Ghosh, Kunal and Roy, Shibendu Shekhar and Mondal, Biswanath and Mandal, Nilrudra (2018) Correlation between Microstructure and Mechanical Properties of YSZ/Al2O3 Ceramics and Its Effect on High Speed Machining of Steel. Transactions of the Indian Ceramic Society, 77 (4). pp. 219-225.

Raj, Shipra and Kar, Pradip and Roy, Poulomi (2018) Facile synthesis of flower-like morphology Cu0.27Co2.73O4 for a high-performance supercapattery with extraordinary cycling stability. Chemical Communications, 54. pp. 12400-12403.

Ambastha, Shikha and Umesh, Sharath and Dabir, Sundaresh and Asokan, Sundarrajan (2018) Comparison of Force Required for Lumbar Puncture With Different Gauges of Spinal Needle Using Fiber Bragg Grating Force Device. IEEE Sensors Journal, 18 (19). pp. 8028-8033.

Khan, Ajahar and Inamuddin, . and Jain, Ravi Kant and Luqman, Mohammad and Asiri, Abdullah M (2018) Development of sulfonated poly(vinyl alcohol)/aluminium oxide/graphene based ionic polymer-metal composite (IPMC) actuator. Sensors and Actuators A: Physical, 280. pp. 114-124.

Giri , Santu Kr and Mukherjee , Sarbani and Kundu, Sourabh and Banerjee , Subrata and Chakraborty, Chandan (2018) An Improved PWM Scheme for Three-Level Inverter Extending Operation Into Overmodulation Region With Neutral-Point Voltage Balancing for Full Power-Factor Range. IEEE Journal of Emerging and Selected Topics in Power Electronics, 6 (3). 1527 -1539.

Samanta, P and Khonsari, M M (2018) The limiting load-carrying capacity of foil thrust bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (8). pp. 1046-1052.

Khan, Ajahar and Jain, Ravi Kant and Ghosh, Bhaskar and Inamuddin, . and Asiri, Abdullah M (2018) Novel ionic polymer–metal composite actuator based on sulfonated poly(1,4-phenylene ether-ether-sulfone) and polyvinylidene fluoride/sulfonated graphene oxide. RSC Advances, 8 (45). pp. 25423-25435.

Khan, Ajahar and Jain, Ravi Kant and Banerjee, Priyabrata and Ghosh, Bhaskar and Inamuddin, , and Asiri, Abdullah M. (2018) Development, Characterization and Electromechanical Actuation Behavior of Ionic Polymer Metal Composite Actuator based on Sulfonated Poly(1,4-phenylene ether-ether-sulfone)/Carbon Nanotubes. Scientific Reports, 8 (9909). pp. 1-16.

Chhetri, Suman and Adak, Nitai Chandra and Samanta, Pranab and Murmu, Naresh Chandra and Hui, David and Kuila, Tapas and Lee, Joong Hee (2018) Investigation of the mechanical and thermal properties of l-glutathione modified graphene/epoxy composites. Composites Part B: Engineering, 143. pp. 105-112.

Dubey, A.K and Samanta, A and Sarkar, P and Karmakar, M.K and Mukherjee, A and Loha, C and Kumar, M and Sahu, S.G and Saxena, V.K and Chatterjee, P.K (2018) Hydrodynamic characteristics in a pilot-scale cold flow model for chemical looping combustion. Advanced Powder Technology, 29 (6). pp. 1499-1506.

Singh, Bipin Kumar and Roy, Himadri and Mondal, Biswanath and Roy, Shibendu Sekhar and Mandal, Nilrudra (2018) Development and machinability evaluation of MgO doped Y-ZTA ceramic inserts for high-speed machining of steel. Machining Science and Technology- An International Journal, 22 (6). pp. 899-913.

Batabyal, Asit Kumar (2018) Hydrogeochemistry and quality of groundwater in a part of Damodar Valley, Eastern India: an integrated geochemical and statistical approach. Stochastic Environmental Research and Risk Assessment, 32 (8). pp. 2351-2368.

Kumar, Amit and Kapuria, Santosh (2018) An enriched finite element method for general wave propagation problems using local element domain harmonic enrichment functions. Archive of Applied Mechanics, 88 (9). pp. 1573-1594.

Saha, Sanjit and Kumar, J. Sharath and Murmu, Naresh Chandra and Samanta, Pranab and Kuila, Tapas (2018) Controlled electrodeposition of iron oxide/nickel oxide@Ni for the investigation of the effects of stoichiometry and particle size on energy storage and water splitting applications. Journal of Materials Chemistry A, 6. pp. 9657-9664.

Mondal, Nripen and Saha, Binod Kumar and Saha, Rana and Sanyal, Dipankar (2018) High-Thrust Aerostatic Bearing Design Through Transient Perturbation Modeling With Numerical Validation. Journal of Dynamic Systems, Measurement, and Control- Transactions of the ASME, 140 (4). pp. 1-8.

Bhattacharya, Anamica and Ganguly, Amit and Sadhukhan, Anup Kumar and Chatterjee, Pradip Kumar (2018) Investigations on the effect of driving parameters for xylitol production from water hyacinth biomass. Indian Journal of Biotechnology, 17 (2). pp. 272-283.

Raj, Shipra and Dong, Yifan and Kar, Pradip and Mai, Liqiang and Jin, Song and Roy, Poulomi (2018) Hybrid NiCo2O4‐NiCo2S4 Nanoflakes as High‐Performance Anode Materials for Lithium‐Ion Batteries. ChemistrySelect, 3 (8). pp. 2315-2320.

Maikap, A and Mukherjee, K and Mandal, N and Mondal, B and Meikap, A K (2018) Iron (III) oxide hydroxide based novel electrode for the electrochemical detection of trace level fluoride present in water. Electrochimica Acta, 264. pp. 150-156.

Das, Priyanka and Mondal, Biswanath and Mukherjee, Kalisadhan (2018) Improved efficiency of ZnO hierarchical particle based dye sensitized solar cell by incorporating thin passivation layer in photo-anode. Applied Physics A, 124. pp. 1-9.

Saha, B K and Mandal, S K (2018) Design of innovative pulse thresher. Journal of Scientific & Industrial Research, 77 (1). pp. 50-54.

Murugan, Thangadurai and Dora, Chandrala Lakshmana and De, Sudipta and Das, Debopam (2018) A comparative three-dimensional study of impulsive flow emanating from a shock tube for shock Mach number 1.6. Journal of Visualization, 21 (6). pp. 921-934.

Kumar, M Phani and De, Sudipta and Samanta, Pranab and Murmu, Naresh Chandra (2018) A comprehensive numerical model for double-layered porous air journal bearing at higher bearing numbers. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (5). pp. 592-606.

Halder, Shibashis and Ghosh, Pritam and Hazra , Ananta and Banerjee, Priyabrata and Roy , Partha (2018) A quinoline-based compound for explosive 2,4,6-trinitrophenol sensing: experimental and DFT-D3 studies. New Journal of Chemistry, 42 (11). pp. 8408-8414.

Mishra , Debasish and Basu Roy , Rohan and Dutta , Samik and Pal , Surjya K and Chakravarty, Debashish (2018) A review on sensor based monitoring and control of friction stir welding process and a roadmap to Industry 4.0. Journal of Manufacturing Processes, 36. pp. 373-397.

Saha, Sanjit and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2018) A review on the heterostructure nanomaterials for supercapacitor application. Journal of Energy Storage, 17. pp. 181-202.

Layek, Keya and Nagahanumaiah, N and Mistry, Kalyan Kumar (2018) A Study of Optimization of Various Parameters in the Fabrication of Screen-Printed Electrodes. IEEE Sensors Journal, 18 (19). pp. 7917-7923.

Shome, S.K and Mukherjee, A and Karmakar, P and Datta, U (2018) Adaptive feed-forward controller of piezoelectric actuator for micro/nano-positioning. Sādhanā, 43 (158). pp. 1-9.

Chattopadhyay, Priyabrata and Ghoshal, Sanjoy K. (2018) Adhesion Technologies of Bio-Inspired Climbing Robots: A Survey. International Journal of Robotics & Automation, 33 (6). pp. 654-661.

Shome, Saikat Kumar and Jana, Sandip and Mukherjee, Arpita and Bhattacharjee, Partha and Datta, Uma (2018) Bio Inspired Modified Internal Model Control Approach for Improved Disturbance Rejection of Piezo Micro Manipulator. Studies in Informatics and Control, 27 (3). pp. 295-306.

Pramanik, Koushik and Ghosh, Dr. Pritam and Dey, Debanjan and Malpaharia, Pijush and Chandra, Prof. Swapan K and Mukhopadhyay, Prof. Subhra Kanti and Banerjee, Dr. Priyabrata (2018) Chelator Probe with Exceptionally High Stokes Shift for Selective Detection of OAc− with Red Emission: Application as a Biosensor. ChemistrySelect, 3 (4). pp. 1151-1156.

Shit, Subhasis and Chhetri, Suman and Jang, Wooree and Murmu, Naresh C. and Koo, Hyeyoung and Samanta, Pranab and Kuila, Tapas (2018) Cobalt Sulfide/Nickel Sulfide Heterostructure Directly Grown on Nickel Foam: An Efficient and Durable Electrocatalyst for Overall Water Splitting Application. ACS Applied Materials & Interfaces, 10 (33). pp. 27712-27722.

Kundu, Sourabh and Deb Burman, Arka and Giri, Santu K. and Mukherjee, Sarbani and Banerjee, Subrata (2018) Comparative study between different optimisation techniques for finding precise switching angle for SHE-PWM of three-phase seven-level cascaded H-bridge inverter. IET Power Electronics, 11 (3). pp. 600-609.

Priyadarshni, Nivedita and Nath, Peuli and Nagahanumaiah, . and Chanda, Nripen (2018) DMSA-Functionalized Gold Nanorod on Paper for Colorimetric Detection and Estimation of Arsenic (III and V) Contamination in Groundwater. ACS Sustainable Chemistry & Engineering, 6 (5). pp. 6264-6272.

Reddy N, Srinivasa and Sen, Soumen and Har, Chandan (2018) Effect of flexural stiffness distribution of a fin on propulsion performance. Mechanism and Machine Theory, 129. pp. 218-231.

Adak, Nitai Chandra and Chhetri, Suman and Murmu, Naresh Chandra and Samanta, Pranab and Kuila, Tapas (2018) Effect of Thermally Reduced Graphene Oxide on Mechanical Properties of Woven Carbon Fiber/Epoxy Composite. Crystals, 8 (3). pp. 1-14.

Adak, Nitai Chandra and Chhetri, Suman and Kuila, Tapas and Murmu, Naresh Chandra and Samanta, Pranab and HeeLee, Joong (2018) Effects of hydrazine reduced graphene oxide on the inter-laminar fracture toughness of woven carbon fiber/epoxy composite. Composites Part B: Engineering, 149. pp. 22-30.

Sukul, Dipankar and Pal, Aparesh and Mukhopadhyay, Shipra and Saha, Sourav Kr and Banerjee, Priyabrata (2018) Electrochemical behaviour of uncoated and phosphatidylcholine coated copper in hydrochloric acid medium. Journal of Molecular Liquids, 249. pp. 930-940.

Karmakar, Rachan and Kundu, Krishnendu and Rajor, Anita (2018) Fuel properties and emission characteristics of biodiesel produced from unused algae grown in India. Petroleum Science, 15. pp. 385-395.

Ghosh, Pritam and Hazra, Abhijit and Ghosh, Meenakshi and Murmu, Naresh Chandra and Banerjee, Priyabrata (2018) Halide salts and their structural properties in presence of secondary amine based molecule: A combined experimental and theoretical analysis. Journal of Molecular Structure, 1157. pp. 444-449.

Chhetri, Suman and Adak, Nitai Chandra and Samanta, Pranab and Mallisetty, Phani Kumar and Murmu, Naresh Chandra and Kuila, Tapas (2018) Interface engineering for the improvement of mechanical and thermal properties of covalent functionalized graphene/epoxy composites. Journal of Applied Polymer Science, 135 (15). pp. 1-10.

Chhetri, Suman and Adak, Nitai Chandra and Samanta, Pranab and Mandal, Nilrudra and Kuila, Tapas and Murmu, Naresh Chandra (2018) Investigation of mechanical and thermal properties of the cetyltrimethylammonium bromide functionalized molybdenum disulfide (MoS2)/epoxy composites. Polymer Bulletin, 75 (1). pp. 327-343.

Masum, Habib and Chattopadhyay, Surajit and Ray, Ranjit and Bhaumik, Subhasis (2018) Measurement of walking speed from gait data using kurtosis and skewness based approximate and detailed coefficients. IET Science, Measurement & Technology, 12 (4). pp. 521-527.

Rathaur, Ranjana and Dhawan, Sumit H. and Ganguly, Amit and Mandal, Mrinal Kanti and Halder, Gopinath (2018) Methanogenesis of organic wastes and their blend in batch anaerobic digester: Experimental and kinetic study. Process Safety and Environmental Protection, 113. pp. 413-423.

Saha, Sanjit and Samanta, Pranab and Murmu, Naresh C. and Banerjee, Amit and Ganesh, R. Sankar and Inokawa, Hiroshi and Kuila, Tapas (2018) Modified electrochemical charge storage properties of h-BN/rGO superlattice through the transition from n to p type semiconductor by fluorine doping. Chemical Engineering Journal, 339. pp. 334-345.

Mahadani, Asim Kumar and Sanyal, Goutam and Mahadani, Pradosh and Bhattacharjee, Partha (2018) Modified evolutionary model with insertion and deletion (Indel) for phylogenetic tree construction. International Journal of Data Mining and Bioinformatics, 21 (1). pp. 43-69.

Das, Prosenjit and Sudip K, Samanta and Mondal, Biswanath and Dutta, Pradip (2018) Multiphase Model of Semisolid Slurry Generation and Isothermal Holding During Cooling Slope Rheoprocessing of A356 Al Alloy. Metallurgical and Materials Transactions B, 49 (4). pp. 1925-1944.

Paul, Suparna and Ghosh, Pritam and Bhuyan, Samuzal and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2018) Nanomolar-level selective dual channel sensing of Cu2+ and CN− from an aqueous medium by an opto-electronic chemoreceptor. Dalton Transactions, 47 (4). pp. 1082-1091.

Sukul, Dipankar and Pal, Aparesh and Saha, Sourav Kr and Satpati, Sanjoy and Adhikari, Utpal and Banerjee, Priyabrata (2018) Newly synthesized quercetin derivatives as corrosion inhibitors for mild steel in 1 M HCl: combined experimental and theoretical investigation. Physical Chemistry Chemical Physics, 20 (9). pp. 6562-6574.

Kumar, J. Sharath and Murmu, Naresh Chandra and Samanta, Pranab and Banerjee, Amit and Ganesh, R. Sankar and Inokawa, Hiroshi and Kuila, Tapas (2018) Novel synthesis of a Cu2O–graphene nanoplatelet composite through a two-step electrodeposition method for selective detection of hydrogen peroxide. New Journal of Chemistry, 42 (5). pp. 3574-3581.

Dutta, Subhajit and Loha, Chanchal and Chatterjee, Pradip Kumar and Sadhukhan, Anup Kumar and Gupta, Parthapratim (2018) Numerical investigation of gas-particle hydrodynamics in a vortex chamber fluidized bed. Advanced Powder Technology, 29 (12). pp. 3357-3367.

Chatterjee, Dipankar and Mishra, Ramgopal (2018) Numerical Investigation of Transient Magnetohydrodynamic Mixed Convection in a Ventilated Cavity Containing Two Heated Circular Cylinders. Heat Transfer Engineering , 39 (12). pp. 1052-1066.

Prasad, V K and Chatterjee, D and Singh, S P (2018) Numerical simulation of gas-bubble formation through two submerged orifices. Sādhanā, 43 (171). pp. 1-15.

Dey, S and Murugan, T and Chatterjee, D (2018) Numerical Visualization of Blast Wave Interacting with Objects. Journal of Applied Fluid Mechanics, 11 (5). pp. 1201-1206.

Samanta, P and Khonsari, M M (2018) On the thermoelastic instability of foil bearings. Tribology International, 121. pp. 10-20.

Singh, Gurpinder and Mohapatra, Saroj Kumar and Chandra, Satish and Ragit, S and Kundu, Krishnendu (2018) Optimization of biodiesel production from grape seed oil using Taguchi's orthogonal array​. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects , 40 (18). pp. 2144-2153.

Saha, Shouvik and Jeon, Byong-Hun and Kurade, Mayur B. and Jadhav, Shekhar B. and Chatterjee, Pradip K. and Chang, Soon Woong and Govindwar, Sanjay Prabhu and Kim, Sun Joon (2018) Optimization of dilute acetic acid pretreatment of mixed fruit waste for increased methane production. Journal of Cleaner Production, 190. pp. 411-421.

Gautam, Sujeet Kumar and Mandal, Nilrudra and Roy, Himadri and Lohar, Aditya Kumar and Samanta, Sudip Kumar and Sutradhar, Goutam (2018) Optimization of processing parameters of cooling slope process for semi-solid casting of ADC 12 Al alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (291). pp. 1-15.

Ghosh, D and Das, S and Roy, H and Mitra, S K (2018) Oxidation behaviour of nanostructured YSZ plasma sprayed coated Inconel alloy. Surface Engineering, 34 (1). pp. 22-29.

Chatterjee, Sourav and Sukul, Dipankar and Banerjee, Priyabrata and Adhikary, Jaydeep (2018) Phenoxazinone synthase activity of two iron(III) complexes comprising the same Schiff base ligand: Biomimetic functional model and mechanistic investigation. Inorganica Chimica Acta, 474. pp. 105-112.

Basak, Bikram and Fatima, Adiba and Jeon, Byong-Hun and Ganguly, Amit and Chatterjee, Pradip Kumar and Dey, Apurba (2018) Process kinetic studies of biohydrogen production by co-fermentation of fruit-vegetable wastes and cottage cheese whey. Energy for Sustainable Development, 47. pp. 39-52.

Karmakar, Rachan and Rajor, Anita and Kundu, Krishnendu and Kumar, Nitin (2018) Production of biodiesel from unused algal biomass in Punjab, India. Petroleum Science, 15 (1). pp. 164-175.

Dutta, Samik and Pal, Surjya K. and Sen, Ranjan (2018) Progressive tool condition monitoring of end milling from machined surface images. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (2). pp. 251-266.

Singh, Rohit Kumar and Ruj, Biswajit and Jana, Anusua and Mondal, Sourav and Jana, Banibrata and Sadhukhan, Anup Kumar and Gupta, Partha pratim (2018) Pyrolysis of three different categories of automotive tyre wastes: Product yield analysis and characterization. Journal of Analytical and Applied Pyrolysis, 135. pp. 379-389.

Chhetri, Suman and Adak, Nitai Chandra and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2018) Rheological, Mechanical, and Thermal Properties of Silane Grafted Layered Double Hydroxide/Epoxy Composites. Industrial & Engineering Chemistry Research, 57 (26). pp. 8729-8739.

Pal, Dibyendu and Chatterjee, Amitava and Rakshit, Anjan (2018) Robust-stable quadratic-optimal fuzzy-PDC controllers for systems with parametric uncertainties: A PSO based approach. Engineering Applications of Artificial Intelligence, 70. pp. 38-51.

Chattaraj, Ritwik and Bhaumik, Subhasis and Khan, Siladitya and Chatterjee, Debabrata (2018) Soft wearable ionic polymer sensors for palpatory pulse-rate extraction. Sensors and Actuators A: Physical, 270. pp. 65-71.

Adak, Nitai Chandra and Chhetri, Suman and Kim, Nam Hoon and Murmu, Naresh Chandra and Samanta, Pranab and Kuila, Tapas (2018) Static and Dynamic Mechanical Properties of Graphene Oxide-Incorporated Woven Carbon Fiber/Epoxy Composite. Journal of Materials Engineering and Performance, 27 (3). pp. 1138-1147.

Gupta, Satish Kumar and Ray, Sudipta and Chatterjee, Dipankar (2018) Steady Mixed Convection in Power-Law Fluids from a Heated Triangular Cylinder. Heat Transfer Engineering , 39 (11). pp. 957-976.

Sengupta, D and Mondal, B and Mukherjee, K (2018) Structural features and dye-sensitized solar cell performance of chemically synthesized F doped ZnO particles. Journal of Solid State Electrochemistry, 22 (1). pp. 227-235.

Roy, Dr. Lisa (2018) Theoretical Insights into the Nature of Oxidant and Mechanism in the Regioselective Syn‐dihydroxylation of an Alkene with a Rieske oxygenase inspired Iron Catalyst. ChemCatChem, 10 (17). pp. 3683-3688.

Chakraborty, Shitanshu Shekhar and Racherla, Vikranth and Nath, Ashish Kumar (2018) Thermo-mechanical finite element study on deformation mechanics during radial scan line laser forming of a bowl shaped surface out of a thin sheet. Journal of Manufacturing Processes, 31. pp. 593-604.

Mondal, Bittagopal and Lopez, Carlos F and Verma, Ankit and Mukherjee, Partha P (2018) Vortex generators for active thermal management in lithium-ion battery systems. International Journal of Heat and Mass Transfer, 124. pp. 800-815.

Kumar, Amit and Kapuria, Santosh (2018) Wave packet enriched finite element for generalized thermoelasticity theories for thermal shock wave problems. Journal of Thermal Stresses, 41 (8). pp. 1080-1099.

Chakravarty, Mayukh and Das, Anupam and Sarma, Chitralee and Roy, Dr. Poulomi (2018) α‐Fe2O3/TiO2 Hybrids with Tunable Morphologies as Efficient Photocatalysts and Positive Electrodes for Supercapacitors. ChemistrySelect, 3 (11). pp. 3284-3294.

Tallapragada, S.D. and Layek, K. and Mukherjee, R. and Mistry, K.K. and Ghosh, M. (2017) Development of screen-printed electrode based immunosensor for the detection of HER2 antigen in human serum samples. Bioelectrochemistry, 118. pp. 25-30.

Jana, Milan and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2017) Surface modification of reduced graphene oxide through successive ionic layer adsorption and reaction method for redox dominant supercapacitor electrodes. Chemical Engineering Journal, 330. pp. 914-925.

Chatterjee, M. and Hens, A. and Mahato, K. and Jaiswal, N. and Mahato, N. and Nagahanumaiah, Nagahanumaiah and Chanda , N. (2017) A novel approach to fabricate dye-encapsulated polymeric micro- and nanoparticles by thin film dewetting technique. J Colloid Interface Sci., 506. pp. 126-134.

Ghosh, Pritam and Das, Joyee and Basak, Amit and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2017) Nanomolar level detection of explosive and pollutant TNP by fluorescent aryl naphthalene sulfones: DFT study, in vitro detection and portable prototype fabrication. Sensors and Actuators B: Chemical, 251. pp. 985-992.

Kundu, Abhishek and De, Sudipta (2017) Navier–Stokes simulation of shock-heavy bubble interaction: Comparison of upwind and WENO schemes. Computers & Fluids, 157. pp. 131-145.

Kumar, N. and Mohapatra, S.K. and Ragit, S.S. and Kundu, K. and Karmakar, R. (2017) Optimization of safflower oil transesterification using the Taguchi approach. Petroleum Science, 14 (4). 798-805 |.

Chattaraj, Ritwik and Khan, Siladitya and Dasgupta, Aritra and Gare, Gautam and Chatterjee, Debabrata and Bhaumik, Subhasis (2017) An iteratively optimized resolution to hyper redundancy for dissimilarly doped compliant IPMC actuators. Mechatronics, 46. pp. 154-167.

De, Bibekananda and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2017) Carbon dot stabilized copper sulphide nanoparticles decorated graphene oxide hydrogel for high performance asymmetric supercapacitor. Carbon, 122. pp. 247-257.

Chhetri, Suman and Adak, Nitai Chandra and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2017) Functionalized reduced graphene oxide/epoxy composites with enhanced mechanical properties and thermal stability. Polymer Testing, 63. pp. 1-11.

Banerjee, A.J. and Roy, H. and Biswal, M.K. and Lohar, A.K. and Chattopadhyay, H. and Naga Hanumaiah, Naga Hanumaiah (2017) Investigation on Tensile Behaviour of Laser Welded Al–Mg–Sc–Zr In Situ TiB2 Reinforced Metal Matrix Composite. Transactions of the Indian Institute of Metals, 70 (8). pp. 2071-2077.

Chatterjee, Debabrata and Eldik, Rudi van (2017) RuIII(EDTA) mediated activation of redox signalling molecules. Coordination Chemistry Reviews , 349. pp. 129-138.

Ghosh, Bhaskar and Jain, R.K. and Majumder, S. and Roy, S.S. and Mukhopadhyay, S. (2017) Experimental performance evaluation of smart bimorph piezoelectric actuator and its application in micro robotics. Microsystem Technologies, 23 (10). pp. 4619-4635.

Dikshit, Mithilesh K. and Puri, Asit B. and Maity, Atanu (2017) Analysis of rotational speed variations on cutting force coefficients in high-speed ball end milling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (9). pp. 3529-3539.

Mondal, Bittagopal and Lopez, Carlos F. and Mukherjee, Partha (2017) Exploring the efficacy of nanofluids for lithium-ion battery thermal management. International Journal of Heat and Mass Transfer, 112. pp. 779-794.

Jain, R.K. and Majumder, S. and Ghosh, Bhaskar and Saha, Surajit (2017) Analysis of multiple robotic assemblies by cooperation of multimobile micromanipulation systems (M4S). The International Journal of Advanced Manufacturing Technology, 91 (9-12). pp. 3033-3050.

Kaur Sodhi, Amanpreet and Tripathi, Sonal and Kundu, Krishnendu (2017) Biodiesel production using waste cooking oil: a waste to energy conversion strategy. Clean Technologies and Environmental Policy, 19 (6). pp. 1799-1807. ISSN 1618-954X

Nayak, Bibhuti Bhusan and Chatterjee, Dipankar (2017) Convective heat transfer in slurry flow in a horizontal Y-shaped branch pipe. Powder Technology, 318. pp. 46-61.

Saha, Sanjit and Samanta, Pranab and Murmu, Naresh C. and Kim, Nam H. and Kuila, Tapas (2017) Electrochemical functionalization and in-situ deposition of the SAA@rGO/h-BN@Ni electrode for supercapacitor applications. Journal of Industrial and Engineering Chemistry, 52. pp. 321-330.

Roy, Pialee and Saha, Sourav Kr. and Banerjee, Priyabrata and Dey, Sukalpa and Sukul, Dipankar (2017) Experimental and theoretical investigation towards anti-corrosive property of glutamic acid and poly-γ-glutamic acid for mild steel in 1 M HCl: intramolecular synergism due to copolymerization. Research on Chemical Intermediates, 43 (8). pp. 4423-4444.

Batabyal, Asit Kumar and Gupta, Srimanta (2017) Fluoride-contaminated groundwater of Birbhum district, West Bengal, India: Interpretation of drinking and irrigation suitability and major geochemical processes using principal component analysis. Environmental Monitoring and Assessment, 189. 369 (1-24).

Saha, Ramesh P. and Choudhury, Biplab and Das, Ranadip K. and Sur, Anirban (2017) An overview of modelling techniques employed for performance simulation of low–grade heat operated adsorption cooling systems. Renewable and Sustainable Energy Reviews, 74. pp. 364-376.

Dutta, Alokdut and Saha, Sourav Kr. and Adhikari, Utpal and Banerjee, Priyabrata and Sukul, Dipankar (2017) Effect of substitution on corrosion inhibition properties of 2-(substituted phenyl) benzimidazole derivatives on mild steel in 1 M HCl solution: A combined experimental and theoretical approach. Corrosion Science , 123. pp. 256-266.

Mishra, Srimant Kumar and Roy, H. and Mondal, A.K. and Dutta, Krishna (2017) Damage Assessment of A356 Al Alloy Under Ratcheting–Creep Interaction. Metallurgical and Materials Transactions A, 48 (6). pp. 2877-2885.

Chattopadhyay, Himadri and Samanta, Sudip K. and Biswas, Gautam and Sharma, Bharat B. (2017) Direct numerical simulation of evaporation in a biporous media. Journal of Mechanical Science and Technology, 31 (6). pp. 2635-2641.

Dutta, Subhasish and Basak, Bikram and Bhunia, Biswanath and Sinha, Ankan and Dey, Apurba (2017) Approaches towards the enhanced production of Rapamycin by Streptomyces hygroscopicus MTCC 4003 through mutagenesis and optimization of process parameters by Taguchi orthogonal array methodology. World Journal of Microbiology and Biotechnology, 33 (5). 90 (1-13).

Verma, Munna and Loha, Chanchal and Sinha, Amar Nath and Chatterjee, Pradip Kumar (2017) Drying of biomass for utilising in co-firing with coal and its impact on environment – A review. Renewable and Sustainable Energy Reviews, 71. pp. 732-741.

Ghosh, Pritam and Roy, Partha and Ghosh, Ananta and Jana, Saibal and Murmu, Naresh Chandra and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2017) Explosive and pollutant TNP detection by structurally flexible SOFs: DFT-D3, TD-DFT study and in vitro recognition. Journal of Luminescence, 185. pp. 272-278.

Nayak, Bibhuti Bhusan and Chatterjee, Dipankar (2017) Numerical investigation of convective heat transfer in pipeline flow of multi-sized mono dispersed fly ash-water slurry. International Journal of Heat and Mass Transfer, 108 (Part B). pp. 1802-1818.

Sinha, M. and Mahapatra, R. and Mondal, B. and Ghosh, R. (2017) A High-Sensitivity Gas Sensor Toward Methanol Using ZnO Microrods: Effect of Operating Temperature. Journal of Electronic Materials, 46 (4). pp. 2476-2482.

Roy Chowdhury, Additi and Banerjee, Priyabrata (2017) A simple hydrazine based molecule for selective detection of Fluoride ion in DMSO. Download PDF Journal of Chemical Sciences, 129 (4). pp. 463-470.

Patel, Manoj Kumar and Praveen, Bushra and Sahoo, Hemant Kumar and Patel, Bharat and Kumar, Ashwani and Singh, Manjeet and Nayak, Manoj Kumar and Rajan, Pradeep (2017) An advance air-induced air-assisted electrostatic nozzle with enhanced performance. Computers and Electronics in Agriculture, 135. pp. 280-288.

Lijesh, K.P. and Kumar, Deepak and Hirani, Harish (2017) Effect of disc hardness on MR brake performance. Engineering Failure Analysis, 74. pp. 228-238.

Saha, Sanjit and Jana, Milan and Samanta, Pranab and Murmu, Naresh C. and Kim, Nam H. and Kuila, Tapas and Lee, Joong H. (2017) Investigation of band structure and electrochemical properties of h-BN/rGO composites for asymmetric supercapacitor applications. Materials Chemistry and Physics, 190. pp. 153-165.

Giri, Santu Kr. and Chakrabarti, Sibaprasad and Banerjee, Subrata and Chakraborty, Chandan (2017) A Carrier-Based PWM Scheme for Neutral Point Voltage Balancing in Three-Level Inverter Extending to Full Power Factor Range. IEEE Transactions on Industrial Electronics , 64 (3). pp. 1873-1883. ISSN 0278-0046

RoyChowdhury, Additi and Roy, Biswajit Gopal and Jana, Saibal and Weyhermuller, Thomas and Banerjee, Priyabrata (2017) A simple cleft shaped hydrazine-functionalized colorimetric new Schiff base chemoreceptor for selective detection of F− in organic solvent through PET signaling: Development of a chemoreceptor based sensor kit for detection of fluoride. Sensors and Actuators B: Chemical, 241. pp. 706-715.

Laha, S.K. (2017) Enhancement of fault diagnosis of rolling element bearing using maximum kurtosis fast nonlocal means denoising. Measurement, 100. pp. 157-163.

Sengupta, D. and Mondal, B. and Mukherjee, K. (2017) Genesis of flake-like morphology and dye-sensitized solar cell performance of Al-doped ZnO particles: a study. Journal of Nanoparticle Research, 19. 100 (1-13).

Meena, Vijay Kumar and Azad, Man Singh and Singh, Suman and Singh, Narinder (2017) Micro-EDM multiple parameter optimization for Cp titanium. The International Journal of Advanced Manufacturing Technology, 89 (1-4). pp. 897-904.

Nayak, Bibhuti Bhusan and Chatterjee, Dipankar and Mullick, Amar Nath (2017) Numerical prediction of flow and heat transfer characteristics of water-fly ash slurry in a 180° return pipe bend. International Journal of Thermal Sciences, 113. pp. 100-115.

Chatterjee, Abhijit and Das, Debashis and Sadhukhan, Anup Kumar and Chatterjee, Pradip Kumar (2017) Probabilistic Assessment of UPV Test Result of a Degasser Unit. Journal of Nondestructive Evaluation, 36. 18 (1-10).

Khan, Ajahar and Inamuddin, Inamuddin and Jain, Ravi Kant and Asiri, Abdullah M. (2017) Thorium (IV) phosphate‐polyaniline composite‐based hydrophilic membranes for bending actuator application. Polymer Engineering & Science, 57 (3). pp. 258-267.

Jana, Milan and Saha, Sanjit and Samanta, Pranab and Murmu, Naresh Chandra and Kim, Nam Hoon and Kuila, Tapas and Lee, Joong Hee (2017) A successive ionic layer adsorption and reaction (SILAR) method to fabricate a layer-by-layer (LbL) MnO2-reduced graphene oxide assembly for supercapacitor application. Journal of Power Sources, 340. pp. 380-392.

Halder, Shibashis and Ghosh, Pritam and Rizzoli, Corrado and Banerjee, Priyabrata and Roy, Partha (2017) Nitroaromatic explosives detection by a luminescent Cd(II) based metal organic framework. Polyhedron, 123. pp. 217-225.

Kaya, Cemal and Kaya, Savaş and Banerjee, Priyabrata (2017) A novel lattice energy calculation technique for simple inorganic crystals. Physica B: Condensed Matter, 504. pp. 127-132.

Bandyopadhyay, Parthasarathi and Kuila, Tapas and Balamurugan, Jayaraman and Nguyen, Thanh Tuan and Kim, Nam Hoon and Lee, Joong Hee (2017) Facile synthesis of novel sulfonated polyaniline functionalized graphene using m-aminobenzene sulfonic acid for asymmetric supercapacitor application. Chemical Engineering Journal, 308. pp. 1174-1184.

Barnwal, Rajesh P. and Bharti, Sujeet and Misra, Sudip and Obaidat, Mohammad S. (2017) UCGNet: wireless sensor network‐based active aquifer contamination monitoring and control system for underground coal gasification. International Journal of Communication Systems, 30 (1). e2852.

Roy Chowdhury, Additi and Ghosh, Pritam and Paul, Suparna and Bhuyan, Samuzal and K., Jagadeesh C. Bose and Mukhopadhyay, Sudit and Banerjee, Priyabrata (2017) A novel ditopic chemosensor for cadmium and fluoride and its possible application as a pH sensor. Analytical Methods, 9 (1). pp. 124-133.

Dikshit, Mithilesh and Puri, Asit B. and Maity, Atanu (2017) Analysis of cutting force coefficients in high-speed ball end milling at varying rotational speeds. Machining Science and Technology, 21 (3). pp. 416-435.

Dutta, Debeshi and Modak, Satyanarayan and Kumar, Anirudh and Roychowdhury, Joydeb and Mandal, Soumen (2017) Bayesian network aided grasp and grip efficiency estimation using a smart data glove for post-stroke diagnosis. Biocybernetics and Biomedical Engineering, 37 (1). pp. 44-58.

Dikshit, Mithilesh K. and Puri, Asit B. and Maity , Atanu (2017) Chatter and dynamic cutting force prediction in high-speed ball end milling. Machining Science and Technology , 21 (2). pp. 291-312.

Das, P. and Mondal, B. and Mukherjee, K. (2017) Chemi-resistive response of rutile titania nano-particles towards isopropanol and formaldehyde: a correlation with the volatility and chemical reactivity of vapors. Materials Research Express, 4 (1). 015503.

Ghosh, Bhaskar and Jain, Ravi K. and Majumder, S. and Roy, S.S. and Mukhopadhyay, S. (2017) Experimental characterizations of bimorph piezoelectric actuator for robotic assembly. Journal of Intelligent Material Systems and Structures, 28 (15). pp. 2095-2109.

Ghosh, Pritam and Paul, Suparna and Banerjee, Priyabrata (2017) How explosive TNP interacts with a small tritopic receptor: a combined crystallographic and thermodynamic approach. CrystEngComm, 19 (44). 6703-6710 .

Roy Chowdhury, Additi and Mondal, Amita and Roy, Biswajit Gopal and K., Jagadeesh C. Bose and Mukhopadhyay, Sudit and Banerjee, Priyabrata (2017) Hydrazine functionalized probes for chromogenic and fluorescent ratiometric sensing of pH and F−: experimental and DFT studies. Photochemical & Photobiological Sciences, 16 (11). 1654-1663 .

Verma, M. and Loha, C. and Sinha, A.N. and Kumar, M. and Saikia, A. and Chatterjee, P.K. (2017) Hydrodynamic Modelling of Coal-Biomass Mixture in a Bubbling Fluidized Bed Reactor. Journal of Applied Fluid Mechanics, 10 (5). pp. 1355-1362.

Batabyal, Asit Kumar (2017) Hydrogeochemical processes and contaminants enrichment with special emphasis on fluoride in groundwater of Birbhum district, West Bengal, India. Environmental Earth Sciences, 76. 285 (1-23).

Samanta, Pranab and Dahiya, Jai and Joseph, Johnson and Ghosh, Santaneel (2017) Interface science and engineering for less friction and wear. Advances in Mechanical Engineering, 9 (12). p. 1.

Saha, Sanjit and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2017) Investigation of the surface plasmon polariton and electrochemical properties of covalent and non-covalent functionalized reduced graphene oxide. Physical Chemistry Chemical Physics, 19 (42). 28588-28595 .

Chatterjee, Dipankar and Gupta, Satish Kumar (2017) Magnetohydrodynamic Natural Convection in a Square Enclosure with Four Circular Cylinders Positioned at Different Rectangular Locations. Heat Transfer Engineering, 38 (17). pp. 1449-1465.

Biswas, Prosanta and Mondal, Manas Kumar and Roy, Himadri and Mandal, Durbadal (2017) Microstructural evolution and hardness property of in situ Al–Mg2Si composites using one-step gravity casting method. Canadian Metallurgical Quarterly, 56 (3). pp. 340-348.

Dikshit, Mithilesh K. and Puri, Asit B. and Maity, Atanu (2017) Modelling and application of response surface optimization to optimize cutting parameters for minimizing cutting forces and surface roughness in high-speed, ball-end milling of Al2014-T6. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (12). pp. 5117-5133.

Mondal , Manas Kumar and Das, Prosenjit and Karmakar, Nilabha and Banik, Nabanita (2017) Modelling of flow behaviour in a LD vessel by an impinging gas jet. Progress in Computational Fluid Dynamics, 17 (3). pp. 159-171.

Jana, Milan and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2017) Morphology controlled synthesis of MnCO3–RGO materials and their supercapacitor applications. Journal of Materials Chemistry A, 5 (25). 12863-12872 .

Mandal, Nilrudra and Doloi, B. and Mondal, Biswanath and Singh, B.K. (2017) Multi-criteria optimization and predictive modeling of turning forces in high-speed machining of yttria based zirconia toughened alumina insert using desirability function approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (8). pp. 1396-1408.

Kundu, Abhishek and De, Sudipta (2017) Navier–Stokes simulation of slipstream evolution in steady shock reflection. Journal of Visualization, 20 (3). pp. 515-518.

Banerjee, Soma and Saha, Monjoy and Indu, Arun and Basak, Bijan and Agarwal, Sanjit and Ahmed, Rosina and Chatterjee, Sanjoy and Mahanta, Lipi B. and Chakraborty, Chandan (2017) Near-set Based Mucin Segmentation in Histopathology Images for Detecting Mucinous Carcinoma. Journal of Medical Systems, 41. 144 (1-13).

Prabhansu, Prabhansu and Rajmistry, S. and Ganguli, Sourav and Chandra, P. and Karmakar, M. Kr. and Chatterjee , P. Kr. (2017) Numerical analysis of gas-solid behavior in a cyclone separator for circulating fluidized bed system. Journal of Applied Fluid Mechanics, 10 (4). pp. 1167-1176.

Dikshit, Mithilesh K. and Puri, Asit B. and Maity, Atanu (2017) Optimization of surface roughness in ball-end milling using teaching-learning-based optimization and response surface methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (14). pp. 2596-2607.

Roy, Spandan and Nandy, Sambhunath and Kar, Indra Narayan and Ranjit, Ranjit and Shome, Sankar Nath (2017) Robust control of nonholonomic wheeled mobile robot with past information: Theory and experiment. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering , 231 (3). pp. 178-188.

Chatterjee, Dipankar and Gupta, Krishan and Kumar, Virendra and Varghese, Sachin Abraham (2017) Rotation induced flow suppression around two tandem circular cylinders at low Reynolds number. Fluid Dynamics Research, 49 (4). 045503.

Das, Priyanka and Mondal, Biswanath and Mukherjee, Kalisadhan (2017) Simultaneous Adsorption–Desorption Processes in the Conductance Transient of Anatase Titania for Sensing Ethanol: A Distinctive Feature with Kinetic Perception. Journal of Physical Chemistry C, 121 (2). pp. 1146-1152.

Ghosh, Pritam and Banerjee, Priyabrata (2017) Small molecular probe as selective tritopic sensor of Al3+, F− and TNP: Fabrication of portable prototype for onsite detection of explosive TNP. Analytica Chimica Acta, 965. pp. 111-122.

Khan, Ajahar and Jain, Ravi Kant and Banerjee, Priyabrata and Inamuddin, Inamuddin and Asiri, Abdullah M. (2017) Soft actuator based on Kraton with GO/Ag/Pani composite electrodes for robotic applications. Materials Research Express, 4 (11). p. 115701.

K.P., Lijesh and Kumar, Deepak and Hirani, Harish (2017) Synthesis and field dependent shear stress evaluation of stable MR fluid for brake application. Industrial Lubrication and Tribology, 69 (5). pp. 655-665.

Chatterjee, S. and Banerjee, P. and Sukul, D. and Chattopadhyay, T. (2017) Al2O3 supported-Fe-III Schiff base complexes : Syntheses, characterizations and their applications in various oxidation reactions. Journal of the Indian Chemical Society, 94 (5). pp. 489-495.

Ambastha, Shikha and Umesh, Sharath and Maheshwari K., Uma and Asokan, Sundarrajan (2016) Pulmonary Function Test Using Fiber Bragg Grating Spirometer. Journal of Lightwave Technology, 34 (24). pp. 5682-5688.

Patila, Rishikesh and Bhand, Sujit and Konkimalla, V. Badireenath and Banerjee, Priyabrata and Ugale, Bharat and Chadar, Dattatray and Saha, Sourav Kr. and Praharaj, Prakash Priyadarshi and Nagaraja, C.M. (2016) Molecular association of 2-(n-alkylamino)-1,4-naphthoquinone derivatives: Electrochemical, DFT studies and antiproliferative activity against leukemia cell lines. Journal of Molecular Structure, 1125. pp. 272-281.

Park, Woong Bi and Bandyopadhyay, Parthasarathi and Nguyen, Thanh Tuan and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2016) Effect of high molecular weight polyethyleneimine functionalized graphene oxide coated polyethylene terephthalate film on the hydrogen gas barrier properties. Composites Part B: Engineering, 106. pp. 316-323.

Saha, Sourav Kr. and Murmu, Manilal and Murmu, Naresh Chandra and Banerjee, Priyabrata (2016) Evaluating electronic structure of quinazolinone and pyrimidinone molecules for its corrosion inhibition effectiveness on target specific mild steel in the acidic medium: A combined DFT and MD simulation study. Journal of Molecular Liquids, 224 (A). pp. 629-638.

Das, Prosenjit and Dutta, Pradip (2016) Phase field modelling of microstructure evolution and ripening driven grain growth during cooling slope processing of A356 Al alloy. Computational Materials Science, 125. pp. 8-19.

Barnwal, Rajesh P. and Ghosh, Soumya K. (2016) KITE: an efficient scheme for trust estimation and detection of errant nodes in vehicular cyber-physical systems. Security and Communication Network, 9 (16). pp. 3271-3281.

Saha, Shouvik and Kurade, Mayur B. and El-Dalatony, Marwa M. and Chatterjee, Pradip K. and Lee, Dae Sung and Jeon, Byong-Hun (2016) Improving bioavailability of fruit wastes using organic acid: An exploratory study of biomass pretreatment for fermentation. Energy Conversion and Management, 127. pp. 256-264.

Chattaraj, Ritwik and Khan, Siladitya and Bhattacharya, Srijan and Bepari, Bikash and Chatterjee, Debabrata and Bhaumik, Subhasis (2016) Development of two jaw compliant gripper based on hyper-redundant approximation of IPMC actuators. Sensors and Actuators A: Physical, 251. pp. 207-218.

Chhetri, Suman , , and Samanta, Pranab and Murmu, Naresh Chandra and Srivastava, Suneel Kumar and Kuila, Tapas (2016) Effect of Dodecyal Amine Functionalized Graphene on the Mechanical and Thermal Properties of Epoxy-Based Composites. Polymer Engineering and Science, 56 (11). pp. 1221-1228.

Mondal, B. and Mondal, S. and Mondal, A. and Mandal, N. (2016) Fish scale derived hydroxyapatite scaffold for bone tissue engineering. Materials Characterization, 121. pp. 112-124.

Neogi, Shubhaneel and Dey, Apurba and Chaterjee, Pradip Kumar (2016) Microflora from leaf debris is suitable for treatment of starch industry wastewater. Engineering in Life Sciences, 16 (8). pp. 683-689.

Kundu, Abhishek and De, Sudipta and Thangadurai, Murugan and Dora, C.L. and Das, Debopam (2016) Numerical visualization of shock tube-generated vortex–wall interaction using a fifth-order upwind scheme. Journal of Visualization, 19 (4). pp. 667-678.

Ghosh, Pritam and Banerjee, Priyabrata (2016) Chromogenic and fluorogenic Schiff base chemosensor for nano scale level fluoride detection with logical interpretation. Chemical Physics, 478. pp. 103-109.

Goswami, M. and Mukherjee, A. and Ghosh, R. and Basu, S. and Meikap, A.K. (2016) Enhanced magnetoconductivity and electrical property of MWCNT-CdS nanocomposite embedded in polyaniline. Solid State Sciences, 60. pp. 37-44.

Sinha, Anupam and Chattopadhyay, Himadri and Iyengar, Ashwin Kannan and Biswas, Gautam (2016) Enhancement of heat transfer in a fin-tube heat exchanger using rectangular winglet type vortex generators. International Journal of Heat and Mass Transfer, 101. pp. 667-681.

Khan, Ajahar and Inamuddin, Inamuddin and Jain, Ravi Kant (2016) Easy, operable ionic polymer metal composite actuator based on a platinum-coated sulfonated poly(vinyl alcohol)–polyaniline composite membrane. Journal of Applied Polymer Science, 133 (33). 43787(1--8).

Sah, Ramesh P. and Choudhury, Biplab and Das, Ranadip K. (2016) A review on low grade heat powered adsorption cooling systems for ice production. Renewable and Sustainable Energy Reviews, 62. pp. 109-120.

Murugan, T. and Deyashi, Monami and Dey, Santanu and Rana, Subhas Chandra and Chatterjee, P.K. (2016) Recent Developments on Synthetic Jets. Defence Science Journal, 66 (5). pp. 489-498.

Chattaraj, Ritwik and Khan, Siladitya and Bhattacharya, Srijan and Bepari, Bikash and Chatterjee, Debabrata and Bhaumik, Subhasis (2016) Shape estimation of IPMC actuators in ionic solutions using hyper redundant kinematic modeling. Mechanism and Machine Theory, 103. pp. 174-188.

Divya, Shalini and Pongilat, Remith and Kuila, Tapas and Nallathamby, Kalaiselvi and Srivastava, Suneel Kumar and Roy, Poulomi (2016) Spinel-Structured NiCo2O4 Nanorods as Energy Efficient Electrode for Supercapacitor and Lithium Ion Battery Applications. Journal of Nanoscience and Nanotechnology, 16 (9). pp. 9761-9770.

Inamuddin, Inamuddin and Khan, Ajahar and Jain, Ravi K. and Naushad, Mu (2016) Study and preparation of highly water-stable polyacrylonitrile–kraton–graphene composite membrane for bending actuator toward robotic application. Journal of Intelligent Material Systems and Structures, 27 (11). pp. 1534-1546.

Ghosh, D. and Mukherjee, S. and Das, S. and Mitra, S.K. (2016) Effect of yttria(Y2O3) coating for high temperature oxidation resistance of 9Cr-1Mo steel. Protection of Metals and Physical Chemistry of Surfaces, 52 (4). pp. 737-743.

Sengupta, D. and Das, P. and Mondal, B. and Mukherjee, K. (2016) Effects of doping, morphology and film-thickness of photo-anode materials for dye sensitized solar cell application – A review. Renewable and Sustainable Energy Reviews, 60. pp. 356-376.

Mandal, N. and Mondal, S. and Mondal, A. and Mukherjee, K. and Mondal, B. (2016) Response surface modeling of Cu(II) removal from wastewater using fish scale-derived hydroxyapatite: application of Box–Behnken experimental design. Desalination and Water Treatment, 57 (33). pp. 15410-15423.

Singh, Rohit Kumar and Ruj, Biswajit (2016) Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste. Fuel, 174. pp. 164-171.

Tiwari, A. and Mondal, I. and Ghosh, S. and Chattopadhyay, N. and Pal, U. (2016) Fabrication of mixed phase TiO2 heterojunction nanorods and their enhanced photoactivities. Physical Chemistry Chemical Physics , 18 (22). pp. 15260-15268.

Nandy, Anirban and Loha, Chanchal and Gu, Sai and Sarkar, Pinaki and Karmakar, Malay K. and Chatterjee, Pradip K. (2016) Present status and overview of Chemical Looping Combustion technology. Renewable and Sustainable Energy Reviews, 59. pp. 597-619.

Wu, Jing-Yun and Zhong, Ming-Shiou and Chiang, Ming-Hsi and Bhattacharya, Dibyendu and Lee, Yen-Wei and Lai, Long-Li (2016) Anion-Directed Copper(II) Metallocages, Coordination Chain, and Complex Double Salt: Structures, Magnetic Properties, EPR Spectra, and Density Functional Study. Chemistry, 22 (21). pp. 7238-7247.

Das, Prosenjit and Samanta, Sudip K. and Bera, Supriya and Dutta, Pradip (2016) Microstructure Evolution and Rheological Behavior of Cooling Slope Processed Al-Si-Cu-Fe Alloy Slurry. Metallurgical and Materials Transactions A, 47 (5). pp. 2243-2256.

Murugan, T. and De, S. and Sreevatsa, A. and Dutta, A. (2016) Numerical simulation of a compressible vortex–wall interaction. Shock Waves, 26 (3). pp. 311-326.

Mishra, Alok and Saha, Atanu and Maity, Joydeep (2016) Development of high strength ductile eutectoid steel through cyclic heat treatment involving incomplete austenitization followed by forced air cooling. Materials Characterization, 114. pp. 277-288.

Bae, Seon Hyeong and Layek, Rama K. and Lee, Seung Hee and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2016) Effects of the reduction of PAni-coated oxidized multiwall carbon nanotubes on the positive temperature coefficient behaviors of their carbon black/high density polyethylene composites. Polymer Testing, 50. pp. 83-93.

Sarkar, Papiya and Saha, Amrita and Chatterjee, Debabrata (2016) Oxidation of captopril by hydrogen peroxide and peroxomonosulfate ion catalyzed by a ruthenium(III) complex: kinetic and mechanistic studies. Transition Metal Chemistry, 41 (3). pp. 279-286.

Usha, K. and Kumbhakar, P. and Mondal, B. (2016) Effect of Ag-doped TiO2 thin film passive layers on the performance of photo-anodes for dye-sensitized solar cells. Materials Science in Semiconductor Processing, 43. pp. 17-24.

Kumar, J. Sharath and Jana, Milan and Khanra, Partha and Samanta, Pranab and Koo, Hyeyoung and Murmu, Naresh Chandra and Kuila, Tapas (2016) One pot synthesis of Cu2O/RGO composite using mango bark extract and exploration of its electrochemical properties. Electrochimica Acta, 193. pp. 104-115.

Ghosh, Pritam and Kumar, Neeraj and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2016) Sensitive and fluorescent Schiff base chemosensor for pico molar level fluoride detection: In vitro study and mimic of logic gate function. Sensors and Actuators B: Chemical, 224. pp. 899-906.

Saha, Sourav Kr. and Hens, Abhiram and Murmu, Naresh Chandra and Banerjee, Priyabrata (2016) A comparative density functional theory and molecular dynamics simulation studies of the corrosion inhibitory action of two novel N-heterocyclic organic compounds along with a few others over steel surface. Journal of Molecular Liquids, 215. pp. 486-495.

Kundu, Abhishek and De, Sudipta (2016) Application of compact schemes in the CUSP framework for strong shock–vortex interaction. Computers & Fluids, 126. pp. 192-204.

Ghosh, D. and Das, S. and Mitra, S.K. (2016) Effect of Plasma Sprayed Yttria Stabilized Zirconia(YSZ) Coating for High Temperature Oxidation Resistance of Low Alloy Steel. Protection of Metals and Physical Chemistry of Surfaces, 52 (2). pp. 323-328.

Sarkar, M. and Nandy, S. and Vadali, S.R.K. and Roy, S. and Shome, S.N. (2016) Modelling and simulation of a robust energy efficient AUV controller. Mathematics and Computers in Simulation, 121. pp. 34-47.

Sarkar, Papiya and Chatterjee, Debabrata (2016) Oxidation of Ru(III)-Bound Thiocyanate with Peroxomonosulfate: Kinetic and Mechanistic Studies. International Journal of Chemical Kinetics, 48 (3). pp. 117-123.

Hens, Abhiram and Mondal, Kartick and Biswas, Gautam and Bandyopadhyay, Dipankar (2016) Pathways from disordered to ordered nanostructures from defect guided dewetting of ultrathin bilayers. Journal of Colloid and Interface Science, 465. pp. 128-139.

Goswami, Mrinmoy and Ghosh, Ranajit and Maruyama, Takahiro and Meikap, Ajit Kumar (2016) Polyaniline/carbon nanotube/CdS quantum dot composites with enhanced optical and electrical properties. Applied Surface Science, 364. pp. 176-180.

Prusty, Gyanaranjan and Guria, Amit K. and Mondal, Indranil and Dutta, Anirban and Pal, Dr. Ujjwal and Pradhan, Dr. Narayan (2016) Modulated Binary–Ternary Dual Semiconductor Heterostructures. Angewandte Chemie, 128 (8). pp. 2755-2758.

Singh, B.K. and Mondal, B. and Mandal, Nilrudra (2016) Machinability evaluation and desirability function optimization of turning parameters for Cr2O3 doped zirconia toughened alumina (Cr-ZTA) cutting insert in high speed machining of steel. Ceramics International, 42 (2(B)). pp. 3338-3350.

Sarkar, Papiya and Chatterjee, Debabrata (2016) Oxidation of thiourea by peroxomonosulfate ion catalyzed by a ruthenium(III) complex: kinetic and mechanistic studies. Transition Metal Chemistry, 41 (1). pp. 9-13.

Ghosh, D. and Shukla, A.K. and Mitra, S.K. and Satpati, B. (2016) High-Temperature Corrosion Behavior of Different Regions of Weldment of 2.25Cr-1Mo Steel in SO2 + O2 Atmosphere. Journal of Materials Engineering and Performance, 25 (2). pp. 421-430.

Ghosh, Shatadal and Ray, Ranjit and Vadali, Siva Ram Krishna and Shome, Sankar Nath and Nandy, Sambhunath (2016) Reliable pose estimation of underwater dock using single camera: a scene invariant approach. Machine Vision and Applications, 27 (2). pp. 221-236.

Jana, Milan and Kumar, J. Sharath and Khanra, Partha and Samanta, Pranab and Koo, Hyeyoung and Murmu, Naresh Chandra and Kuila, Tapas (2016) Superior performance of asymmetric supercapacitor based on reduced graphene oxide–manganese carbonate as positive and sono-chemically reduced graphene oxide as negative electrode materials. Journal of Power Sources, 303. pp. 222-233.

Chatterjee, Dipankar and Sinha, Chiranjit (2016) Effect of Prandtl number and rotation on vortex shedding behind a circular cylinder subjected to cross buoyancy at subcritical Reynolds number. International Communications in Heat and Mass Transfer, 70. pp. 1-8.

Dutta, Samik and Pal, Surjya K. and Sen, Ranjan (2016) On-machine tool prediction of flank wear from machined surface images using texture analyses and support vector regression. Precision Engineering, 43. pp. 34-42.

Dutta, Samik and Pal, Surjya K. and Sen, Ranjan (2016) Progressive tool flank wear monitoring by applying discrete wavelet transform on turned surface images. Measurement, 77. pp. 388-401.

Maruyama, Takahiro and Kondo, Hiroki and Ghosh, Ranajit and Kozawa, Akinari and Naritsuka, Shigeya and Iizumi, Yoko and Okazaki, Toshiya and Iijima, Sumio (2016) Single-walled carbon nanotube synthesis using Pt catalysts under low ethanol pressure via cold-wall chemical vapor deposition in high vacuum. Carbon, 96. pp. 6-13.

Sarkar, Papiya and Saha, Amrita and Chatterjee, Debabrata (2016) [RuIII(EDTA)(H2O)]- mediated oxidation of cellular thiols by HSO5-. New Journal of Chemistry, 40 (11). pp. 9380-9384.

Sarkar, Papiya and Saha, Amrita and Chatterjee, Debabrata (2016) [RuIII(EDTA)(H2O)]− catalyzed oxidation of biologically important thiols by H2O2. Journal of Coordination Chemistry, 69 (22). pp. 3417-3423.

Sivaprakash, S. and Sivaprakash, Prabhavathy (2016) A facile synthesis of graphene foam as electrode material for supercapacitor. Materials Research Express, 3. 075020.

Kumar, Rajulapati Vinod and Pal, Aniruddha and Saha, Sucharita and Mandal, Soumen (2016) A stepper-piezo-based co-actuation paradigm for tool positioning in parallel spark micro-electro-discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 230 (11). pp. 2136-2139.

Saha, Sanjit and Jana, Milan and Khanra, Partha and Samanta, Pranab and Koo, Hyeyoung and Murmu, Naresh Chandra and Kuila, Tapas (2016) Band gap modified boron doped NiO/Fe3O4 nanostructure as the positive electrode for high energy asymmetric supercapacitors. RSC Advances, 6 (2). pp. 1380-1387.

Mistry, Kalyan Kumar and Layek, Keya and Chell, Tarak Nath and Chaudhuri, Chirasree Roy and Saha, Hiranmay (2016) Design and development of an amperometric immunosensor based on screen-printed electrodes. Analytical Methods, 8 (15). pp. 3096-3101.

Shukla, N. and Roy, H. and Show, B.K. (2016) Effect of prior austempering heat treatment on the microstructure, mechanical properties and high-stress abrasive wear behaviour of a 0·33% C dual-phase steel. Canadian Metallurgical Quarterly , 55 (1). pp. 13-22.

Saha, Sanjit and Jana, Milan and Samanta, Pranab and Murmu, Naresh C. and Kuila, Tapas (2016) Efficient Access of Voltammetric Charge in Hybrid Supercapacitor Configured with Potassium Incorporated Nanographitic Structure Derived from Cotton (Gossypium arboreum) as Negative and Ni(OH)2/rGO Composite as Positive Electrode. Industrial & Engineering Chemistry Research, 55 (42). pp. 11074-11084.

Arun, Ravi Kumar and Singh, Preeti and Biswas, Gautam and Chanda, Nripen and Chakraborty, Suman (2016) Energy generation from water flow over a reduced graphene oxide surface in a paper–pencil device. Lab on a Chip, 16 (18). pp. 3589-3596.

Dutta, Alokdut and Saha, Sourav Kr. and Banerjee, Priyabrata and Patra, Apurba K. and Sukul, Dipankar (2016) Evaluating corrosion inhibition property of some Schiff bases for mild steel in 1 M HCl: competitive effect of the heteroatom and stereochemical conformation of the molecule. RSC Advances, 6 (78). 74833-74844 .

Pati, Jnyana Ranjan and Dutta, Subhajit and Eliaers, Philippe and Mahanta, Pinakeswar and Chatterjee, Pradip Kumar and Wilde, Juray De (2016) Experimental study of paddy drying in a vortex chamber. Drying Technology, 34 (9). pp. 1073-1084.

Chatterjee, Debabrata and Sarkar, Papiya and Oszajca, Maria and Eldik, Rudi van (2016) Formation of [RuIII(edta)(SNO)]2– in RuIII(edta)-Mediated S-Nitrosylation of Bisulfide Ion. Inorganic Chemistry, 55 (10). pp. 5037-5040.

Jana, Milan and Saha, Sanjit and Samanta, Pranab and Murmu, Naresh Chandra and Kim, Nam Hoon and Kuila, Tapas and Lee, Joong Hee (2016) Growth of Ni–Co binary hydroxide on a reduced graphene oxide surface by a successive ionic layer adsorption and reaction (SILAR) method for high performance asymmetric supercapacitor electrodes. Journal of Material Chemistry A, 4 (6). pp. 2188-2197.

Das , P. and Mondal, B. and Mukherjee, K. (2016) Hierarchical zinc oxide nano-tips and micro-rods: hydrothermal synthesis and improved chemi-resistive response towards ethanol. RSC Advances, 6 (2). pp. 1408-1414.

Ghosh, Pritam and Banerjee, Priyabrata (2016) How paramagnetic and diamagnetic LMOCs detect picric acid from surface water and the intracellular environment: a combined experimental and DFT-D3 study. Physical Chemistry Chemical Physics, 18 (33). pp. 22805-22815.

Gupta, Satish Kumar and Ray, Sudipta and Chatterjee, Dipankar (2016) Influence of Aiding Buoyancy on the Suppression of Flow Separation for Power-Law Fluids Around a Circular Object. Heat Transfer Engineering , 37 (15). pp. 1267-1279.

Chatterjee, Dipankar and Halder, Pabitra (2016) Magnetoconvective Transport in a Lid-Driven Square Enclosure with Two Rotating Circular Cylinders. Heat Transfer Engineering, 37 (2). pp. 198-209.

Das, P. and Islam, Sk. T. and Das, S. (2016) Micromechanics based modelling of deformation behaviour of grain refined rheocast Al–7Si–0.3Mg alloy. Materials Science and Technology , 32 (9). pp. 898-914.

Das, Prosenjit and Islam, Sk. Tanbir and Samanta, Sudip K. and Das, Santanu (2016) Microscale deformation behavior of rheocast Al–7Si–0.3 Mg alloy. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230 (6). pp. 1041-1061.

Ghosh, D. and Roy, H. and Das, S. and Mitra, S.K. (2016) Nanostructured CeO2 coating for high temperature oxidation protection. Surface Engineering, 32 (6). pp. 397-403.

Saha, Sourav Kr. and Dutta, Alokdut and Ghosh, Pritam and Sukul, Dipankar and Banerjee, Priyabrata (2016) Novel Schiff-base molecules as efficient corrosion inhibitors for mild steel surface in 1 M HCl medium: experimental and theoretical approach. Physical Chemistry Chemical Physics, 18 (27). 17898-17911 .

Singh, Preeti and Nath, Peuli and Arun, Ravi Kumar and Mandal, Soumen and Chanda, Nripen (2016) Novel synthesis of a mixed Cu/CuO–reduced graphene oxide nanocomposite with enhanced peroxidase-like catalytic activity for easy detection of glutathione in solution and using a paper strip. RSC Advances, 6 (95). 92729-92738 .

Mondal, B. and Chatterjee, D. (2016) Numerical Investigation of the Water Droplet Transport in a PEM Fuel Cell with Serpentine Flow Channel. Journal of Applied Fluid Mechanics, 9 (3). pp. 1057-1071. ISSN 1735-3572

Dutta, Anirban and Dutta, Sumit K. and Mehetor, Shyamal K. and Mondal, Indranil and Pal, Ujjwal and Pradhan, Narayan (2016) Oriented Attachments and Formation of Ring-on-Disk Heterostructure Au–Cu3P Photocatalysts. Chemistry of Materials, 28 (6). pp. 1872-1878.

Arun, Ravi Kumar and Priyadarshini, Nivedita and Chaudhury, Kaustav and Chanda, Nripen and Biswas, Gautam and Chakraborty, Suman (2016) Paper-PDMS hybrid microchannel: a platform for rapid fluid-transport and mixing. Journal of Micromechanics and Microengineering, 26 (10). 105008 ( ).

Saha, Binod Kumar and Gangopadhyay, Tapas and Sanyal, Dipankar (2016) Pilot-Dynamics Coupled Finite-Volume Analysis of Main Flow Transients Through a Pneumatic Pressure-Regulating Valve. Journal of Dynamic Systems, Measurement, and Control, 138 (2). 021008 (10 pages).

Gupta, R.N. and Das, A.K. and Nagahanumaiah, Nagahanumaiah and Shah, Henal (2016) Pulse Electrocodeposited Ni–WC Composite Coating. Materials and Manufacturing Processes, 31 (1). pp. 42-47.

Banerjee, Jeet and Ray, Ranjit and Vadali, Siva Ram Krishna and Shome, Sankar Nath and Nandy, Sambhunath (2016) Real-time underwater image enhancement: An improved approach for imaging with AUV-150. Sadhana, 41 (2). pp. 225-238.

Chatterjee, Debabrata and Sarkar, Papiya (2016) RuIII(edta) catalyzed hydrogenation of bicarbonate to formate. Journal of Coordination Chemistry , 69 (4). pp. 650-655.

Mondal, Tapashree and Chatterjee, Debabrata (2016) RuIII-edta (edta4− = ethylenediaminetetraacetate) mediated photocatalytic conversion of bicarbonate to formate over visible light irradiated non-metal doped TiO2 semiconductor photocatalysts. RSC Advances, 6 (68). pp. 63488-63492.

Mondal, Indranil and Tiwari, Amritanjali and Ghosh, Rajib and Pal, Ujjwal (2016) Shedding light on hydroxyquinoline-based ruthenium sensitizers with a long-lived charge carrier to boost photocatalytic H2 evolution. RSC Advances, 6 (47). 41165-41172 .

Mondal, Indranil and Pal, Ujjwal (2016) Synthesis of MOF templated Cu/CuO@TiO2 nanocomposites for synergistic hydrogen production. Physical Chemistry Chemical Physics, 18 (6). 4780-4788 .

Kaya, Savaş and Banerjee, Priyabrata and Saha, Sourav Kr. and Tüzün, Burak and Kaya, Cemal (2016) Theoretical evaluation of some benzotriazole and phospono derivatives as aluminum corrosion inhibitors: DFT and molecular dynamics simulation approaches. RSC Advances, 6 (78). pp. 74550-74559.

Chatterjee, D. and Gupta, S.K. (2016) Thermo-Magneto-Convective Transport around a Square Cylinder in a Square Duct under Strong Axial Magnetic Field. Journal of Applied Fluid Mechanics, 9 (5). pp. 2167-2175. ISSN 1735-3572

Bhat, Nagaraj N. and Dutta, Samik and Pal, Surjya K. and Pal, Srikanta (2016) Tool condition classification in turning process using hidden Markov model based on texture analysis of machined surface images. Measurement, 90. pp. 500-509.

Bhat, Nagaraj N. and Dutta, Samik and Vashisth, Tarun and Pal, Srikanta and Pal, Surjya K. and Sen, Ranjan (2016) Tool condition monitoring by SVM classification of machined surface images in turning. The International Journal of Advanced Manufacturing Technology, 83 (9-12). pp. 1487-1502.

Dutta, Samik and Pal, Surjya K. and Sen, Ranjan (2016) Tool Condition Monitoring in Turning by Applying Machine Vision. Journal of Manufacturing Science and Engineering, 138 (5). 051008 (17 pages).

Mandal, Soumen and Sharma, Vimlesh Kumar and Pal, Aniruddha and Nagahanumaiah, Nagahanumaiah (2016) Tool strain–based wear estimation in micro turning using Bayesian networks. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 230 (10). pp. 1952-1960.

Roy, Sritama and Mandal, Soumen and Nagahanumaiah, Nagahanumaiah (2016) Tool–workpiece contact detection in micro-milling using wireless-aided accelerometer sensor. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 230 (1). pp. 182-187.

Shukla, Neha and Roy, Himadri and Show, Bijay Kumar (2016) Tribological Behavior of a 0.33% C Dual-Phase Steel with Pre I/C Hardening and Tempering Treatment under Abrasive Wear Condition. Tribology Transactions, 59 (4). pp. 593-603.

Sinha, Madhumita and Mahapatra, Rajat and Mondal, Biswanath and Maruyama, Takahiro and Ghosh, Ranajit (2016) Ultrafast and Reversible Gas-Sensing Properties of ZnO Nanowire Arrays Grown by Hydrothermal Technique. The Journal of Physical Chemistry C, 120 (5). pp. 3019-3025.

Masum, Habib and Chattopadhyay, Surajit and Bhaumik, Subhasis and Ray, Ranjit (2016) Utilisation of skewness of wavelet-based approximate coefficient in walking speed assessment. IET Science Measurement & Technology, 10 (8). pp. 977-982.

Maikap, A. and Mukherjee, K. and Mondal, B. and Mandal, N. (2016) Zinc oxide thin film based nonenzymatic electrochemical sensor for the detection of trace level catechol. RSC Advances, 6 (69). 64611-64616 .

Roy Chowdhury, Additi and Ghosh, Pritam and Roy, Biswajit Gopal and Mukhopadhyay, Subhra Kanti and Murmu, Naresh Chandra and Banerjee, Priyabrata (2015) Cell permeable fluorescent colorimetric Schiff base chemoreceptor for detecting F−in aqueous solvent. Sensors and Actuators B: Chemical, 220. pp. 347-355.

Das, Prosenjit and Samanta, Sudip K. and Tiwari, Shashank and Dutta, Pradip (2015) Die Filling Behaviour of Semi Solid A356 Al Alloy Slurry During Rheo Pressure Die Casting. Transactions of the Indian Institute of Metals, 68 (6). pp. 1215-1220.

Sheel Thoola, Gautam and Sraveen, K. and Singh, Ajaya Kumar and Pal, Ujjwal and Singh, Surya Prakash (2015) Cowrie-shell architectures: Low temperature growth of Ni doped CdS film. Journal of Alloys and Compounds, 649. pp. 553-558.

Jain, R.K. and Majumder, S. and Ghosh, Bhaskar and Saha, Surajit (2015) Deflection control for piezoelectric actuator through voltage signal and it’s application in micromanipulation. Mechanical Systems and Signal Processing, 62-63. pp. 305-323.

Mistry, Kalyan Kumar and Sagarika, Tallapragada and Roy Chaudhuri, Chirasree and Saha, Hiranmay (2015) Electrochemical Characterization of some Commercial Screen-Printed Electrodes in Different Redox Substrates. Current science, 109 (8). pp. 1427-1436.

Bhat, Nagaraj N. and Kumari, Kanchan and Dutta, Samik and Pal, Surjya K. and Pal, Srikanta (2015) Friction stir weld classification by applying wavelet analysis and support vector machine on weld surface images. Journal of Manufacturing Processes, 20 (1). pp. 274-281.

Mandal, Soumen and Pal, Aniruddha and Arun, Ravi Kumar and Chanda, Nripen (2015) Gold nanoparticle embedded paper with mechanically exfoliated graphite as flexible supercapacitor electrodes. Journal of Electroanalytical Chemistry, 755. pp. 22-26.

Mahapatra, Abhijit and Roy, Shibendu Shekhar and Pratihar, Dilip Kumar (2015) Computer aided modeling and analysis of turning motion of hexapod robot on varying terrains. International Journal of Mechanics and Materials in Design, 11 (3). pp. 309-336.

Dutta, Alokdut and Saha, Sourav Kr. and Banerjee, Priyabrata b, and Sukul, Dipankar (2015) Correlating electronic structure with corrosion inhibition potentiality of some bis-benzimidazole derivatives for mild steel in hydrochloric acid: Combined experimental and theoretical studies. Corrosion Science, 98. pp. 541-550.

Jain, Ravi Kant and Majumder, Somajyoti and Ghosh, Bhaskar (2015) Design and analysis of piezoelectric actuator for micro gripper. International Journal of Mechanics and Materials in Design, 11 (3). pp. 253-276.

Uddin, Md. Elias and Kim, Nam Hoon and Kuila, Tapas and Lee, Seung Hee and Hui, David and Lee, Joong Hee (2015) Preparation of reduced graphene oxide-NiFe2O4 nanocomposites for the electrocatalytic oxidation of hydrazine. Composites Part B: Engineering, 79. pp. 649-659.

Thadela, S. and Mandal, B. and Das, P. and Roy, H. and Lohar , A.K. and Samanta, S.K. (2015) Rheological behavior of semi-solid TiB2 reinforced Al composite. Transactions of Nonferrous Metals Society of China, 25 (9). pp. 2827-2832.

Tiwari, Amritanjali and Pal, Ujjwal (2015) Effect of donor-donor-π-acceptor architecture of triphenylamine-based organic sensitizers over TiO2 photocatalysts for visible-light-driven hydrogen production. International Journal of Hydrogen Energy, 40 (30). pp. 9069-9079.

Zhang, Chunfei and Kuila, Tapas and Kim, Nam Hoon and Lee, Seung Hee and Lee, Joong Hee (2015) Facile preparation of flower-like NiCo2O4/three dimensional graphene foam hybrid for high performance supercapacitor electrodes. Carbon, 89. pp. 328-339.

Ghosh, Bibhuti Bhusan and Sarkar, Bikash Kumar and Saha, Rana (2015) Realtime performance analysis of different combinations of fuzzy–PID and bias controllers for a two degree of freedom electrohydraulic parallel manipulator. Robotics and Computer-Integrated Manufacturing, 34. pp. 62-69.

Roy , Spandan and Nandy, Sambhunath and Ray, Ranjit and Shome, Sankar Nath (2015) Robust path tracking control of nonholonomic wheeled mobile robot: Experimental validation. International Journal of Control, Automation and Systems, 13 (4). pp. 897-905.

Ikkurti, Hanumath Prasad and Saha, Suman (2015) A comprehensive techno-economic review of microinverters for Building Integrated Photovoltaics (BIPV). Renewable and Sustainable Energy Reviews, 47. pp. 997-1006.

Krishna, T. Raghu Vamsi and Barnwal, Rajesh P. and Ghosh, Soumya K. (2015) CAT: Consensus-assisted trust estimation of MDS-equipped collaborators in vehicular ad-hoc network. Vehicular Communications, 2 (3). pp. 150-157.

Nandi, Arup K. and Chakraborty, Debasri and Vaz, Warren (2015) Design of a comfortable optimal driving strategy for electric vehicles using multi-objective optimization. Journal of Power Sources, 283. pp. 1-18.

Ghosh, Pritam and Saha, Sourav Kumar and Roychowdhury, Additi and Banerjee, Priyabrata (2015) Recognition of an Explosive and Mutagenic Water Pollutant, 2,4,6-Trinitrophenol, by Cost-Effective Luminescent MOFs. European Journal of Inorganic Chemistry, 2015 (17). pp. 2851-2857.

Das, Prosenjit and Samanta, Sudip K. and Dutta, Pradip (2015) Rheological Behavior of Al-7Si-0.3Mg Alloy at Mushy State. Metallurgical and Materials Transactions B, 46 (3). pp. 1302-1313.

Saha, Ramesh P. and Choudhury, Biplab and Das, Ranadip K. (2015) A review on adsorption cooling systems with silica gel and carbon as adsorbents. Renewable and Sustainable Energy Reviews, 45. pp. 123-134.

Chakraborty, Tanmoy and Hens, Abhiram and Kulashrestha, Shashank and Murmu, Naresh Chandra and Banerjee, Priyabrata (2015) Calculation of diffusion coefficient of long chain molecules using molecular dynamics. Physica E: Low-dimensional Systems and Nanostructures, 69. pp. 371-377.

Ghosh, D. and Mukherjee, S. and Das, S. (2015) Ceria based coating for high temperature corrosion protection of 9Cr-1Mo steel. Protection of Metals and Physical Chemistry of Surfaces, 51 (3). pp. 441-447.

Jain, Ravi K. and Majumder, Somajoyti and Ghosh, Bhaskar and Saha, Surajit (2015) Design and manufacturing of mobile micro manipulation system with a compliant piezoelectric actuator based micro gripper. Journal of Manufacturing Systems, 35. pp. 76-91.

Ghosh, D. and Ray, S. and Mandal, A. and Roy, H. (2015) Failure Investigation of Radiant Platen Superheater Tube of Thermal Power Plant Boiler. High Temperature Materials and Processes, 34 (2). pp. 171-175.

Ghosh, Pritam and Chowdhury, Additi Roy and Saha, Sourav Kr. and Ghosh, Meenakshi and Pal, Mrinal and Murmu, Naresh Chandra and Banerjee, Priyabrata (2015) Synthesis and characterization of redox non-innocent cobalt(III) complexes of a O,N,O donor ligand: Radical generation, semi-conductivity, antibacterial and anticancer activities. Inorganica Chimica Acta, 429. pp. 99-108.

Sen, Rajat and Pati, Chinmoy and Dutta, Samik and Sen, Ranjan (2015) Comparison between three tuning methods of PID control for high precision positioning stage. MAPAN, 30 (1). pp. 65-70.

Islam, Sk. Tanbir and Das, Prosenjit and Das, Santanu (2015) Deformation behaviour of Rheocast A356 Al alloy at microlevel considering approximated RVEs. Metals and Materials International, 21 (2). pp. 311-323.

Saha, Sourav Kr. and Ghosh, Pritam and Hens, Abhiram and Murmu, Naresh Chandra and Banerjee, Priyabrata (2015) Density functional theory and molecular dynamics simulation study on corrosion inhibition performance of mild steel by mercapto-quinoline Schiff base corrosion inhibitor. Physica E: Low-dimensional Systems and Nanostructures, 66. pp. 332-341.

Jana , M. and Saha , S. and Samanta, P. and Murmu, N.C. and Kim , N.H. and Kuila, T. and Lee , J.H. (2015) Development of high energy density supercapacitor through hydrothermal synthesis of RGO/nano-structured cobalt sulphide composites. Nanotechnology, 26 (7). 075402 .

Mondal, Manas Kumar and Biswas, Koushik and Saha, Atanu and Maity, Joydeep (2015) Dry Sliding Wear Behavior of a Novel 6351 Al-Al4SiC4 Composite. Journal of Materials Engineering and Performance, 24 (2). pp. 759-770.

Usha, K. and Mondal, B. and Sengupta, D. and Kumbhakar, P. (2015) Photo-conversion efficiency measurement of dye-sensitised solar cell using nanocrystalline TiO2 thin film as photo-anodes. Measurement, 61. pp. 21-26.

Chatterjee, Dipankar and Biswas, Gautam (2015) Dynamic behavior of flow around rows of square cylinders kept in staggered arrangement. Journal of Wind Engineering and Industrial Aerodynamics, 136. pp. 1-11.

Kumar, Anand and Hens, Abhiram and Arun, Ravi Kumar and Chatterjee, Monosree and Mahato, Kuldeep and Layek, Keya and Chanda, Nripen (2015) A paper based microfluidic device for easy detection of uric acid using positively charged gold nanoparticles. Analyst, 140 (6). pp. 1817-1821.

Roy Chowdhury, Additi and Ghosh, Pritam and Roy, Biswajit Gopal and Mukhopadhyay, Subhra Kanti and Mitra, Partha and Banerjee, Priyabrata (2015) A simple and dual responsive efficient new Schiff base chemoreceptor for selective sensing of F− and Hg2+: application to bioimaging in living cells and mimicking of molecular logic gates. RSC Advances, 5 (76). pp. 62017-62023.

Kumari, Amritanjali and Mondal, Indranil and Pal, Ujjwal (2015) A simple carbazole based sensitizer attached to a Nafion-coated-TiO2 photocatalyst: the impact of controlling parameters towards visible light driven H2 production. New Journal of Chemistry, 39 (1). pp. 713-720.

Saha, Sourav Kr. and Banerjee, Priyabrata (2015) A theoretical approach to understand the inhibition mechanism of steel corrosion with two aminobenzonitrile inhibitors. RSC Advances, 5 (87). pp. 71120-71130.

Bhattacharya, Dibyendu (2015) A two-component co-crystal of Cu(II) complex of p-tolyl-terpyridine. Indian Journal of Chemistry, Section -A, 54A. pp. 35-39.

Saha, Sourav Kr. and Dutta, Alokdut and Ghosh, Pritam and Sukul, Dipankar and Banerjee, Priyabrata (2015) Adsorption and corrosion inhibition effect of Schiff base molecules on the mild steel surface in 1 M HCl medium: a combined experimental and theoretical approach. Physical Chemistry Chemical Physics, 17. pp. 5679-5690.

Adhikary, Jaydeep and Banerjee, Priyabrata and Chattopadhyay, Tanmay (2015) Alumina-supported Mn(III) and Fe(III) complexes of tridentate Schiff base ligand having ONO-donor sites: Syntheses, characterization and olefin epoxidation study. Indian Journal of Chemistry -Section A , 54A (10). pp. 1175-1182.

Mondol, Koustov and Azad, M.S. and Puri, A.B. (2015) Analysis of micro-electrical discharge drilling characteristics in a thin plate of Ti–6Al–4 V. The International Journal of Advanced Manufacturing Technology, 76 (1). pp. 141-150.

Mandal, Nilrudra and Mondal, B. and Doloi, B. (2015) Application of Back Propagation Neural Network Model for Predicting Flank Wear of Yttria Based Zirconia Toughened Alumina (ZTA) Ceramic Inserts. Transactions of the Indian Institute of Metals, 68 (5). pp. 783-789.

Saha, Sanjit and Jana, Milan and Khanra, Partha and Samanta, Pranab and Koo, Hyeyoung and Murmu, Naresh Chandra and Kuila, Tapas (2015) Band gap engineering of boron nitride by graphene and its application as positive electrode material in asymmetric supercapacitor device. ACS Applied Materials & Interfaces, 7 (26). pp. 14211-14222.

Ghosh, D. and Mukherjee, S.K. and Das, S. and Mitra, S.K. (2015) CeO2 based coating for high temperature oxidation protection. Surface Engineering, 31 (5). pp. 323-328.

Mahata , S. and Mondal, B. and Mahata, S.S. and Usha, K. and Mandal, N. and Mukherjee, K. (2015) Chemical modification of titanium isopropoxide for producing stable dispersion of titania nano-particles. Materials Chemistry and Physics, 151. pp. 267-274.

Ghosh, Pritam and Roy, Biswajit Gopal and Jana, Saibal and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2015) Colorimetric and fluorimetric response of Schiff base molecules towards fluoride anions, solution test kit fabrication, logical interpretation and DFT-D3 study. Physical Chemistry Chemical Physics, 17 (31). pp. 20288-20295.

Bala, Sukhen and Mondal, Indranil and Goswami, Arijit and Pal, Ujjwal and Mondal, Raju (2015) Co-MOF as a sacrificial template: manifesting a new Co3O4/TiO2 system with a p–n heterojunction for photocatalytic hydrogen evolution. Journal of Materials Chemistry A, 3 (40). pp. 20288-20296.

Chebolu, A. and Nagahanumaiah, Nagahanumaiah (2015) Contact angle measurement on micropatterned surface using sessile drop shape fit profile detection. The Imaging Science Journal, 63 (7). pp. 389-397.

Chatterjee, Dipankar and Gupta, Satish Kumar (2015) Convective transport around a rotating square cylinder at moderate Reynolds numbers. Numerical Heat Transfer, Part A: Applications: An International Journal of Computation and Methodology, 67 (12). pp. 1386-1407.

Chatterjee, Dipankar and Gupta, Satish Kumar (2015) Convective transport around rows of square cylinders arranged in a staggered fashion at moderate Reynolds number. Numerical Heat Transfer, Part A: Applications: An International Journal of Computation and Methodology, 68 (4). pp. 388-410.

Inamuddin, Inamuddin and Khan, Ajahar and Jain, R K and Naushad, Mu (2015) Development of sulfonated poly(vinyl alcohol)/polpyrrole based ionic polymer metal composite (IPMC) actuator and its characterization. Smart Materials and Structures, 24 (9). 095003.

Narayanaswamy, K. and Tiwari, Amritanjali and Mondal, Indranil and Pal, Ujjwal and Niveditha, S. and Bhanuprakash, K. and Singh, Surya Prakash (2015) Dithiafulvalene functionalized diketopyrrolopyrrole based sensitizers for efficient hydrogen production. Physical Chemistry Chemical Physics, 17. pp. 13710-13718.

Sivaprakash, Prabhavathy and DasGupta, Sunando (2015) Effect of air sparging on flux enhancement during tangential flow filtration of degreasing effluent. Desalination and Water Treatment, 53. pp. 73-83.

Chatterjee, Dipankar and Mondal, Bittagopal (2015) Effect of Thermal Buoyancy on Fluid Flow and Heat Transfer Across a Semicircular Cylinder in Cross-Flow at Low Reynolds Numbers. Numerical Heat Transfer, Part A: Applications, 67 (4). pp. 436-453.

Khanra, Partha and Uddin, Md. Elias and Kim, Nam Hoon and Kuila, Tapas and Lee, Seung Hee and Lee, Joong Hee (2015) Electrochemical performance of reduced graphene oxide surface-modified with 9-anthracene carboxylic acid. RSC Advances, 5 (9). pp. 6443-6451.

Hens, Abhiram and Biswas, Gautam and De, Sudipta (2015) Evaporation of water droplets on Pt-surface in presence of external electric field—A molecular dynamics study. Journal of Chemical Physics, 143 (9). 094702 (1-12).

Khan, Ajahar and Inamuddin, Inamuddin and Jain, R.K. and Naushad, Mu. (2015) Fabrication of a silver nano powder embedded kraton polymer actuator and its characterization. RSC Advances, 5 (111). pp. 91564-91573.

Mukhopadhyay, Soumita and Mondal, Indranil and Pal, Ujjwal and Devi, Parukuttyamma Sujatha (2015) Fabrication of hierarchical ZnO/CdS heterostructured nanocomposites for enhanced hydrogen evolution from solar water splitting. Physical Chemistry Chemical Physics, 17 (31). pp. 20407-20415.

Swetha, T. and Mondal, Indranil and Bhanuprakash, K. and Pal, Ujjwal and Singh, Surya Prakash (2015) First Study on Phosphonite-Coordinated Ruthenium Sensitizers for Efficient Photocatalytic Hydrogen Evolution. ACS Applied Materials & Interfaces, 7 (35). pp. 19635-19642.

Gupta, Satish Kumar and Ray, Sudipta and Chatterjee, Dipankar (2015) Forced Convection Heat Transfer in Power-Law Fluids Around a Semicircular Cylinder at Incidence. Numerical Heat Transfer, Part A: Applications, 67 (9). pp. 952-971.

Atyam, K.K. and Ghosh, A. and Mukherjee, K. and Majumder, S.B. (2015) Hematite iron oxide nano-particles: facile synthesis and their chemi-resistive response towards hydrogen. Materials Research Express, 2 (5). 55901(1-7).

Ghosh, D. and Mitra, S.K. (2015) High Temperature Corrosion Behavior of Cold Deformed 2.25 Cr-1 Mo Steel in SO2 + O2 Atmosphere. High Temperature Materials and Processes, 34 (2). pp. 107-114. ISSN 0334-6455

Kundu, Abhishek and De, Sudipta (2015) High-resolution Euler simulation of a cylindrical blast wave in an enclosure. Journal of Visualization, 18 (4). pp. 733-738.

Ghosh, D. and Ray, S. and Roy, H. and Mandal, N. and Shukla, A.K. (2015) High-Temperature Graphitization Failure of Primary Superheater Tube. High Temperature Materials and Processes, 34 (8). pp. 777-781. ISSN 0334-6455

Batabyal, A.K. and Chakraborty, S. (2015) Hydrogeochemistry and Water Quality Index in the Assessment of Groundwater Quality for Drinking Uses. Water Environment Research, 87 (7). pp. 607-617.

Saha, Sanjit and Jana, Milan and Samanta, Pranab and Murmu, Naresh Chandra and Kuila, Tapas (2015) In situ preparation of a SAC-RGO@Ni electrode by electrochemical functionalization of reduced graphene oxide using sulfanilic acid azocromotrop and its application in asymmetric supercapacitors. Journal of Materials Chemistry A, 3. pp. 19461-19468.

Chatterjee, Dipankar and Sengupta, Amrita and Debnath, Nandini and De, Sudipta (2015) Influence of an adiabatic square cylinder on hydrodynamic and thermal characteristics in a two-dimensional backward-facing step channel. Heat Transfer Research, 46 (1). pp. 63-89.

Chatterjee, Debabrata and Jaiswal, Namita and K., Jagadish C. Bose and Mahato, Ram Balak and Bhattacharyya, Diptendu (2015) Interaction of RuIII(EDTA) with cellular thiols and O2: biological implications thereof. Journal of Coordination Chemistry, 68 (17-18). pp. 3229-3235.

Ghosh, D. and Ray, S. and Roy, H. and Shukla, A.K. (2015) Investigation into Cause of High Temperature Failure of Boiler Superheater Tube. High Temperature Materials and Processes, 34 (2). pp. 141-146.

Gupta, Satish Kumar and Chatterjee, Dipankar and Mondal, Bittagopal (2015) Investigation of Mixed Convection in a Ventilated Cavity in the Presence of a Heat Conducting Circular Cylinder. Numerical Heat Transfer, Part A: Applications, 67 (1). pp. 52-74.

Jana, Milan and Saha, Sanjit and Samanta, Pranab and Murmu, Naresh Chandra and Lee, Joong Hee and Kuila, Tapas (2015) Investigation of the capacitive performance of tobacco solution reduced graphene oxide. Materials Chemistry and Physics, 151. pp. 72-80.

Kumar, M. Phani and Samanta, P. and Murmu, Naresh Chandra (2015) Investigation of velocity slip effect on steady state characteristics of finite hydrostatic double-layered porous oil journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229 (7). pp. 773-784.

Barman, S. and Hanumaiah, Naga and Puri, A.B. (2015) Investigation on shape, size, surface quality and elemental characterization of high-aspect-ratio blind micro holes in die sinking micro EDM. The International Journal of Advanced Manufacturing Technology, 76 (1). pp. 115-126.

Bansal, Suraj and Chatterjee, Dipankar (2015) Magneto-Convective Transport of Nanofluid in a Vertical Lid-Driven Cavity Including a Heat-Conducting Rotating Circular Cylinder. Numerical Heat Transfer, Part A: Applications, 68 (4). pp. 411-431.

Chatterjee, Dipankar and Gupta, Satish Kumar (2015) MHD flow and heat transfer behind a square cylinder in a duct under strong axial magnetic field. International Journal of Heat and Mass Transfer, 88. pp. 1-13.

Sharma, Pankaj and Roy, Himadri (2015) Mill Scale Corrosion and Prevention in Carbon Steel Heat Exchanger. High Temperature Materials and Processes, 34 (6). pp. 571-576.

Chatterjee, Dipankar and Mondal, Bittagopal (2015) Mixed convection heat transfer from an equilateral triangular cylinder at low reynolds numbers. Heat Transfer Engineering, 36 (1). pp. 123-133.

Eliaers, Philippe and Pati, Jnyana Ranjan and Dutta, Subhajit and Wilde, Juray De (2015) Modeling and simulation of biomass drying in vortex chambers. Chemical Engineering Science, 123. pp. 648-664.

Goyal, H. and Mandal, N. and Roy, H. and Mitra, S.K. and Mondal, B. (2015) Multi Response Optimization for Processing Al–SiCp Composites: An Approach Towards Enhancement of Mechanical Properties. Transactions of the Indian Institute of Metals, 68 (3). pp. 453-463.

Das, P. and Sengupta, D. and Kasinadhuni, U. and Mondal, B. and Mukherjee, K. (2015) Nano-crystalline thin and nano-particulate thick TiO2 layer: Cost effective sequential deposition and study on dye sensitized solar cell characteristics. Materials Research Bulletin, 66. pp. 32-38.

Ghosh, D. and Roy, H. and Mitra, S.K. (2015) Nanostructured Y2O3 plasma coating for high temperature oxidation protection. Journal of Adhesion Science and Technology, 29 (10). pp. 954-964.

Yana, Yinan and Kuila, Tapas and Kim, Nam Hoon and Lee, Seung Hee and Lee, Joong Hee (2015) N-doped carbon layer coated thermally exfoliated graphene and its capacitive behavior in redox active electrolyte. Carbon, 85. pp. 60-71.

Mondal, Indranil and Pal, Ujjwal (2015) Noble metal free naphthylbisimide/TiO2/graphene: an efficient H2 evolution photocatalyst. New Journal of Chemistry, 39 (9). pp. 6925-6934.

Jana, Milan and Saha, Sanjit and Khanra, Partha and Samanta, Pranab and Koo, Hyeyoung and Murmu, Naresh Chandra and Kuila, Tapas (2015) Non-covalent functionalization of reduced graphene oxide using sulfanilic acid azocromotrop and its application as a supercapacitor electrode material. Journal of Materials Chemistry A, 3. pp. 7323-7331.

Chatterjee, Dipankar and Gupta, Satish Kumar (2015) Numerical Study of the Laminar Flow Past a Rotating Square Cylinder at Low Spinning Rates. Journal of Fluids Engineering, 137 (2). 021204(1-10).

Shome, Saikat Kumar and Prakash, Mangal and Pradhan, Sourav and Mukherjee, Arpita (2015) On Synergistic Integration of Adaptive Dithering Based Internal Model Control for Hysteresis Compensation in Piezoactuated Nanopositioner. Mathematical Problems in Engineering, 2015. 365141(1-19).

Rollinsona, Andrew N. and Karmakar, Malay K. (2015) On the reactivity of various biomass species with CO2 using a standardised methodology for fixed-bed gasification. Chemical Engineering Science, 128. pp. 82-91.

Meriga, Venkanna and Valligatla, Sreeramulu and Sundaresan, Sivaprakash and Cahill, Caroline and Dhanak, Vinod R. and Chakraborty, Amit K. (2015) Optical, electrical, and electrochemical properties of graphene based water soluble polyaniline composites. Journal of Applied Polymer Science, 132 (45). 42766(1-9).

Chakraborty, Debasri and Vaz, Warren and Nandi, Arup Kr. (2015) Optimal driving during electric vehicle acceleration using evolutionary algorithms. Applied Soft Computing, 34. pp. 217-235.

Ghosh, D. and Mitra, S.K. (2015) Plasma sprayed Cr3C2–Ni–Cr coating for oxidation protection of 2·25Cr–1Mo steel. Surface Engineering, 31 (5). pp. 342-348.

Inamuddin, Inamuddin and Jain, R.K. and Hussain, Sardar and Naushad, Mu. (2015) Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate zirconium(IV) phosphate (PEDOT:PSS–ZrP) composite ionomeric membrane for artificial muscle applications. RSC Advances, 5 (103). pp. 84526-84534.

Srivastava, Manish and Singh, Jay and Kuila, Tapas (2015) Recent advances in graphene and its metal-oxide hybrid nanostructures for lithium-ion batteries. Nanoscale, 7 (11). pp. 4820-4868.

Ghosh, Pritam and Roy, Biswajit and Mukhopadhyay, Subhra Kanti and Banerjee, Priyabrata (2015) Recognition of fluoride anions at low ppm level inside living cells and from fluorosis affected tooth and saliva samples. RSC Advances, 5 (35). pp. 27387-27392.

Kumar, M. Phani and Samanta, P. and Murmu, N.C. (2015) Rigid Rotor Stability Analysis on Finite Hydrostatic Double-Layer Porous Oil Journal Bearing with Velocity Slip. Tribology Transactions, 58. pp. 930-940.

Roy, Spandan and Nandy, Sambhunath and Ray, Ranjit and Vadali, Siva Ram Krishna and Shome, Sankar Nath (2015) Robust Diving and Composite Path Tracking Control of an Autonomous Underwater Vehicle. International Journal of Offshore and Polar Engineering, 25 (4). pp. 305-313. ISSN 1053-5381

Chatterjee, Debabrata and Jaiswal, Namita and Sarkar, Papiya (2015) Ru(EDTA) mediated partial reduction of O2 by H2S. Dalton Transactions, 44. pp. 7613-7617.

Mandal, Soumen and Arun, Ravi Kumar and Nagahanumaiah, Nagahanumaiah and Chanda, Nripen and Das, Surajit and Agarwal, Pankaj and Akhtar, Jamil and Mishra, Prabhash (2015) Silver Nanoparticles in Comparison with Ionic Liquid and rGO as Gate Dopant for Paper–Pencil-Based Flexible Field-Effect Transistors. Journal of Electronic Materials, 44 (1). pp. 6-12.

Samanta, Suprakash and Singh, Santosh and Sahoo, Rashmi. R. (2015) Simultaneous chemical reduction and surface functionalization of graphene oxide for efficient lubrication of steel–steel contact. RSC Advances, 5 (76). pp. 61888-61899.

Nath, Peuli and Arun, Ravi Kumar and Chanda, Nripen (2015) Smart gold nanosensor for easy sensing of lead and copper ions in solution and using paper strips. RSC Advances, 5 (84). pp. 69024-69031.

Kumar, Santosh and Das, Prosenjit and Tiwari, Sandeep K. and Mondal, Manas K. and Bera, Supriya and Roy, Himadri and Samanta, Sudip K. (2015) Study of Microstructure Evolution during Semi-Solid Processing of an In-Situ Al Alloy Composite. Materials and Manufacturing Processes, 30 (3). pp. 356-366.

Ghosh, Ranajit and Maruyama, Takahiro and Kondo, Hiroki and Kimoto, Koji and Nagai, Takuro and Iijima, Sumio (2015) Synthesis of single-walled carbon nanotubes on graphene layers. Chemical Communications, 51 (43). pp. 8974-8977.

Kumar, Deepak and Roy, Himadri and Show, Bijay Kumar (2015) Tribological Behavior of an Aluminum Matrix Composite with Al4SiC4 Reinforcement under Dry Sliding Condition. Tribology Transactions , 58 (3). pp. 518-526.

Murugan, Thangadurai and De, Sudipta and Thiagarajan, V. (2015) Validation of Three-Dimensional Simulation of Flow through Hypersonic Air-breathing Engine. Defence Science Journal, 65 (4). pp. 272-278.

Sengupta, D. and Mondal, B. and Mukherjee, K. (2015) Visible light absorption and photo-sensitizing properties of spinach leaves and beetroot extracted natural dyes. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 148. pp. 85-92.

Tiwari, Amritanjali and Mondal, Indranil and Pal, Ujjwal (2015) Visible light induced hydrogen production over thiophenothiazine-based dye sensitized TiO2 photocatalyst in neutral water. RSC Advances, 5 (40). pp. 31415-31421.

Das, Prosenjit and Show, Bijay K. and Rathore, Aakash and Samanta, Sudip K. (2015) Wear Behavior of Cooling Slope Rheocast A356 Al Alloy. Tribology Transactions, 58 (6). pp. 1054-1066.

Chatterjee, Debabrata and Jaiswal, Namita and Banerjee, Priyabrata (2014) Electrochemical Conversion of Bicarbonate to Formate Mediated by the Complex RuIII(edta) (edta4– = ethylenediaminetetraacetate). European Journal of Inorganic Chemistry, 2014 (34). pp. 5856-5859.

Chatterjee, Dipankar and Ray, Sudipta (2014) Influence of thermal buoyancy on boundary layer separation over a triangular surface. International Journal of Heat and Mass Transfer, 79. pp. 769-782.

Ray, Sudipta and Chatterjee, Dipankar (2014) MHD mixed convection in a lid-driven cavity including heat conducting circular solid object and corner heaters with Joule heating. International Communications in Heat and Mass Transfer, 57. pp. 200-207.

Datta, Sarbari and Patkar, Umesh S. and Majumder, Somajyoti (2014) Attitude Controller for Steady Hover of a Rotary-Wing Flying Robot. Journal of Intelligent & Robotic Systems, 75 (3). pp. 609-623.

Saha, Binod Kumar and Chattopadhyay, Himadri and Mandal, Pradipta Basu and Gangopadhyay, Tapas (2014) Dynamic simulation of a pressure regulating and shut-off valve. Computers & Fluids, 101. pp. 233-240.

Mukherjee, A. and Banerjee, M. and Basu, S. and Thanh, Nguyen Thi Kim and Green, L.A.W. and Pal, M. (2014) Enhanced magnetic and electrical properties of Y and Mn co-doped BiFeO3 nanoparticles. Physica B: Condensed Matter, 448. pp. 199-203.

Karunanithi, R. and Ghosh, D. and Ghosh, K.S. and Bera, Supriya (2014) Influence of particle size of the dispersoid on compressibility and sinterability of TiO2 dispersed Al 7075 alloy composites prepared by mechanical milling. Advanced Powder Technology, 25 (5). pp. 1500-1509.

Chatterjee , Dipankar (2014) Dual role of thermal buoyancy in controlling boundary layer separation around bluff obstacles. International Communications in Heat and Mass Transfer, 56. pp. 152-158.

Loha, Chanchal and Chattopadhyay, Himadri and Chatterjee, Pradip K. (2014) Effect of coefficient of restitution in Euler–Euler CFD simulation of fluidized-bed hydrodynamics. Particuology, 15. pp. 170-177.

Loveson, V.J. and Gujar, A.R. and Barnwal, R. and Khare, Richa and Rajamanickam, G.V. (2014) GPR studies over the tsunami affected Karaikal beach, Tamil Nadu, south India. Journal of Earth System Science, 123 (6). pp. 1375-1385.

Das, Subhra Kanti and Mazumdar, Chandan and Banerjee, Kumardeb (2014) GPU accelerated novel particle filtering method. Computing, 96 (8). pp. 749-773.

Chatterjee, Dipankar and Gupta, Satish Kumar and Mondal, Bittagopal (2014) Mixed convective transport in a lid-driven cavity containing a nanofluid and a rotating circular cylinder at the center. International Communications in Heat and Mass Transfer, 56. pp. 71-78.

Mandal, S. and Kumar, Arvind and Singh, R.K. and Ngachan, S.V. and Kundu, K. (2014) Drying, burning and emission characteristics of beehive charcoal briquettes: An alternative household fuel of Eastern Himalayan Region. Journal of Environmental Biology, 35. pp. 543-548. ISSN 0254-8704

Chatterjee, Dipankar and Sinha, Chiranjit (2014) Influence of Thermal Buoyancy on Vortex Shedding Behind a Rotating Circular Cylinder in Cross Flow at Subcritical Reynolds Numbers. Journal of Heat Transfer, 136. 051704 (1-10).

Ghosh, D. and Mitra, S.K. (2014) High-Temperature Corrosion Behavior in Different Regions of 9 Cr-1 Mo Steel Weldment in SO2 + O2 Atmosphere. Journal of Materials Engineering and Performance, 23 (5). pp. 1703-1710.

Chatterjee, Debabrata and Shome, Sanchari and Jaiswal, Namita and Moi, S.C. (2014) Mechanism of the oxidation of thiosulfate with hydrogen peroxide catalyzed by aqua-ethylenediaminetetraacetatoruthenium(III). Journal of Molecular Catalysis A: Chemical, 386. pp. 1-4.

Usha, K. and Mondal, B. and Sengupta, D. and Das, P. and Mukherjee, K. and Kumbhakar, P. (2014) Development of multilayered nanocrystalline TiO2 thin films for photovoltaic application. Optical Materials, 36 (6). pp. 1070-1075.

Singh, Satya Prakash and Chatterjee, Dipankar (2014) Impact of transverse shear on vortex induced vibrations of a circular cylinder at low Reynolds numbers. Computers & Fluids, 93. pp. 61-73.

Pallav, K. and Han, P. and Ramkumar, J. and Nagahanumaiah, Nagahanumaiah and Ehmann, K.F. (2014) Comparative Assessment of the Laser Induced Plasma Micromachining and the Micro-EDM Processes. Journal of Manufacturing Science and Engineering, 136. 011001 (1-16).

Shikha, Shikha and Das, S.K. and Pal, D. and Nandy, S. and Shome, S.N. and Banerjee, Soma (2014) Underwater terrain mapping with a 5-DOF AUV. Indian Journal of Geo-Marine Sciences, 43 (1). pp. 106-110.

Bhattacharya, Dibyendu (2014) pH-driven structure modulations in cobalt(II) coordination polymers constructed from 2,2 '-bipyridine-5,5 '-dicarboxylic acid. Indian Journal of Chemistry, 53A. pp. 46-51.

Khanra, Partha and Lee, Chang-No and Kuila, Tapas and Kim, Nam Hoon and Park, Min Jun and Lee, Joong Hee (2014) 7,7,8,8-Tetracyanoquinodimethane-assisted onestep electrochemical exfoliation of graphite and its performance as an electrode material. Nanoscale, 6. pp. 4864-4873. ISSN 2040-3364

Bhattacharya, Dibyendu (2014) A Luminescent Rhenium(I) Metallacycle with Oxygen and Nitrogen Donor Atoms: Photophysical and Theoretical Studies. Eur. J. Inorg. Chem. . pp. 2194-2199. ISSN 1099-0682

Nath, Peuli and Arun, Ravi Kumar and Chanda, Nripen (2014) A paper based microfluidic device for the detection of arsenic using a gold nanosensor†. RSC Adv., 4. 59558-–59561. ISSN 2046-2069

Arun, Ravi Kumar and Halder, Saurav and Chanda, Nripen and Chakraborty, Suman (2014) A paper based self-pumping and self-breathing fuel cell using pencil stroked graphite electrodes†. Lab on a Chip, 14. pp. 1661-1664. ISSN 1473-0197

Mistry, Kalyan Kumar and Layek, Keya and Mahapatra , Abhijit and Roy Chaudhuri, Chirasree and Saha, Hiranmay (2014) A review on amperometric-type immunosensors based on screen-printed electrodes. Analyst, 139. pp. 2289-2311. ISSN 0003-2654

Karmakar, M. and Das, P. and Pal, M. and Mondal, B. and Majumder, S.B. and Mukherjee, K. (2014) Acetone and ethanol sensing characteristics of magnesium zinc ferrite nano-particulate chemi-resistive sensor. J Mater Sci, 49. pp. 5766-5771.

Karmakar, M. and Mondal, B. and Pal, M. and Mukherjee, K. (2014) Acetone and ethanol sensing of barium hexaferrite particles: A case study considering the possibilities of non-conventional hexaferrite sensor. Sensors and Actuators B: Chemical, 190. pp. 627-633. ISSN 0925-4005

Maji, Palash Kumar and Banerjee, Amit Jyoti and Banerjee, Partha Sarathi and Karmakar, Sankar (2014) Additive manufacturing in prosthesis development – a case study. Rapid Prototyping Journal, 20 (6). pp. 480-489. ISSN 1355-2546

Loha, Chanchal and Gu, Sai and Wilde, Juray De and Mahanta, Pinakeswar and Chatterjee, Pradip K. (2014) Advances in mathematical modeling of fluidized bed gasification. Renewable and Sustainable Energy Reviews, 40. pp. 688-715. ISSN 1364-0321

Mukherjee, Suprabhat and Mandal, Nilrudra and Dey, Apurba and Mondal, Biswanath (2014) An approach towards optimization of the extraction of polyphenolic antioxidants from ginger (Zingiber officinale). Journal of Food Science and Technology, 51 (11). pp. 3301-3308. ISSN 0022-1155

Hens, Abhiram and Biswas, Gautam and De, Sudipta (2014) Analysis of interfacial instability and multimode bubble formation in saturated boiling using coupled level set and volume-of-fluid approach. Physics of Fluids, 26. 012105 (1-14). ISSN 1070-6631

Mandal, Soumen and Nagahanumaiah, Nagahanumaiah (2014) Assessment of thermally induced shear stress and its effect on pattern waviness in CO2 laser ablation of birefringent polymers. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 228 (2). pp. 97-103.

Debbarma, Swarup R. and Saha, Showmen (2014) Behaviour of Concrete Beams reinforced with SMA and steel bars under cyclic and monotonic load. Magazine of Concrete Research, 66 (6). pp. 305-314.

Jain, R.K. and Datta, S. and Majumder, S. (2014) Bio-mimetic behavior of IPMC using EMG signal for a micro robot. Mechanics Based Design of Structures and Machines, 42. pp. 398-417. ISSN 1539-7734

Jana, Milan and Saha, Sanjit and Khanra, Partha and Murmu, Naresh Chandra and Srivastava, Suneel Kumar and Kuila, Tapas and Lee, Joong Hee (2014) Bio-reduction of graphene oxide using drained water from soakedmung beans (Phaseolus aureus L.) and its application as energy storageelectrode material. Materials Science and Engineering B, 186. pp. 33-40. ISSN 0921-5107

Dutta, Samik and Barat, Kaustav and Das, Arpan and Das, Swapan Kumar and Shukla, A.K. and Roy, Himadri (2014) Characterization of micrographs and fractographs of Cu-strengthened HSLA steel using image texture analysis. Measurement, 47. pp. 130-144. ISSN 0263-2241

Jana, Milan and Khanra, Partha and Murmu, Naresh Chandra and Samanta, Pranab and Lee, Joong Hee and Kuila, Tapas (2014) Covalent surface modification of chemically derived graphene and its application as supercapacitor electrode material. Phys. Chem. Chem. Phys., 16. pp. 7618-7626.

Ghosh, Pritam and Roychowdhury, Additi and Corbella, Montserrat and Bhaumik, Asim and Mitra, Partha and Mobin, Shaikh M. and Mukherjee, Ayan and Basu, Soumen and Banerjee, Priyabrata (2014) Designed synthesis of CO2-promoted copper(II) coordination polymers: synthesis, structural and spectroscopic characterization, and studies of versatile functional properties. Dalton Transactions, 43. pp. 13500-13508.

Mondal, Biswanath and Mandal, Nilrudra and Doloi, Biswanath (2014) Development of Ce-PSZ-/Y-PSZ-Toughened Alumina Inserts for High-Speed Machining Steel. International Journal of Applied Ceramic Technology, 11 (2). pp. 228-239.

Jain, R.K. and Datta, S. and Majumder, S. and Dutta, A. (2014) Development of Multi Micro Manipulation System Using IPMC Micro Grippers. Journal of Intelligent & Robotic Systems, 74. pp. 547-569.

Chatterjee, Debabrata and Moulik, Swapan Kumar and Lingamallu, Giribabu and Kanaparthi, Ravi Kumar (2014) Dye sensitization of a large band gap semiconductor by an iron(III) complex. Transition Metal Chemistry, 39 (6). pp. 641-646.

Paunikar, Shweta and Kumar, Surendra (2014) Effect of CNT waviness on the effective mechanical properties of long and short CNT reinforced composites. Computational Materials Science, 95. pp. 21-28. ISSN 0927-0256

Sahoo, R.R. and Biswas, S.K. (2014) Effect of Layered MoS2 Nanoparticles on the Frictional Behavior and Microstructure of Lubricating Greases. Tribology Letters, 53. pp. 157-171.

Yan, Yinan and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2014) Effects of acid vapour mediated oxidization on the electrochemical performance of thermally exfoliated graphene. Carbon, 74. pp. 195-206. ISSN 0008-6223

Jiang, Tongwu and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2014) Effects of surface-modified silica nanoparticles attached graphene oxide using isocyanateterminated flexible polymer chains on the mechanical properties of epoxy composites. Journal of Materials Chemistry A, 2. pp. 10557-10567.

Kim, Nam Hoon and Kuila, Tapas and Lee, Joong Hee (2014) Enhanced mechanical properties of a multiwall carbon nanotube attached pre-stitched graphene oxide filled linear low density polyethylene composite. Journal of Materials Chemistry A, 2. pp. 2681-2689.

Yu, Dong Sheng and Kuila, Tapas and Kim, Nam Hoon and Lee, Joong Hee (2014) Enhanced properties of aryl diazonium salt-functionalized graphene/poly(vinyl alcohol) composites. Chemical Engineering Journal, 245. pp. 311-322. ISSN 1385-8947

Mukherjee, A. and Basu, S. and Manna, P.K. and Yusuf, S.M. and Pal, M. (2014) Enhancement of multiferroic properties of nanocrystalline BiFeO3 powder by Gd-doping. Journal of Alloys and Compounds, 598. pp. 142-150. ISSN 0925-8388

RoyChowdhury, Additi and Ghosh, Pritam and Saha, Sourav Kr. and Mitra, Partha and Banerjee, Priyabrata (2014) Exploratory studies towards various anion recognition chemistry by two different sized cleft shaped organic ligands. Spectrochimica Acta Part A: Molecular and, 124. pp. 492-499. ISSN 1386-1425

Das, P. and Mondal, B. and Mukherjee, K. (2014) Facile synthesis of pseudo-peanut shaped hematite iron oxide nano-particles and their promising ethanol and formaldehyde sensing characteristics. RSC Advances, 4. pp. 31879-31886.

Saha, Atanu and Roy, H. and Shukla, A.K. (2014) Failure of a pendent reheater tube in a 110 MW thermal power plant. High Temperature Materials and Processes, 33. pp. 299-304.

Roy, U. and Roy, H. and Daoud, H. and Glatzel, U. and Ray, K.K. (2014) Fracture toughness and fracture micromechanism in a cast AlCoCrCuFeNi high entropy alloys ystem. MaterialsLetters, 132. pp. 186-189. ISSN 0167-577X

Barat, K. and Bar, H.N. and Mandal, D. and Roy, H. and Sivaprasad, S, and Tarafder, S. (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science & Engineering A, 597. pp. 37-45. ISSN 0921-5093

Ray, Sudipta and Chatterjee, Dipankar (2014) MHD Mixed Convection in a Lid-Driven Cavity Including Heat Conducting Solid Object and Corner Heaters with Joule Heating. Numerical Heat Transfer, Part A, 66. pp. 530-550. ISSN 1040-7782

Chatterjee, Dipankar and Halder, Pabitra (2014) MHD Mixed Convective Transport in Square Enclosure with Two Rotating Circular Cylinders. Numerical Heat Transfer, Part A, 65. pp. 802-824. ISSN 1040-7782

Sengupta, D. and Das, P. and Kasinadhuni, U. and Mondal, B. and Mukherjee, K. (2014) Morphology induced light scattering by zinc oxide polydisperse particles: Promising for dye sensitized solar cell application. Journal of Renewable and Sustainable Emergy , 6. 063114 (1-10).

Hens, Abhiram and Agarwal, Rahul and Biswas, Gautam (2014) Nanoscale study of boiling and evaporation in a liquid Ar film on a Pt heater using molecular dynamics simulation. International Journal of Heat and Mass Transfer, 71. pp. 303-312. ISSN 0017-9310

Mondal, B. and Mandal, N. and Mondal, S. and Mukherjee, K. and Mukhopadhyay, S. and Dey, A. (2014) Optimisation of process parameters for fabrication of nanocrystalline TiO2–hydoxyapatite based scaffold using response surface methodology. Advances in Applied Ceramics, 113 (3). pp. 129-138.

Das, Prosenjit and Samanta, Sudip K. and Das, Reeta and Dutta, Pradip (2014) Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis. Measurement, 55. pp. 605-615. ISSN 0263-2241

Datta, U. and Kundu, S. (2014) Performance of Multi Hop CDMA Wireless Sensor Networks with Nearest Neighbors Based Routing. International Journal of Sensor Networks, 15 (1). pp. 40-51.

Das, Prosenjit and Samanta, Sudip Kumar and Kumar, Pramod and Dutta, Pradip (2014) Phase Field Simulation of Equiaxed Microstructure Formation during Semi-solid Processing of A380 Al Alloy. ISIJ International, 54 (7). pp. 1601-1610.

Mondal, S. and Mondal, A. and Mandal, N. and Mondal, B. and Mukhopadhyay, S.S. and Dey, A. and Singh, S. (2014) Physico-chemical characterization and biological response of Labeo rohita-derived hydroxyapatite scaffold. Bioprocess and Biosystems Engineering, 37. pp. 1233-1240.

Sharma, Pankaj and Roy, Himadri (2014) Pitting corrosion failure of an AISI stainless steel pointer rod. Engineering Failure Analysis, 44. pp. 400-407. ISSN 1350-6307

Hasan, Anwarul and Nurunnabi, Md and Morshed, Mahboob and Paul, Arghya and Polini, Alessandro and Kuila, Tapas and Hariri, Moustafa Al and Lee, Yong-Kyu and Jaffa , Ayad A. (2014) Recent Advances in Application of Biosensors in Tissue Engineering. Biomed Research International, 2014. 307519 (1-18).

Dora, C.L. and Murugan, T. and De, S. and Das, Debopam (2014) Role of slipstream instability in formation of counter-rotating vortex rings ahead of a compressible vortex ring. Journal of Fluid Mechanics, 753. pp. 29-48.

Das, Prosenjit and Kumar, Manish and Samanta, Sudip K. and Dutta, Pradip and Ghosh, Debashis (2014) Semisolid Processing of A380 Al Alloy Using Cooling Slope. Materials and Manufacturing Processes, 29. pp. 422-428. ISSN 1042-6914

Zhang, Hang and Kuila, Tapas and Kim, Nam Hoon and Yu, Dong Sheng and Lee, Joong Hee (2014) Simultaneous reduction, exfoliation, and nitrogen doping of graphene oxide via a hydrothermal reaction for energy storage electrode materials. Carbon, 69. pp. 66-78. ISSN 0008-6223

Bala, Sukhen and Mondal, Indranil and Goswami, Arijit and Pal, Ujjwal and Mondal, Raju (2014) Synthesis, crystal structure and optical properties of a naphthylbisimide-Ni complex: a framework on TiO2 for visible light H2 production. Dalton Transactions, 43. pp. 15704-15707.

Ruj, Biswajit and Ghosh, Subhajyoti (2014) Technological aspects for thermal plasma treatment of municipal solid waste—A review. Fuel Processing Technology, 126. pp. 298-308. ISSN 0378-3820

Loha, Chanchal and Chattopadhyay, Himadri and Chatterjee, Pradip K. (2014) Three dimensional kinetic modeling of fluidized bed biomass gasification. Chemical Engineering Science, 109. pp. 53-64. ISSN 0009-2509

Arun, Ravi Kumar and Chaudhury, Kaustav and Ghosh, Moumita and Biswas, Gautam and Chanda , Nripen and Chakraborty, Suman (2014) Controlled splitting and focusing of a stream of nanoparticles in a converging–diverging microchannel. Lab on a Chip, 14 (19). pp. 3800-3808.

Chatterjee, Debabrata and Jaiswal, Namita and Franke, Alicja and Eldik, Rudi van (2014) Direct evidence for catalase activity of [RuV(edta)(O)]−. Chemical Communications, 50 (93). pp. 14562-14565.

Nandi, Arup Kumar (2014) GA-fuzzy based estimation of equivalent hardness of particle reinforced flexible mould material composites. Journal of Intelligent & Fuzzy Systems, 26 (6). pp. 2671-2683.

Mukherjee, Ayan and Basu, Soumen and Manna, P.K. and Yusuf, S.M. and Pal, Mrinal (2014) Giant magnetodielectric and enhanced multiferroic properties of Sm doped bismuth ferrite nanoparticles. Journal of Materials Chemistry C, 2 (29). pp. 5885-5891.

Ghosh, Debasish and Mukherjee, S. and Das, S. (2014) High temperature oxidation behaviour of yttria (Y2O3) coated low alloy steel. Surface Engineering , 30 (7). pp. 524-528.

Chatterjee, Dipankar and Gupta, Satish Kumar (2014) Hydromagnetic Mixed Convective Transport in a Nonisothermally Heated Lid-Driven Square Enclosure Including a Heat-Conducting Circular Cylinder. Industrial and Engineering Chemistry Research, 53 (51). pp. 19775-19787.

Chatterjee, Dipankar and Mondal, Bittagopal and Halder, Pabitra (2014) Hydromagnetic mixed convective transport in a vertical lid-driven cavity including a heat conducting rotating circular cylinder. Numerical Heat Transfer, Part A: Applications, 65 (1). pp. 48-65.

Saha, Sanjit and Jana, Milan and Samanta, Pranab and Murmu, Naresh Chandra and Kim, Nam Hoon and Kuila, Tapas and Lee, Joong Hee (2014) Hydrothermal synthesis of Fe3O4/RGO composites and investigation of electrochemical performances for energy storage applications. RSC Advances, 4 (84). pp. 44777-44785.

Das, S. and Bhattacharya, A. and Ganguly, A. and Gu, Sai and Chatterjee, P.K. (2014) Kinetics and genetic algorithm study of acid catalysed hydrolysis of water hyacinth biomass. Journal of Renewable and Sustainable Energy, 6. 063115.

Chatterjee, Debabrata and Shome, Sanchari and Jaiswal, Namita and Banerjee, Priyabrata (2014) Nitrite reduction mediated by the complex RuIII(EDTA). Dalton Transactions, 43 (36). pp. 13596-13600.

Chatterjee, Debabrata and Franke, Alicja and Oszajca, Maria and Eldik, Rudi van (2014) RuIII(edta) mediated oxidation of azide in the presence of hydrogen peroxide. Azide versus peroxide activation. Dalton Transactions, 43 (8). pp. 3087-3094.

Chatterjee, D. and Jaiswal, N. and Schmeisser, M. and van Eldik, R. (2014) Ru(III)(EDTA) mediated S-nitrosylation of cysteine by nitrite. Dalton Transactions, 43 (48). pp. 18042-18046.

Biswas, G. (2013) Variant of a volume-of-fluid method for surface tension-dominant two-phase flows. Sadhana, 38 (6). pp. 1127-1133.

Rajasekar, Rathanasamy and Kim, Nam Hoon and Jung, Daeseung and Kuila, Tapas and Lim, Jae Kyoo and Park, Min Jeong and Lee, Joong Hee (2013) Electrostatically assembled layer-by-layer composites containing graphene oxide for enhanced hydrogen gas barrier application. Composites Science and Technology, 89. pp. 167-174.

Chatterjee, Dipankar (2013) Lattice kinetic simulation of buoyancy induced MHD flows. International Journal of Heat and Mass Transfer, 65. pp. 533-544.

Chatterjee, Anjali and Sarkar, Rajat and Roy, Nirmal K. and Kumbhakar, P. (2013) On Line Monitoring of Transformers using Gas Sensor Fabricated by Nanotechnology. International Transactions on Electrical Energy Systems, 23 (6). pp. 867-875.

Singh, S.P. and Biswas, G. (2013) Vortex induced vibrations of a square cylinder at subcritical Reynolds numbers. Journal of Fluids and Structures, 41. pp. 146-155.

Ghosh, Swati and Haldar, S. and Ganguly, A. and Chatterjee, P.K. (2013) Investigations on the kinetics and thermodynamics of dilute acid hydrolysis of Parthenium hysterophorus L. substrate. Chemical Engineering Journal, 229. pp. 111-117.

Ganguly, Amit and Das, Subhabrata and Bhattacharya, Anamica and Dey, Apurba and Chatterjee, Pradip Kumar (2013) Enzymatic hydrolysis od water hyacinth biomass for the production of ethanol: Optimization of driving parameters. Indian Journal of Experimental Biology, 51. pp. 556-566. ISSN 0019-5189

Paul, P.K. and Hussain, S.A. and Bhattacharjee, D. and Pal, M. (2013) Preparation of polystyrene–clay nanocomposite by solution intercalation technique. Bulletin of Materials Science, 36 (3). pp. 361-366.

Swati, Ghosh and Haldar, S. and Ganguly, A. and Chatterjee, P.K. (2013) Review on Parthenium hysterphorus as a potential energy source. Renewable and Sustainable Energy Reviews, 20. pp. 420-429.

Paul, G. and Roy, S. and Sarkar, S. and Hanumaiah, Naga and Mitra, S. (2013) Investigations on influence of process variables on crater dimensions in micro-EDM of γ-titanium aluminide alloy in dry and oil dielectric media. The International Journal of Advanced Manufacturing Technology, 65 (5). pp. 1009-1017. ISSN 0268-3768

Mukherjee, Suprabhat and Basak, Bikram and Bhunia, Biswanath and Dey, Apurba and Mondal, Biswanath (2013) Potential use of polyphenol oxidases (PPO) in the bioremediation of phenolic contaminants containing industrial wastewater. Reviews in Environmental Science and Bio/Technology, 12 (1). pp. 61-73.

Dasgupta, Ranjan Kumar and Mondal, Dipak Kumar and Chakrabarti, Ajit Kumar (2013) Evolution of Microstructures During Austempering of Ductile Irons Alloyed with Manganese and Copper. Metallurgical and Materials Transactions A, 44 (3). pp. 1376-1387.

Chakraborty, I. and Biswas, G. and Ghoshdastidar, P.S. (2013) A coupled level-set and volume-of-fluid method for the buoyant rise of gas bubbles in liquids. International Journal of Heat and Mass Transfer, 58. pp. 240-259. ISSN 0017-9310

Samanta, S.K. and Das, Prosenjit and Lohar, A.K. and Roy, H. and Kumar, S. and Chowdhury, A.K. (2013) A novel approach of manufacturing Nickel Wicks for loop heat pipes using Metal Injection Moulding (MIM). Sadhana, 38 (2). pp. 281-296.

Singh, Satya Prakash and Biswas, Gautam and Nithiarasu, Perumal (2013) A numerical study of vortex shedding from a circular cylinder vibrating in the in-line direction. International Journal of Numerical Methods For Heat & Fluid Flow, 23 (8). pp. 1449-1462. ISSN 0961-5539

Murugan, T. and De, S. and Dora, C.L. and Das, D. and Kumar, P. Prem (2013) A study of the counter rotating vortex rings interacting with the primary vortex ring in shock tube generated flows. Fluid Dynamics Research, 45. 025506 (1-20).

Choudhury, Biplab and Saha, Bidyut Baran and Chatterjee, Pradip K. and Sarkar, Jyoti Prakas (2013) An overview of developments in adsorption refrigeration systems towards a sustainable way of cooling. Applied Energy, 104. pp. 554-567. ISSN 0306-2619

Chatterjee, Abhijit and Das, Debashis (2013) Assessing Flow Response of Self-compacting Mortar by Taguchi Method and ANOVA Interaction. Materials Research, 16 (5). pp. 1084-1091. ISSN 1516-1439

Mandal, Soumen and Kumar, Anirudh and Nagahanumaiah, Nagahanumaiah (2013) Assessment of micro turning machine stiffness response and material characteristics by fuzzy rule based pattern matching of cutting force plots. Journal of Manufacturing Systems, 32. pp. 228-237. ISSN 0278-6125

Dutta, S. and Kanwat, A. and Pal, S.K. and Sen, R. (2013) Correlation study of tool flank wear with machined surface texture in end milling. Measurement, 46. pp. 4249-4260. ISSN 0263-2241

Jain, R.K. and Datta, S. and Majumder, S. (2013) Design and control of an IPMC artificial muscle finger for micro gripper using EMG signal. Mechatronics, 23. pp. 381-394. ISSN 0957-4158

Ghosh, D. and Shukla, A.K. and Mitra, S.K. (2013) Effect of ceria coating on corrosion behaviour of low alloy steel. Surface Engineering, 29 (8). pp. 584-587.

Karmakar, M. and Mondal, O. and Roy, B. and Paul, P.K. and Pal, M. (2013) Effect of Mn Doping on Microstructure and Optical Propertiesof Nanocrystalline ZnO. NANO: Brief Reports and Reviews, 8 (6). 1350058 (1-7).

Hossain, Sk Mazaffar and Mukherjee, Ayan and Basu, Soumen and Pal, Mrinal (2013) Effect of Ni–Co codoping on structure and electrical properties of multiferroic BiFeO3 nanoparticles. Micro & Nano Letters, 8 (7). pp. 374-377.

Sinha, Anupam and Raman, K. Ashoke and Chattopadhyay, Himadri and Biswas, Gautam (2013) Effects of different orientations of winglet arrays on the performance of plate-fin heat exchangers. International Journal of Heat and Mass Transfer, 57. pp. 202-214. ISSN 0017-9310

Lee, Joong Hee and Lee, Jin-Sun and Kuila, Tapas and Kim, Nam Hoon and Jung, Daeseung (2013) Effects of hybrid carbon fillers of polymer composite bipolar plates on the performance of direct methanol fuel cells. Composites: Part B, 51. pp. 98-105. ISSN 1359-8368

Yan, Yinan and Kuila, Tapas and Kim, Nam Hoon Kim and Ku, Bon-Cheol and Lee, Joong Hee (2013) Effects of reduction and polystyrene sulfate functionalization on the capacitive behaviour of thermally exfoliated graphene. Journal of Materials Chemistry A, 1. pp. 5892-5901.

Kuila, Tapas and Khanra, Partha and Kim, Nam Hoon and Lim, Jae Kyoo and Lee, Joong Hee (2013) Effects of sodium hydroxide on the yield and electrochemical performance of sulfonated poly(ether-ether-ketone) functionalized graphene. Journal of Materials Chemistry A, 1. pp. 9294-9302.

Uddin, Md. Elias and Kuila, Tapas and Nayak, Ganesh Chandra and Kim, Nam Hoon and Ku, Bon-Cheol and Lee, Joong Hee (2013) Effects of various surfactants on the dispersion stability and electrical conductivity of surface modified graphene. Journal of Alloys and Compounds, 562. pp. 134-142. ISSN 0925-8388

Loha, Chanchal and Chattopadhyay, Himadri and Chatterjee, Pradip K. (2013) Energy generation from fluidized bed gasification of rice husk. Journal of Renewable and Sustainable Energy, 5. 043111 (1-10). ISSN 1941-7012

Jiang, Tongwu and Kuila, Tapas and Kim, Nam Hoon and Ku, Bon-Cheol and Lee, Joong Hee (2013) Enhanced mechanical properties of silanized silica nanoparticle attached graphene oxide/epoxy composites. Composites Science and Technology, 79. pp. 115-125. ISSN 0266-3538

Loha, Chanchal and Chattopadhyay, Himadri and Chatterjee, Pradip K. (2013) Euler-Euler CFD modeling of fluidized bed: Influence of specularity coefficient on hydrodynamic behavior. Particuology, 11. pp. 673-680. ISSN 1674-2001

Das, P. and Samanta, S.K. and Chattopadhyay, H. and Sharma, B.B. and Dutta, P. (2013) Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope. Materials Science and Technology, 29 (1). pp. 83-92.

Das, Prosenjit and Dutta, Samik and Samanta, Sudip K (2013) Evaluation of primary phase morphology of cooling slope cast Al-Si-Mg alloy samples using image texture analysis. Proceeding of Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 227 (10). pp. 1474-1483.

Debbarma, Swarup Ranjan and Saha, Showmen (2013) Experimental study on growth of time-dependent strain in SMA reinforced PSC beams. Magazine of Concrete Research, 65 (1). pp. 1003-1009.

Shukla, A.K. and Das, P. and Dutta, S. and Ray, S. and Roy, H. (2013) Failure analysis of a head gear pulley used in coal mines. Engineering Failure Analysis, 31. pp. 48-58. ISSN 1350-6307

Mandal, Soumen and Mishra, Vinod and Tiwari, Umesh and Nagahanumaiah, Nagahanumaiah and Sarepaka, Rama Gopal (2013) Fiber Bragg Grating Sensor for Temperature Measurement in Micro Turning of Optical Surfaces with High Surface Integrity. International Journal of Optomechatronics, 7. pp. 244-252. ISSN 1559-9612

Nandi, A.K. and Deb, K. and Datta, S. (2013) Genetic Algorithm–Based Design and Development of Particle-Reinforced Silicone Rubber for Soft Tooling Process. Materials and Manufacturing Processes, 28. pp. 753-760. ISSN 1042-6914

Mondal, Oindrila and Thanh, Nguyen and Green, Luke Aw and Pal, Mrinal (2013) Improved and Unusual Magnetic Properties of ZnO Nanorings. Functional Materials Letters, 6 (4). 1350049 (1-4).

Karmakar, M.K. and Mandal, J. and Haldar, S. and Chatterjee, P.K. (2013) Investigation of fuel gas generation in a pilot scale fluidized bed autothermal gasifier using rice husk. Fuel, 111. pp. 584-591. ISSN 0016-2361

Maity, Joydeep and Saha, Atanu and Mondal, Dipak Kumar and Biswas, Koushik (2013) Mechanism of accelerated spheroidization of steel during cyclic heat treatment around the upper critical temperature. Philosophical Magazine Letters, 93 (4). pp. 231-237.

Chatterjee, Dipankar (2013) MHD Mixed Convection in a Lid-Driven Cavity Including a Heated Source. Numerical Heat Transfer, Part A, 64. pp. 235-254. ISSN 1040-7782

Maji, Palash Kumar and Roychowdhury, Amit and Datta, Debasis (2013) Minimizing Stress Shielding Effect of Femoral Stem—A Review. Journal of Medical Imaging and Health Informatics, 3. pp. 1-8. ISSN 2156-7018

Chatterjee, Dipankar and Mondal, Bittagopal (2013) Mixed Convection Heat Transfer from Tandem Square Cylinders for Various Gap to Size Ratios. Numerical Heat Transfer, Part A, 63. pp. 101-119. ISSN 1040-7782

Chatterjee, Dipankar and Raja, Mohammad (2013) Mixed Convection Heat Transfer Past In-Line Square Cylinders in a Vertical Duct. Thermal Science , 17 (2). pp. 567-580.

Thiruvengadathan, Rajagopalan and Korampally, Venumadhav and Ghosh, Arkasubhra and Chanda, Nripen and Gangopadhyay, Keshab and Gangopadhyay, Shubhra (2013) Nanomaterial processing using self-assembly-bottom-up chemical and biological approaches. Reports on Progress in Physics, 76. 066501 (1-54). ISSN 0034-4885

Chakraborty, Suman and Chatterjee, Dipankar and Bakli, Chirodeep (2013) Nonlinear Amplification in Electrokinetic Pumping in Nanochannels in the Presence of Hydrophobic Interactions. Physical Review Letters , 110. 184503 (1-5). ISSN 0031-9007

Halder, P. and De, S. and Sinhamahapatra, K.P. and Singh, N. (2013) Numerical simulation of shock–vortex interaction in Schardin’s problem. Shock Waves, 23. pp. 495-504.

Kuila, Tapas and Khanra, Partha and Kim, Nam Hoon and Choi, Sung Kuk and Yun, Hyung Joong and Lee, Joong Hee (2013) One-step electrochemical synthesis of 6-amino-4-hydroxy-2-napthalene-sulfonic acid functionalized graphene for green energy storage electrode materials. Nanotechnology , 24. 365706 (1-10).

Mandal, Nilrudra and Doloi, B. and Mondal, B. (2013) Predictive modeling of surface roughness in high speed machining of AISI 4340 steel using yttria stabilized zirconia toughened alumina turning insert. Int. Journal of Refractory Metals and Hard Materials, 38. pp. 40-46. ISSN 0263-4368

Datta, A. and Dutta, S. and Pal, S.K. and Sen, R. (2013) Progressive cutting tool wear detection from machined surface images using Voronoi tessellation method. Journal of Materials Processing Technology, 213. pp. 2339-2349. ISSN 0924-0136

Jain, R.K. and Majumder, S. and Dutta, A. (2013) SCARA based peg-in-hole assembly using compliant IPMC micro gripper. Robotics and Autonomous Systems, 61. pp. 297-311. ISSN 0921-8890

Arun, Ravi K. and Bekele, Wasihun and Ghatak, Animangsu (2013) Self oscillating potential generated in patterned micro-fluidic fuel cell. Electrochimica Acta, 87. pp. 489-496. ISSN 0013-4686

Hens, Abhiram and Mondal, Kartick and Bandyopadhyay, Dipankar (2013) Self-organized pathways to nanopatterns exploiting the instabilities of ultrathin confined bilayers. Physical Review E, 87. 022405 (1-15). ISSN 1539-3755

Roy, H. and Ray, A. and Barat, K. and Hochmuth, C. and Sivaprasad, S. and Tarafder, S. and Glatzel, U. and Ray, K.K. (2013) Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steel. Materials Science & Engineering A, 561. pp. 88-99. ISSN 0921-5093

Samanta, S.K. and Das, P. and Lohar, A.K. (2013) Study of physical characteristics of nickel wicks developed by metal injection moulding. Powder Metallurgy, 56 (3). pp. 221-230. ISSN 0032-5899

Habib, Khairul and Choudhury, Biplab and Chatterjee, Pradip Kumar and Saha, Bidyut Baran (2013) Study on a solar heat driven dual-mode adsorption chiller. Energy, 63. pp. 133-141. ISSN 0360-5442

Mondal, O. and Datta, A. and Chakravorty, D. and Pal, M. (2013) Ultrafine narrow dispersed copper nanoparticles synthesized by a facile chemical reduction method. MRS Communications, 3. pp. 91-95.

Chatterjee, Dipankar and Mondal, Bittagopal and Halder, Pabitra (2013) Unsteady Forced Convection Heat Transfer Over a Semicircular Cylinder at Low Reynolds Numbers. Numerical Heat Transfer, Part A, 63. pp. 411-429. ISSN 1040-7782

Chatterjee, Dipankar and Mondal, Bittagopal (2013) Unsteady mixed convection heat transfer from tandem square cylinders in cross flow at low Reynolds numbers. Heat Mass Transfer, 49. pp. 907-920.

Mondal, Oindrila and Pal, Mrinal (2013) Unusual and strong emission in visible region from Mn2+ and Y3+ doped ZnO nanocrystals. Optical Materials, 35. pp. 1520-1525. ISSN 0925-3467

Chatterjee, Anjali and Bhattacharjee, Partha and Roy, N.K. and Kumbhakar, P. (2013) Usage of nanotechnology based gas sensor for health assessment and maintenance of transformers by DGA method. Electrical Power and Energy Systems, 45. pp. 137-141. ISSN 0142-0615

Nandi, Arup Kumar and Deb, Kalyanmoy and Datta, Shubhabrata and Orkas, Juhani (2013) A genetic fuzzy based modeling of effective thermal conductivity for polymer composites. Journal of Intelligent & Fuzzy Systems, 25 (2). pp. 259-270.

Shome, S.N. and Nandy, S. and Das, S.K. and Pal, D. (2013) An approach towards the design and development of a flexible 5dof AUV. Indian Journal of Geo-marine Sciences, 42 (5). pp. 565-572.

Chatterjee, Debabrata and K, Jagadessh C. Bose and Mukhopadhyay, Sudit (2013) Binding of aquo-ethylenediaminetetraacetatoruthenium(III) to apo-transferrin. Fluorescence, antiproliferative and in silico studies. Inorganica Chimica Acta, 404. pp. 1-4.

Pandey, Prasenjit and Chakraborty, Tanmoy and Mukherjee, Asok K. (2013) Bulk-phase thermodynamic properties and dielectric constant of ethanol: an ab initio quantum mechanical approach combined with a statistical model. Molecular Physics, 111 (20). pp. 3098-3103.

Singh, Manjeet and Ghanshyam, C. and Mishra, Pramod Kumar and Chak, Rajesh (2013) Current Status of Electrostatic Spraying Technology for Efficient Crop Protection. AMA-Agricultural Mechanization in Asia Africa and Latin America, 44 (2). pp. 46-53.

Kim, Nam Hoon and Khanra, Partha and Kuila, Tapas and Jung, Daeseung and Lee, Joong Hee (2013) Efficient reduction of graphene oxide using Tin-powder and its electrochemical performances for use as an energy storage electrode material. Journal of Materials Chemistry A, 1 (37). pp. 11320-11328.

Mukherjee, A. and Banerjee, M. and Basu, S. and Nambissan, P.M.G. and Pal, M. (2013) Gadolinium substitution induced defect restructuring in multiferroic BiFeO3: case study by positron annihilation spectroscopy. Journal of Physics D: Applied Physics, 46 (49). p. 495309.

Ghosh, D. and Shukla, A.K. and Mitra, S.K. (2013) Influence of CeO2 superficial coating on the high temperature corrosion behavior of 2.25 Cr-1 Mo Steel in SO2 + O2 atmospheres. Protection of Metals and Physical Chemistry of Surfaces, 49 (6). pp. 749-752.

Chebolu, Aneissha and Laha, Bhakti and Ghosh, Monidipa and Nagahanumaiah, Nagahanumaiah (2013) Investigation on bacterial adhesion and colonisation resistance over laser-machined micro patterned surfaces. Micro & Nano Letters, 8 (6). pp. 280-283.

Chatterjee, Dipankar and Halder, Pabitra and Mondal, Sinchan and Bhattacharjee, Supratim (2013) Magnetoconvective transport in a vertical lid-driven cavity including a heat conducting square cylinder with Joule heating. Numerical Heat Transfer, Part A, 64. pp. 1050-1071. ISSN 1040-7782

Basak, Bikram and Bhunia, Biswanath and Mukherjee, Suprabhat and Dey, Apurba (2013) Optimization of physicochemical parameters for phenol biodegradation by Candida tropicalis PHB5 using Taguchi Methodology. Desalination and Water Treatment, 51 (34-36). pp. 6846-6862.

Chatterjee, Debabrata and Paul, Barnali and Mukherjee, Rupa (2013) Oxidation of thiocyanate with H2O2 catalyzed by [Ru(III)(edta)(H2O)](-). Dalton Transactions, 42 (27). pp. 10056-10060.

Kumar, Sumit and Ikkurti, H.P. (2013) Power Electronic Interface for Energy Management in Battery Ultracapacitor Hybrid Energy Storage System. Electric Power Components and Systems, 4. pp. 1059-1074. ISSN 1532-5008

Singh, Jay and Khanra, Partha and Kuila, Tapas and Srivastava, Manish and Das, Ashok K. and Kim, Nam Hoon and Jung, Bong Joo and Kim, Da Yeong and Lee, Seung Hee and Lee, Dong Won and Kim, Dae-Ghon and Lee, Joong Hee (2013) Preparation of sulfonated poly(ether–ether–ketone) functionalized ternary graphene/AuNPs/chitosan nanocomposite for efficient glucose biosensor. Process Biochemistry, 48 (11). pp. 1724-1735.

Chatterjee, Debabrata and Rothbart, Sabine and Eldik, Rudi van (2013) Selective oxidation of thiourea with H2O2 catalyzed by [RuIII(edta)(H2O)]−: kinetic and mechanistic studies. Dalton Transactions, 42 (13). pp. 4725-4729.

Chatterjee, Debabrata and Rothbart, Sabine and Eldik, Rudi van (2013) Substrate versus oxidant activation in RuIII(edta) catalyzed dye degradation. RSC Advances, 3 (11). pp. 3606-3610.

Bhattacharya, Dibyendu (2013) Synthesis, characterization, structure and dual room-temperature fluorescent and phosphorescent emission in μ-oxalato-bridged rhenium(I) metallacycle. Inorganic Chemistry Communications, 36. pp. 159-162.

Das, Prosenjit and Samanta, Sudip. K. and Venkatpathi, B. R. K. and Chattopadhyay, Himadri and Dutta, Pradip (2012) Microstructural Evolution of A356 Al Alloy During Flow Along a Cooling Slope. Transactions of the Indian Institute of Metals, 65 (6). pp. 669-672.

Banerjee, Partha Sarathi and Roychoudhury, Amit and Karmakar, Santanu Kumar (2012) Biomechanical Remedies for Degeneration of Cervical Spine—A Review of Literature. Journal of Medical Imaging and Health Informatics, 2 (4). pp. 343-351.

Chatterjee, Debabrata (2012) Mechanism of -O–O- bond activation and catalysis by RuIII-pac complexes (pac = polyaminocarboxylate). Journal of Chemical Sciences, 124 (6). pp. 1145-1150.

Das, Prosenjit and Samanta, Sudip K. and Chattopadhyay, Himadri and Dutta, Pradip (2012) Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy. Acta Metallurgica Sinica (English Letters), 25 (5). pp. 329-339.

Mandal, Nilrudra and Doloi, Biswanath and Mondal, Biswanath (2012) Force Prediction Model of Zirconia Toughened Alumina (ZTA) Inserts in Hard Turning of AISI 4340 Steel Using Response Surface Methodology. International Journal of Precision Engineering and Manufacturing, 13 (9). pp. 1589-1599.

Chatterjee, Dipankar and Chatterjee, Kanchan and Mondal, Bittagopal (2012) Control of Flow Separation Around Bluff Obstacles by Transverse Magnetic Field. Journal of Fluids Engineering, 134. 091102 (1-11).

Saha, Suman and Das, Saptarshi and Das, Shantanu and Gupta, Amitava (2012) A conformal mapping based fractional order approach for sub-optimal tuning of PID controllers with guaranteed dominant pole placement. Communications in Nonlinear Science and Numerical Simulation, 17 (9). pp. 3628-3642. ISSN 1007-5704

Mondal, Sudip and Bardhan, Rajashree and Mondal, Biswanath and Dey, Apurba and Mukhopadhyay, Sudit S. and Roy, Syamal and Guha, Rajan and Roy, Koushik (2012) Synthesis, characterization and in vitro cytotoxicity assessment of hydroxyapatite from different bioresources for tissue engineering application. Bulletin of Materials Science , 35 (4). pp. 683-691.

Jain, Ravi K. and Majumder, Somajoyti and Dutta, Ashish (2012) Multiple path generation by a flexible four-bar mechanism using ionic polymer metal composite. Journal of Intelligent Material Systems and Structures, 23 (12). pp. 1379-1393.

Dasgupta, Ranjan Kumar and Mondal, Dipak Kumar and Chakrabarti, Ajit Kumar and Ganguli, Ashis Chandra (2012) Microstructure and Mechanical Properties of As-Cast Ductile Irons Alloyed with Manganese and Copper. Journal of Materials Engineering and Performance, 21 (8). pp. 1728-1736.

Das, Prosenjit and Singh, I.V. and Jayaganthan, R. (2012) An Experimental Evaluation of Material Properties and Fracture Simulation of Cryorolled 7075 Al Alloy. Journal of Materials Engineering and Performance, 21 (7). pp. 1167-1181. ISSN 1059-9495

Dutta, Samik and Das, Arpan and Barat, Kaustav and Roy, Himadri (2012) Automatic characterization of fracture surfaces of AISI 304LN stainless steel using image texture analysis. Measurement, 45 (5). pp. 1140-1150. ISSN 0263-2241

Murugan, T. and De, S. (2012) Numerical visualization of counter rotating vortex ring formation ahead of shock tube generated vortex ring. Journal of Visualization, 15 (2). pp. 97-100.

Ray, B. and Biswas, G. and Sharma, A. (2012) Oblique Drop Impact on Deep and Shallow Liquid. Communications in Computational Physics, 11 (4). pp. 1386-1396.

Mahata, S. and Nandi, M.M. and Mondal, B. (2012) Preparation of high solid loading titania suspension in gelcasting using modified boiling rice extract (MBRE) as binder. Ceramics International, 38 (2). pp. 909-918.

Chatterjee, Debabrata and Ghosh, Sarita and Pal, Ujjwal and Mukhopadhyay, Sudit (2012) Redox Reactions of a [RuIII(hedtra)(pz)] Complex with Biochemically Important Reductants: Kinetic, Mechanistic and Antimicrobial Studies. European Journal of Inorganic Chemistry, 2012 (4). pp. 678-683.

Roy, H. and Sivaprasad, S. and Tarafder, S. and Ray, K.K. (2012) Cyclic fracture behaviour of 304LN stainless steel under load and displacement control modes. Fatigue & Fracture of Engineering Materials & Structures, 35 (2). pp. 108-113.

Das, Debashis and Chatterjee, Abhijit (2012) A comparison of hardened properties of fly-ash-based self-compacting concrete and normally compacted concrete under different curing conditions. Magazine of Concrete Research, 64 (2). pp. 129-141. ISSN 0024-9831

Murugan, T. and De, S. and Dora, C.L. and Das, D. (2012) Numerical simulation and PIV study of compressible vortex ring evolution. Shock Waves, 22 (1). pp. 69-83.

Mandal, Nilrudra Mandal and Roy, H. and Mondal, B. and Murmu, N.C. and Mukhopadhyay, S.K. (2012) Mathematical Modeling of Wear Characteristics of 6061 Al-Alloy-SiCp Composite Using Response Surface Methodology. Journal of Materials Engineering and Performance, 21 (1). pp. 17-24. ISSN 1059-9495

Chatterjee, Abhijit and Chatterjee, Anindya (2012) Use of the Fréchet distribution for UPV measurements in concrete. NDT & E International, 52. pp. 122-128.

Chatterjee, Dipankar (2012) Triggering Vortex Shedding by Superimposed Thermal Buoyancy Around Bluff Obstacles in Cross-Flow at Low Reynolds Numbers. Numerical Heat Transfer, Part A, 61. pp. 800-806. ISSN 1040-7782

Ruj, Biswajit and Chatterjee, Pradip Kumar (2012) Toxic release of chlorine and off-site emergency scenario - A case study. Journal of Loss Prevention in the Process Industries, 25. pp. 650-653. ISSN 0950-4230

Ganguly, A. and Chatterjee, P.K. and Dey, A. (2012) Studies on ethanol production from water hyacinth — A review. Renewable and Sustainable Energy Reviews, 16. pp. 966-972. ISSN 1364-0321

Azad, M. S. and Puri, A. B. (2012) Simultaneous optimisation of multiple performance characteristics in micro-EDM drilling of titanium alloy. International Journal Advanced Manufacturing Technology, 61. pp. 1231-1239.

Sarkar, S. and Patra, S. and Bera, S.K. and Paul, G.K. and Ghosh, R. (2012) Rectifying properties of sol–gel synthesized Al:ZnO/Si(N–n) thin film heterojunctions. Physica E, 46. pp. 1-5. ISSN 1386-9477

Chatterjee, Debabrata and Banerjee, Priyabrata and K, Jagadeesh C. Bose and Mukhopadhyay, Sudit (2012) Peroxydisulfate activation by [RuII(tpy)(pic)(H2O)]+. Kinetic, mechanistic and anti-microbial activity studies. Dalton Transactions, 41. pp. 2694-2698.

Nandi, Arup Kumar (2012) Modelling and Analysis of Cutting Force and Surface Roughness in Milling Operation Using TSK-Type Fuzzy Rules. Journal of the Brazilian Society of Mechanical Sciences and Engineering, XXXIV (1). pp. 49-61.

Sarkar, Sandip and Ganguly, Suvankar and Biswas, G. (2012) Mixed convective heat transfer of nanofluids past a circular cylinder in cross flow in unsteady regime. International Journal of Heat and Mass Transfer, 55. pp. 4783-4799. ISSN 0017-9310

Chatterjee, Dipankar and Biswas, Gautam and Amiroudine, Sakir (2012) Mixed Convection Heat Transfer from an In-Line Row of Square Cylinders in Cross-Flow at Low Reynolds Number. Numerical Heat Transfer, Part A, 61. pp. 891-911. ISSN 1040-7782

Saha, Atanu and Mondal, Dipak Kumar and Biswas, Koushik and Maity, Joydeep (2012) Microstructural modifications and changes in mechanical properties during cyclic heat treatment of 0.16% carbon steel. Materials Science and Engineering A, 534. pp. 465-475. ISSN 0921-5093

Jain, R.K. and Majumder, S. and Dutta , A. (2012) Microassembly by an IPMC-based flexible 4-bar mechanism. Smart Material and Structures, 21. 075004 (1-15).

Chatterjee, Debabrata and Eldik, Rudi van (2012) Mechanism of -O-O- bond activation and substrate oxidation by Ru-edta complexes. Journal of Molecular Catalysis A: Chemical, 355. pp. 61-68. ISSN 1381-1169

Chatterjee, Anjali and Bhattacharjee, Partha and Roy, Nirmal Kumar (2012) Mathematical model for predicting the state of health of transformers and service methodology for enhancing their life. Electrical Power and Energy Systems, 43. pp. 1487-1494. ISSN 0142-0615

Meena, Vijay Kumar and Azad, Man Singh (2012) Grey Relational Analysis of Micro-EDM Machining of Ti-6Al-4V Alloy. Materials and Manufacturing Processes, 27. pp. 973-977. ISSN 1042-6914

Nandi, Arup Kumar and Deb, Kalyanmoy and Ganguly, Subhas and Datta, Shubhabrata (2012) Investigating the role of metallic fillers in particulate reinforced flexible mould material composites using evolutionary algorithms. Applied Soft Computing, 12. pp. 28-39. ISSN 1568-4946

Ghosh, D. and Mitra, S.K. (2012) Influence of Alloy Grain Size on High Temperature Corrosion Behavior of 2.25 Cr-1 Mo Steel in SO2+O2 Atmosphere. High Temperature Materials and Processes, 31. pp. 727-731.

Chatterjee, Dipankar and Mondal, Bittagopal (2012) Forced Convection Heat Transfer from Tandem Square Cylinders for Various Spacing Ratios. Numerical Heat Transfer, Part A, 61. pp. 381-400. ISSN 1040-7782

Chatterjee, Dipankar and Mondal, Bittagopal (2012) Forced convection heat transfer from an equilateral triangular cylinder at low Reynolds numbers. Heat Mass Transfer, 48. pp. 1575-1587.

Thangadurai, Murugan and Das, Debopam (2012) Experimental study on a compressible vortex ring in collision with a wall. Journal of Visualization, 15. pp. 321-332.

Ganguly, A. and Gupta, A. and Das, S. and Dey, A. and Chatterjee, P.K. (2012) Enzymatic Hydrolysis of Water Hyacinth Substrate by Cellulase, Xylanase and � Glucosidase: Experiments and Optimization. Journal of Biobased Materials and Bioenergy, 6 (3). pp. 1-9. ISSN 1556-6560

Pal, A. and Bandyopadhyay, D. and Biswas, G. and Eswaran, V. (2012) Enhancement of Heat Transfer Using Delta-Winglet Type Vortex Generators with a Common-Flow-up Arrangement. Numerical Heat Transfer, Part A, 61. pp. 912-928. ISSN 1040-7782

Nandi, A. K. and Datta, S. and Orkus, J. (2012) Effective Properties of Particle Reinforced Polymeric Mould Material Towards Reducing Cooling Time in Soft Tooling Process. Journal of Applied Polymer Science, 124. pp. 2567-2581.

Mukherjee, A. and Basu, S. and Chakraborty, G. and Pal, M. (2012) Effect of Y-doping on the electrical transport properties of nanocrystalline BiFeO3. Journal of Applied Physics, 112. 014321 (1-8). ISSN 0021-8979

Chatterjee, Dipankar and Mondal, Bittagopal (2012) Effect of Thermal Buoyancy on the Two-Dimensional Upward Flow and Heat Transfer Around a Square Cylinder. Heat Transfer Engineering, 33 (12). pp. 1063-1074. ISSN 0145-7632

Pal, Ujjwal and Ghosh, Sarita and Chatterjee, Debabrata (2012) Effect of sacrificial electron donors on hydrogen generation over visible light–irradiated nonmetal-doped TiO2 photocatalysts. Transition Metal Chemistry, 37 (1). pp. 93-96. ISSN 0340-4285

Roy, B. and Chakrabarty, S. and Mondal, O. and Pal, M. and Dutta, A. (2012) Effect of neodymium doping on structure, electrical and optical properties of nanocrystalline ZnO. Materials Characterization , 70. pp. 1-7. ISSN 1044-5803

Saha, Atanu and Kumar Mondal, Dipak and Biswas, Koushik and Maity, Joydeep (2012) Development of high strength ductile hypereutectoid steel by cyclic heat treatment process. Materials Science and Engineering A, 541. pp. 204-215. ISSN 0921-5093

Dutta, S. and Datta, A. and Das Chakladar, N. and Pal, S.K. and Mukhopadhyay, S. and Sen, R. (2012) Detection of tool condition from the turned surface images using an accurate grey level co-occurrence technique. Precision Engineering, 36. pp. 458-466. ISSN 0141-6359

Nandi, Arup Kumar and Datta, Shubhabrata and Deb, Kalyanmoy (2012) Design of particle-reinforced polyurethane mould materials for soft tooling process using evolutionary multi-objective optimization algorithms. Soft Computing, 16 (6). pp. 989-1008. ISSN 1432-7643

Mistry, Kalyan Kumar and Mahapatra, Abhijit (2012) Design and simulation of a thermo transfer type MEMS based micro flow sensor for arterial blood flow measurement. Microsystem Technologies, 18. pp. 683-692.

Das, Prosenjit and Singh, Indra Vir and Jayaganthan, R. (2012) Crack growth simulation of bulk and ultrafine grained 7075 Al alloy by XFEM. International Journal of Materials and Product Technology, 44 (3/4). pp. 252-276.

Ray, Bahni and Biswas, Gautam and Sharma, Ashutosh Sharma (2012) Bubble pinch-off and scaling during liquid drop impact on liquid pool. Physics of Fluids , 24. 082108 (1-11). ISSN 1070-6631

Ragit, S.S. and Mohapatra, S.K. and Gill, Prashant and Kundu, K. (2012) Brown hemp methyl ester: Transesterification process and evaluation of fuel properties. Biomass and Bioenergy, 41. pp. 14-20. ISSN 0961-9534

Biswas, Gautam and Chattopadhyay, Himadri and Sinha, Anupam (2012) Augmentation of Heat Transfer by Creation of Streamwise Longitudinal Vortices Using Vortex Generators. Heat Transfer Engineering, 33 ((4-5)). pp. 406-424. ISSN 0145-7632

Loha, Chanchal and Chattopadhyay, Himadri and Chatterjee, Pradip K. (2012) Assessment of drag models in simulating bubbling fluidized bed hydrodynamics. Chemical Engineering Science, 75. pp. 400-407. ISSN 0009-2509

Chatterjee, Abhijit and Das, Debashis (2012) Assessing concrete quality in structures through statistical interpretation of ultrasonic pulse velocity measurements. Magazine of Concrete Research, 64 (8). pp. 717-725.

Chattopadhyay, Himadri and Kundu, Arindam and Saha, Binod K. and Gangopadhyay, Tapas (2012) Analysis of flow structure inside a spool type pressure regulating valve. Energy Conversion and Management, 53. pp. 196-204. ISSN 0196-8904

Chatterjee, Dipankar (2012) A Lattice Boltzmann Model for High-Energy Materials Processing Application. Journal for Multiscale Computational Engineering, 10 (3). pp. 229-247. ISSN 1543–1649

Chandra, Prakash and Satyamurty, V.V. (2012) Effect of anisotropy on natural convective flow through a rectangular porous slab. Journal of Porous Media, 15 (6). pp. 595-605.

Dasgupta, R.K. and Mondal, D.K. and Chakrabarti, A.K. and Ganguli , A.C. (2012) Kinetics of austenitisation of ductile irons containing two different contents of manganese and copper. International Journal of Cast Metals Research , 25 (4). pp. 239-245.